Engineering Drawing (graphics) (Mechanical Drawing - AutoCAD - Inventor - SolidWorks)

Àpd 29.56 C$ /h

Engineering drawings are used to communicate design ideas and technical information to engineers and other professionals throughout the design process. An engineering drawing represents a complex three-dimensional object on a two-dimensional piece of paper or computer screen by a process called projection.

Lieu

En ligne depuis Égypte

Présentation

I have more than 14 years of experience in teaching and tutoring university students (face to face and online) at different levels and different education systems. I am an engineer and I got my Master degree and currently working on my PhD.
You can rely on me to let you understand then apply to get the outcomes of your lessons. Also, you can ask me to help you understand the required from exams and quizzes to make sure you will answer them correctly and get high scores on your own I promise because, this is what we do.

Education

Master of Science in Mechanical Engineering (Jul, 2017) - Faculty of engineering, Helwan university.
BSc in mechanical Engineering (Jul, 2010) - Faculty of engineering - Helwan university.

Expérience / Qualifications

14 years of experience in teaching and tutoring university students (face to face and online) at different levels and different education systems.

Age

Adolescents (13-17 ans)

Adultes (18-64 ans)

Niveau du Cours

Débutant

Intermédiaire

Avancé

Durée

60 minutes

Enseigné en

anglais

arabe

Compétences

Ingénierie

Génie mécanique

Graphisme (conception graphique)

Commentaires

Disponibilité semaine type

(GMT -05:00)

New York

Cours par webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Physics (Classical Mechanics) (Statics and Dynamics "Kinematics and Kinetics")

29.56 C$ /h

Statics and dynamics are the main subjects for level one engineering students.
You will understand these subjects perfectly.
Together, you will understand vectors, motion in multiple directions, relative motion, Newton's laws of motion, .... and simple harmonic motion.

Mechanics of Materials (Stress Analysis - strength of materials)

29.56 C$ /h

Mechanics of materials (or strength of materials) is a branch of engineering that analyzes the behavior of solid objects subject to various loads, focusing on deformation, stress, strain, and failure. It determines the internal resistance of components (e.g., beams, columns, shafts) to ensure structural safety. Key concepts include elasticity, plasticity, torsion, bending, and material stress-strain relationships.

Gaëlle

5.0

(3)

Most kids think coding is for "smart kids" or "future programmers."
It's not. Coding is how real people solve real problems.
In this class, we skip the theory. Your child creates real things.

What they'll do:
✓ Build real projects in Scratch: a working game, an interactive animation, a story they coded
✓ Program virtual robots: solve real-world challenges (navigate a maze, automate a task, build a system)
✓ Create in Minecraft Education: design worlds, automate constructions, solve logic problems
✓ Experiment with different languages: not just learn "the right way," but understand that there are many ways to think about a problem
✓ Collaborate and share: work with other kids, get feedback, improve their work
✓ Develop logical thinking: not just for coding, but for anything: solving math problems, science challenges, real-world situations

Why this is different:
We don't teach syntax. We teach how programmers think.
Most children's coding courses say "here's the code, copy it." We teach "what problem are we trying to solve? How could we break it into steps? What options do we have?"
When your child learns to think like a programmer, they can learn any language afterward.

What they take home:
A portfolio of 3–4 completed, working projects. The ability to say "I built this." And the deep understanding that code is a tool to make real things happen.

Format: Online or Barcelona | 60–90 min sessions | Flexible pace, no prior experience needed
For curious 8-12 year olds who want to build.

Matías

5.0

(3)

Do you want to master the most used design software and bring your ideas to life in 3D? Do not search anymore ! I offer specialized courses to guide you through the exciting worlds of CATIA V5/V6, Inventor, Fusion 360, FreeCAD and 3D printing.

CATIA V5/V6: Discover the design software preferred by engineers for creating complex models and precise assemblies.

Inventor: Dive into the world of mechanical design and learn how to develop innovative products with this powerful software.

Fusion 360: Create organic models, run simulations, and hone your design and engineering skills.

FreeCAD: Explore the basics of parametric design and create 3D models ready for manufacturing.

️ 3D printing: Bring your designs to life! Learn how to use 3D printers, from modeling to concrete production.

Whether you're a beginner or looking to improve your skills, my classes are suitable for all levels. With interactive lessons, hands-on projects, and expert guidance, you'll progress quickly and with confidence.

Don't wait to explore the endless potential of 3D design and 3D printing. Join me on this exciting adventure and start creating your own 3D masterpieces today!

Don't miss this opportunity to develop in-demand skills in 3D design and printing. Join me for enriching and practical lessons you won't forget!

See you soon for our first class together!

Jeremy

5.0

(3)

Passionate & empathetic teacher. I have a Master's in Physics with honors from the University of Leicester (which was featured at the time as a top 5 Physics university in the UK by The Guardian) and a - french - European School diploma in which I achieved 90% in Physics and 85% in Maths.

Helping others understand difficult topics and skills is something that I am very passionate about as an empathetic person. I have experience teaching Physics and Maths to kids from unprivileged backgrounds at the homework school in Saint-Gilles (CASG du Service Social Juif asbl) as well as 5 years of private teaching.

In my classes, I aim to:

- help students achieve better grades in exams/tests in all branches of Physics & Maths
- clearly explain and break down topics
- give context and or example applications of topics (to improve understanding and memorization)
- help with ADHD & other learning disabilities
- give practical advice for university applications (eg. UCAS in the UK) and discuss the exciting Physics research/work and projects you can work on later in life.

Physics has a plethora of useful and fascinating applications, from the detection of Gravitational Waves and Gamma-Ray Bursts to the development of novel Medical Imaging techniques and Nano-technology (eg: smartphones). It is a subject that I am very passionate about and I hope to make use of my years of experience and extensive knowledge to help you understand and love the subject! My lessons will always be tailored to the individual needs of the student, so please do not hesitate to contact me if you have questions!

Youssef

5.0

(3)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Amine

5.0

(3)

🌟 Course for Beginners - Discover the Secrets of Adobe Photoshop! 🌟

Have you always wanted to master Adobe Photoshop, but the features seem intimidating? Do not worry anymore! I offer courses specially designed for beginners, to guide you step by step into the fascinating world of Photoshop.

🖌️ What you will learn:

The essential basics of the Photoshop interface.
Image editing tools to improve your photos.
Creating simple and impactful designs.
🗓️ Flexible hours:
Choose sessions that fit your busy schedule.

🎓 Experienced Trainer:
Benefit from the expertise of an experienced trainer who will guide you through each step, allowing you to unleash your creativity.

Francisco

5.0

(3)

With 7+ years' experience in education, I have coached over 50 students to improve their academic results and boost their confidence in math and physics.

My tutoring services always include a personalized plan for each student. This plan is established during the first session where I like to meet the student, better understand their difficulties and get to know their schedule.

In the first session, we will:

- Get to know each other.
- Understand the student's strengths and identify areas for improvement.
- Understand the student's needs and difficulties.
- Get to know the student's schedule.
- Create a tutoring plan

Typically, sessions take place as follows:
i. Theoretical review of complex concepts in simple terms
ii. Tips for solving problems
iii. Abundance of exercises from my databases (exams, exercises)

If you are interested in my services, please provide the following information when contacting me:

- School system (French Bac, Matu, IB, A-levels)
- Location of tutoring (or video tutoring if applicable)
- Number of sessions per week and preferred days and times of the week (this can also be discussed after the first session, if you prefer)

Check out my profile if you want to know more about me :)

See you soon,
Francisco

Ayoub

5.0

(3)

This preparation session is dedicated to students aiming for preparatory classes for scientific Grandes Ecoles (CPGE), with a particular focus on the subjects of Physics and Engineering Sciences. The goal is to strengthen the foundations and deepen the knowledge to succeed.

1. Mechanics:
Kinematics: Study of rectilinear and circular movements, position vectors, speed and acceleration.
Dynamics: Newton's laws, work and energy, kinetic energy theorem.

2. Electromagnetism / Electrokinetics:
Electrostatics: Electric charges and fields, electric potential, capacitance.
Magnetostatics: Magnetic fields, Lorentz forces, electromagnetic induction.
Alternating Currents: RLC circuits, resonance, impedance.

3. Thermodynamics:
Principles of thermodynamics: Internal energy, heat, work, first and second principles.
Ideal and real gases: Equations of state, thermodynamic transformations.

4. Industrial sciences:
Automatic Linear, Kinematic, Static.

For more information and to register for the preparation session, please contact me.

Good preparation and success in your studies!

.

Marcos

5.0

(3)

80% of my students got accepted in the 2025 exam, I am sure I can help you out in the 2026 exam!

TU Delft is Europe's most prestigious university for aerospace studies, preparing some of the best engineers. However the selection procedure is tough and demanding, and only those prepared have a chance to succeed.

As a TU Delft student, I know from first hand how stressfull this process is, and can therefore help you succeed in the preparation of these exams. I have previous experience as a tutor back in high school, helping students improve their grades from Cs to As.

Moreover, I have an extensive knowledge on the subjects tested on these exams, having taken them myself, completed the courses at university with excellent grades and teaching over 10 students for the entrance exam.

Throughout the class, I will use a presentation to explain the main concepts of each exam (Maths, Physics and Aerospace Engineering), focusing on those subjects the student is struggling with most. After this, I will help the student complete some practice excercises, and then assign extra practice to complete on their own time. These exercises will then be reviewed in the following class to ensure the topics have been understood.

I am looking forward to help you in your journey as an aerospace engineer!

Mohamed

5.0

(3)

Praise be to God, high competence with academic qualifications and acquired experience.
Good explanation with fluent language and providing a pleasant atmosphere
For review and support to achieve the best possible result, God willing.
With a pre-review of the lessons to ensure the success of the session and to gain the greatest possible benefit, adherence to the teacher's instructions, and provision of school supplies.

Philippe

5.0

(3)

Ce cours est un accompagnement personnalisé de projets graphiques, destiné aux étudiants, jeunes professionnels ou créatifs souhaitant confronter leur travail à un regard professionnel, ancré dans des contraintes réelles de production.

Nous travaillerons à partir de vos propres projets (print, identité visuelle, illustration, affiche, branding, communication digitale...), en abordant à la fois les aspects créatifs, techniques et stratégiques : intention graphique, cohérence visuelle, lisibilité, hiérarchisation, choix typographiques, couleurs, formats et adaptation aux supports.

L’objectif n’est pas seulement d’« améliorer un visuel », mais de comprendre pourquoi faire certains choix, comment défendre une intention, répondre à un brief client, et produire un travail juste, efficace et professionnel, comme en agence ou en freelance.

Le cours s’adapte entièrement à votre niveau, à vos objectifs (portfolio, projet scolaire, projet client, reconversion, pratique personnelle) et à votre rythme.

Zouhair

5.0

(3)

Are you looking to master the tools of interior design from a professional perspective? This class is designed for students, fresh graduates, and professionals who want to move beyond basic software knowledge and learn the "real-world" secrets of the industry.

With over 18 years of experience as an Interior Architect, I don't just teach you which buttons to click; I teach you how to execute professional projects, manage technical constraints, and create stunning visual results.

What you will learn:
AutoCAD: Drafting precise floor plans, sections, and technical details.
3ds Max & V-Ray: Creating photorealistic 3D renders with advanced lighting and texturing.
Photoshop: Post-production techniques to make your designs stand out.
Project Workflow: How to take a project from a simple concept to a professional execution file.

Teaching Approach:
Practice-Oriented: We work on real project examples, not just abstract theories.
Tailored Lessons: Every session is adapted to your specific level and goals.
Efficiency: I focus on the shortcuts and professional habits that will save you hours of work.

Who is this for?
Architecture and Design students.
Professionals looking to upgrade their 3D rendering skills.
Hobbyists who want to start a career in Interior Design.

Jammal

5.0

(3)

Hi, my name is Jammal and I give math and physics lessons for all school levels.
I'm an aerospace engineer and I'm training to be an airline pilot :)

Arthur

5.0

(3)

I offer tailored support, adapted to the level, objectives and pace of each student.
Whether it's to fill gaps in knowledge, prepare for a test, train effectively before an exam, or work on long-term preparation for university exams, each session is structured and targeted.
The goal: to make concrete progress, gain method and confidence, with clear, effective and truly personalized teaching.

Yannis

5.0

(3)

With over 5 years of experience working with middle and high school students, I help them understand, progress quickly, and regain confidence. I adapt entirely to each student through:
- Attentive listening and dialogue to identify the real difficulties
- Clear and appropriate explanations
- Targeted work on points not understood
- Interactive lessons with questions and knowledge assessment

Typical lesson: brief review, explanations + guided exercises, verification and consolidation

Benjamin

5.0

(3)

Course Description

This Graphic Design course – Adobe Suite (Illustrator, Photoshop, InDesign, etc.) aims to train apprentices in the essential tools and methods of professional graphic design.

Participants will learn to design visual materials adapted to different contexts: posters, flyers, logos, digital publications, content for social networks and printed documents.

The program covers, in particular:

The basics of graphic design (composition, colors, typography, visual hierarchy)

Creating and editing images with Photoshop

Vector drawing and logo creation with Illustrator

Professional page layout with InDesign

Best practices for exporting and preparing files (print & digital)

Through practical exercises and concrete projects, apprentices will develop their creativity while acquiring a structured work methodology adapted to the professional world.

This course is aimed at beginners or those wishing to consolidate their basic skills in digital graphics.