Mechanical Engineering and Engineering Tutor (Online) | Thermodynamics, Solid Mechanics, Dynamics, Control Systems, Engineering Materials

From 49.01 $ /h

If you want clear, exam-ready Engineering and Mechanical Engineering help, this is a strong fit.

My difference: you send your materials first, I confirm fit, then we use a repeatable system that builds results fast.

FAST START (SEND MATERIALS FIRST)
---------------------------------------------------
Send your syllabus or PDF slides, past papers, tutorial sheets, or assignment brief.

I confirm fit before we book. If it is outside my strengths, I will tell you directly.

WHAT I HELP WITH (HIGH-INTENT TOPICS)
---------------------------------------------------
• Thermodynamics
• Solid Mechanics / Strength of Materials
• Engineering Dynamics
• Control Systems
• Engineering Materials
• MATLAB + Simulink (modelling, simulation, verification)

HOW EACH LESSON WORKS (TYPICAL SESSION)
---------------------------------------------------
1) Diagnose
• identify the exact weak point, concept, method, or exam technique

2) Build (clear and fast)
• definitions, assumptions, units, sign conventions
• diagrams where needed (FBD, shear and moment, block diagrams)

3) Solve (guided)
• I show the method on a representative question
• you solve a similar one with live correction
• quick checks, units, limits, sanity

4) Exam mode (when relevant)
• past papers, mark schemes, what earns marks
• speed, structure, presentation

AFTER EACH LESSON (WHAT YOU RECEIVE)
---------------------------------------------------
• short revision note, key method + mistakes to avoid
• focused practice list
• progress note, strengths, gaps, next targets

Optional: recorded session for revision

MATLAB / SIMULINK SUPPORT (WHEN NEEDED)
---------------------------------------------------
• modelling, simulation, plotting, debugging
• verify results against theory, interpret correctly

COURSEWORK + ASSIGNMENTS (LEGIT SUPPORT ONLY)
---------------------------------------------------
• understand the brief, plan your approach, improve your method
• review your work, fix errors, strengthen reasoning

No done-for-you submissions, no cheating.

MESSAGE ME LIKE THIS (FAST REPLY)
---------------------------------------------------
1) Level:
2) Module/Course name:
3) Exam date or deadline:
4) Topics:
===================================

Extra information

You can review the above description for information, and don't hesitate to contact me to ask any questions. You're welcome...

Location

Online from United Kingdom

About Me

I am an Aerospace Engineering student at the Institute of Space Technology, Islamabad, and an experienced online tutor for engineering and STEM subjects. I help students develop real understanding in engineering topics through clear explanations, structured lessons, and step-by-step problem solving. My approach is not based on rushed memorisation. It is based on concept clarity, logical thinking, and practical application.

I work with students at school, college, and university level who need help in engineering fundamentals, mathematics for engineering, physics-based reasoning, assignments, exam preparation, and technical confidence. I particularly enjoy supporting students who find engineering overwhelming and want a tutor who can break difficult topics into manageable parts. My aim is to help students improve both their grades and their way of thinking, so they can solve problems independently and perform better over the long term.

Education

Education

B.E. Aerospace Engineering, Institute of Space Technology, Islamabad
Senior-year undergraduate student

Relevant academic background in engineering mechanics, thermodynamics, aerodynamics, control systems, propulsion, numerical analysis, CAD, artificial intelligence, digital systems, and spacecraft dynamics

Experience / Qualifications

I have been teaching online for several years and have worked with students across different levels in STEM and technical subjects. My tutoring experience includes helping students strengthen weak concepts, improve problem-solving ability, prepare for exams, and handle assignments with a more structured method.

As an Aerospace Engineering student, I bring an applied engineering perspective to my lessons. I do not only explain theory, I connect concepts with real engineering logic and practical understanding. I am best suited for students who want disciplined, concept-focused support in engineering-related subjects and who value a patient tutor with a systematic teaching approach.

Age

Children (7-12 years old)

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

The class is taught in

English

Urdu

Panjabi

Hindi

Skills

Engineering

Mechanical engineering

Thermodynamics

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Matías

4.88

(85)

Do you aspire to master mathematics, physics and engineering at a university level? Do you want to exceed your limits and excel in these demanding fields? Do not search anymore ! Our tailor-made private lessons are there for you.

Why choose our courses?

Unparalleled Expertise: Our professors are experts in their field, with extensive experience in university teaching. They are ready to guide you towards success.

Personalized Program: We tailor each course to your specific needs, from understanding fundamental concepts to solving complex problems.

Total Flexibility: Choose the schedule that suits you best. Whether you are an active student or a professional, we adapt to your schedule.

Constant Support: You will benefit from continuous monitoring between classes to answer all your questions and concerns.

Quality Teaching Materials: We provide high-quality learning resources to support your progress.

Who can benefit from our courses?

High school students preparing for their baccalaureate or entrance exams to engineering schools.

University students pursuing a degree in mathematics, physics or engineering.

Professionals looking to acquire or deepen technical skills.

Join us today!

Excellence doesn't wait. Contact us now to book your first lesson. Together we will build a bright future based on a solid understanding of mathematics, physics and engineering.

Yas

4.88

(85)

As an engineer, I would like to help other students navigate the sometimes complex world of mathematics and physics. During my studies, I tutored for 6 years in secondary schools in the region of The Hague, Delft, Rotterdam and Antwerp. I try to go through the course material interactively with the student and link theoretical concepts as much as possible to examples from our daily lives in order to prepare and motivate the student.

So if you would like tutoring on one or more subjects in mathematics or physics, you can contact me.

I tutor students from primary and secondary education to higher education. From multiplication tables to quadratic equations, logarithmic and exponential functions, limits, derivatives, integrals,... Everything is possible!

Jeremy

4.88

(85)

Passionate & empathetic teacher. I have a Master's in Physics with honors from the University of Leicester (which was featured at the time as a top 5 Physics university in the UK by The Guardian) and a - french - European School diploma in which I achieved 90% in Physics and 85% in Maths.

Helping others understand difficult topics and skills is something that I am very passionate about as an empathetic person. I have 5 years of experience teaching Physics and Maths to kids from unprivileged backgrounds at the homework school in Saint-Gilles (CASG du Service Social Juif asbl) as well as via private teaching.

In my classes, I aim to:

- help students achieve better grades in exams/tests in all branches of Physics & Maths
- clearly explain and break down topics
- give context and or example applications of topics (to improve understanding and memorization)
- help with ADHD & other learning disabilities
- give practical advice for university applications (eg. UCAS in the UK) and discuss the exciting Physics research/work and projects you can work on later in life.

Physics has a plethora of useful and fascinating applications, from the detection of Gravitational Waves and Gamma-Ray Bursts to the development of novel Medical Imaging techniques and Nano-technology (eg: smartphones). It is a subject that I am very passionate about and I hope to make use of my years of experience and extensive knowledge to help you understand and love the subject! My lessons will always be tailored to the individual needs of the student, so please do not hesitate to contact me if you have questions!

Reza

4.88

(85)

I hold a PhD in Mechanical Engineering and currently, I am working as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).

I have extensive experience in teaching various Mechanical design packages, including LS-DYNA, ANSYS, APDL programming, ABAQUS, MATLAB, SolidWorks, Cura, and Symbolic MATLAB.

Some of the finite element modeling and numerical simulations I have worked on include:
- Multiscale finite element modeling for fatigue crack propagation in porous materials.
- Analysis of multiple-layer sandwich structures' resistance to bird-strike impact [Read paper].
- Investigation of debonding propagation in aluminum and glass/epoxy composite joints under fatigue loading using Fracture Mechanics principles.
- Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials.
- Study of the effect of material type, stacking sequence, and impact location on pedestrian head injury in collisions.

If you have any additional questions before starting the class, please don't hesitate to ask me. I am here to help! :)

Youssef

4.88

(85)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Samaa

4.88

(85)

With over 4 years of experience I teach math curriculums (GCSE, IGCSE, IB CNISE, SAT) to students from earlier stages, elementary to high school. I focus on all mathematical concepts, develop classroom materials, organize activities, assign homework, grade tests, and prepare students for exams. I prepare mathematics curriculum for my students, like college entrance exams.

I demonstrate excellent mathematics skills and analytical thinking alongside solid instruction. I instruct my students throughout the year and create lesson plans, assign homework, and manage online classrooms. I keep in touch with parents to be aware of the progress.
I hold a Master's degree in Engineering with teacher education courses and I've achieved the highest grades in my math courses throughout the years with straight A Grades.

My Responsibilities towards my students
-Create a great environment that is conducive to learning.
-Care for and effectively assist students with special concerns.
-Analyze data to determine student progress and achievement.
-Work with individual and small groups of students to support mathematics instruction.
-Encourage students who need extra help
-Plan and carry out instructions, activities and prepare learning materials.
-Maintain appropriate records and follow required procedures and practices.
-Work with students to develop and monitor academic goals for both short-term and long-term success.

My qualifications
-Master Degree in Engineering
-An experienced teacher for over 4 years
-Experience with calculus, geometry, statistics, and trigonometry.
-Dedication to instruction of critical thinking and problem-solving with confidence in a collaborative environment.
- Leadership skills and a positive attitude when assisting with decision making.
-Demonstrated professionalism and dedication to continuous improvement.
-Time management skills.

Ayoub

4.88

(85)

This preparation session is dedicated to students aiming for preparatory classes for scientific Grandes Ecoles (CPGE), with a particular focus on the subjects of Physics and Engineering Sciences. The goal is to strengthen the foundations and deepen the knowledge to succeed.

1. Mechanics:
Kinematics: Study of rectilinear and circular movements, position vectors, speed and acceleration.
Dynamics: Newton's laws, work and energy, kinetic energy theorem.

2. Electromagnetism / Electrokinetics:
Electrostatics: Electric charges and fields, electric potential, capacitance.
Magnetostatics: Magnetic fields, Lorentz forces, electromagnetic induction.
Alternating Currents: RLC circuits, resonance, impedance.

3. Thermodynamics:
Principles of thermodynamics: Internal energy, heat, work, first and second principles.
Ideal and real gases: Equations of state, thermodynamic transformations.

4. Industrial sciences:
Automatic Linear, Kinematic, Static.

For more information and to register for the preparation session, please contact me.

Good preparation and success in your studies!

.

Roland

4.88

(85)

The TU Delft Aerospace Engineering Bachelor is one of the most prestigious bachelor programmes the Netherlands has to offer. With it being highly sought-after by students all around the globe, there is a highly competitive selection procedure which needs to be completed to get admitted to this popular degree. A massive part of this admission procedure is the selection exam, consisting of three different tests: Mathematics, Physics and First-Year Material.

As a cum laude graduated Aerospace Engineer at TU Delft, who has also been tutoring since 2017, I have a lot of valuable experience and knowledge of the program to help you out with the right preparation to get in. Moreover, after successfully helping more than 10 students secure a spot over the last three years, I have decided to prepare an additional custom lesson plan for each student, based on the admission syllabus, to ensure an even higher chance of admission.

With my calm and stepwise explanation, weaker topics will be addressed, and your solution procedures will be polished. Each lesson will either be theory, exercise-based or an opportunity to talk about the admission, student life, Delft, what to expect from the study and whether it is the right fit for you.

Emmanuel

4.88

(85)

Dive into the dynamic world of engineering and science with this comprehensive course designed for aspiring engineers and scientists. This course is structured to provide you with a robust foundation in key principles and practices that are essential in these fields.

You'll explore fundamental concepts in physics, chemistry, and mathematics, and learn how to apply these principles to solve real-world problems. The course covers critical topics such as mechanics, thermodynamics, materials science, and electrical circuits.

In addition to theoretical knowledge, you'll engage in hands-on projects and experiments that illustrate practical applications. You'll develop skills in data analysis, experimental design, and technical communication, preparing you for advanced study or a career in engineering and science.

Join us to unlock the potential of engineering and science, and start your journey towards innovation and discovery.

Marcos

4.88

(85)

80% of my students got accepted in the 2025 exam, I am sure I can help you out in the 2026 exam!

TU Delft is Europe's most prestigious university for aerospace studies, preparing some of the best engineers. However the selection procedure is tough and demanding, and only those prepared have a chance to succeed.

As a TU Delft student, I know from first hand how stressfull this process is, and can therefore help you succeed in the preparation of these exams. I have previous experience as a tutor back in high school, helping students improve their grades from Cs to As.

Moreover, I have an extensive knowledge on the subjects tested on these exams, having taken them myself, completed the courses at university with excellent grades and teaching over 10 students for the entrance exam.

Throughout the class, I will use a presentation to explain the main concepts of each exam (Maths, Physics and Aerospace Engineering), focusing on those subjects the student is struggling with most. After this, I will help the student complete some practice excercises, and then assign extra practice to complete on their own time. These exercises will then be reviewed in the following class to ensure the topics have been understood.

I am looking forward to help you in your journey as an aerospace engineer!

Intasar

4.88

(85)

I have graduated with a degree in chemical engineering from the University of Edinburgh, UK. I am also an Erasmus Mundus scholar with a master's in Analytical Chemistry from Uppsala University. Currently, I am pursuing a PhD in physical chemistry.

I have been tutoring since 2012 to fund my education expenses. I formally began tutoring in 2014 as part of my vocational training as a teacher in Ghana, funded by the University of Edinburgh. The formal training has taught me a lot about curriculum development, time management, and fusing my teaching methodology to my students’ needs. I have been tutoring in Physics, Chemistry, and Math, in person and online; the hybrid model has allowed me to reach out and teach students in 8 different countries. I have successful students from these past nine years who have not only commended my work ethic but can also stand testament to my enthusiasm.

My excellent academic career has nurtured in me a natural talent for teaching. My experiences have taught me how to tackle one problem at a time, and I believe that using this approach—paired with my unconventional examples that force students to think outside the box—I can truly provide an excellent understanding and explanation. My teaching methodology is based on two main things: skill development and adaptation. Initially, I create a skeleton of the most suitable methodology tailored to the preferred curriculum, after which, I adapt that lecture to the specific needs of the student based on their knowledge and grasp of the concepts. Second, I like to develop analytical and scientific ability along with knowledge in my students, and for that, I use a combination of resources in the form of worksheets, class tasks, and past papers. Last, I believe in the strong ethic of providing feedback to the parents, so that they are aware of their child’s progress.

Frequently Asked Questions:
Which subject(s) do you teach?
I teach math, mechanics, statistics, chemistry and physics. I also teach biology up to GCSE level.

When are you available? My timetable is quite flexible. I am happy to work weekdays, week evening and weekends.

Which ages and levels do you teach? The majority of my students are between the ages of 10-18, but I also teach college Students. I am also helping foundation and first year university students.

Which qualifications do you prepare your students for? GCSE, o-level, A/S-level, A-level, IB, School entrance exams and SATs

Describe your arrangements for online tutoring? I use Zoom online sessions since it has many tools and features specially designed for interactive and visual learning. I am fully equipped with modern gadgets for e-learning. I use Google drive and docs to share files.

Simone

4.88

(85)

I have a bachelor in Aerospace Engineering and actually finishing my master in Space Engineering in Luxembourg. I worked as a teacher in aeronautical high school where I was teaching mechanics and technical drawing. At the same time was giving private lessons on math, physics.
I am very passionate about teaching indeed still during my studies I am use to give lessons and tutoring.
Other subjects could be Italian, Aerodynamics and Structure, Algebra and Geometry from Beginner level to University level.

Mohtady

4.88

(85)

This lesson is aimed at engineering students and those interested in the field of mechatronics and practical applications, where basic and advanced concepts are presented in a simplified and smooth style that combines theoretical understanding and practical application.

The lesson will focus on explaining the ideas in a gradual way, starting from the basics and progressing to solving problems and real-world applications, using practical examples, practice exercises, and models from real projects to increase understanding and consolidate information.

Attention is also given to simplifying complex concepts, clarifying common mistakes, and providing effective methods for quick solutions, which helps the student achieve the best performance in both academic and practical application.

This lesson is suitable for beginners as well as those who have a background and wish to strengthen their skills and reach a professional level.

German

4.88

(85)

Struggling with calculus, mechanics, or electromagnetism?
Need to pass a tough course, prepare for your IB / A-Levels / Bachelor exam, or simply guarantee the highest grade?

📍 In-person in Vienna | 💻 Live online | 🔄 Hybrid model (you choose what works best)

🔥 Why learn with me?

MSc in Physics (not a peer tutor – a real expert).

4 years of private teaching experience with students aged 15–30: from high school finals to university bachelor exam preparation ("bachelor reparation").

Multilingual: English, Spanish, Italian – perfect for international students or those who want to learn science in another language.

Custom, dynamic materials – no boring lectures. Real-world examples, interactive simulations, and exam-style drills.

🎯 What you'll get:
✔️ Finally understand the logic behind formulas.
✔️ Pass with confidence – or aim for the top grade.
✔️ Study techniques that last beyond our sessions.

⚠️ Limited spots – I work with a small number of students to ensure real progress.
📲 Message me now and tell me your goal: exam prep, weekly tutoring, or an intensive bootcamp.

Muhammad

4.88

(85)

As a teaching assistant in the College of Engineering (specializing in Mechatronics Systems Engineering), I provide specialized academic support to engineering students to help them understand complex material, pass exams with distinction, and complete academic projects professionally.
I offer explanations and assistance in the following courses:
• Fluid Mechanics & Hydraulic/Pneumatic Control.
• Rigid Body Dynamics.
• Sensors and Data Acquisition Systems.
• Digital control machines and computer-aided design/manufacturing (CAD/CAM & CNC).
• Electric Machines & Drives.
• Renewable Energies.
In addition to theoretical explanations and worksheet solutions, I offer practical guidance in using engineering software (such as MATLAB and ANSYS) and assistance with graduation projects and course projects (CAD modeling and CFD simulations). My goal is to simplify engineering concepts and connect them to practical applications.