Translated by GoogleSee original

Analog and digital electronics: As a Doctor and Associate Professor in Electrical Engineering, I offer quality teaching.

From 29.72 $ /h

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School. I master the teaching of analog and digital electronics, covering components, integrated circuits and embedded systems.
- Fundamentals of electronics: Definitions, basic concepts, Kirchhoff's laws.
- Electronic components: Resistors, capacitors, inductors, diodes.
- Operational amplifiers: Operation, characteristics, applications.
- Basic analog circuits: Amplifiers, filters, oscillators.
- Introduction to digital electronics: Binary logic, logic gates, combinational circuits.
- Numbering systems: Conversion between bases, adders, subtractors.
- Transistors: Bipolar transistors, field effect transistors, characteristics, applications.
- Transistor amplifiers: Configuration, gain calculations, stability.
- Analog integrated circuits: Voltage regulators, A/D and D/A converters.
- Sequential digital systems: Flip-flops, registers, counters.
- Microcontrollers and microprocessors: Architecture, basic programming, interfaces.
- Analysis of electronic circuits: Frequency and time analysis methods.
- Advanced analog circuits: Differential amplifiers, power amplifiers, active filters.
- Modulation and demodulation techniques: AM, FM, PM.
- Embedded systems: Design of real-time systems, communication between peripherals.
- Test and measurement techniques: Oscilloscope, spectrum analyzer, signal generators.
-

Location

Online from France

About Me

I am a tenured professor and hold a doctorate in electrical engineering, and I have been teaching since 2014. Throughout my career, I have taught at various levels and in diverse programs within higher education institutions, including BTS (Advanced Vocational Training Certificate), CPGE (Preparatory Classes for the Grandes Écoles), faculties of science and technology, as well as in specialized training centers. This varied experience has allowed me to adapt to different teaching environments and contribute to the academic and professional development of students.

Education

Doctor of Electrical Engineering
Associate Professor of Engineering
Master's degree in Electrical Engineering
Bachelor's degree in electrical engineering
DEUST in Electrical Engineering
Baccalaureate in Physical Sciences

Experience / Qualifications

2024: Doctor of Electrical Engineering from the Faculty of Science and Technology
20214-2023: Associate Professor of Engineering in BTS classes

Age

Children (7-12 years old)

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

45 minutes

60 minutes

90 minutes

120 minutes

The class is taught in

English

French

Skills

Electronic circuits

Electrical engineering

Electrical circuits

Reviews

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Electronics, Electrotechnics, Automation and Industrial Computing

29.72 $ /h

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School in the following disciplines:

1. Electrical engineering
With extensive expertise in electrical systems, I am able to teach all aspects of electrical engineering, including electrical machines, energy conversion, and electrical networks. My teaching approach emphasizes theoretical understanding and practical applications.

2. Electronics
I am adept at teaching analog and digital electronics, covering components, integrated circuits, and embedded systems. I can impart solid knowledge to train students in current and emerging technologies.

3. Automatic
I offer comprehensive courses in dynamic systems control, whether using conventional (PID) or advanced (nonlinear, real-time) controls. My courses incorporate practical applications tailored to industrial needs.

4. Industrial Computing and Automation
With experience in programming and industrial automation, I can teach topics such as programmable logic controllers, embedded systems, industrial communication protocols, and HMIs. My goal is to equip students to design and optimize complex automated systems.

Automatic: Associate professor in electrical engineering and doctor in electrical engineering, I offer quality teaching in automatic

29.72 $ /h

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School on the control of dynamic systems, including:
- Systems theory: Linear and nonlinear systems, modeling.
- Open loop and closed loop systems.
- Regulation and control: Proportional, integral, derivative (PID).
- Frequency and time analysis: Frequency response, Bode diagrams, impulse response.
- Stability of systems: Routh-Hurwitz, Nyquist, and Bode criteria.
- Digital control systems: Discretization, digital regulators, Z transformation.
- Advanced regulation techniques: Adaptive, predictive, and robust control.
- Dynamic systems and simulations: Modeling by differential equations, simulation software
(MATLAB/Simulink).
- Identification of systems: Parametric and non-parametric methods.
- Nonlinear systems: Stability analysis, linearization, nonlinear regulators.

4.85

(13)

I offer teaching courses in electrical engineering and electronics (private lessons or holiday courses) to deal with the difficulties encountered by students during their schooling, as part of an individual follow-up that respects the rhythm specific to each.
These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Matías

4.85

(13)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Anh

4.85

(13)

In these tailored Engineering sessions, I combine tutoring with mentoring to guide your technical understanding and foster your growth in key engineering concepts. My approach adapts to your natural learning style, ensuring that each lesson is intuitive, engaging, and effective.

With over 10 years of experience in Aerospace, Mechanical, and Electrical engineering, I bring a wealth of both academic and real-world expertise to our sessions. I’ll share insights from the Aerospace, Maritime, and Aviation industries to help you develop practical skills and problem-solving techniques, tailored to your needs.

Whether you're studying:
• Aerospace Engineering
• Aeronautical Engineering
• Mechanical Engineering
• Electrical Engineering
• other types of Engineering

Or need help with areas like control systems or data analysis, I’m here to guide you through any engineering challenge. My lessons are customized to fit your learning style and academic goals, ensuring you leave each session feeling confident and prepared.

Contact me now for availability, and let's schedule your first session soon. I look forward to working with you!
__________________________________________________________________________________

I'm actively supporting students from top universities worldwide, including:

UK:
• Imperial College London (+ Business School) (ICL)
• University College London (UCL)
• King’s College London (KCL)

The Netherlands:
• Delft University of Technology (TUDelft)
• University of Amsterdam (UvA)
• University of Groningen (RUG)

Switzerland:
• ETH Zurich - Swiss Federal Institute of Technology

Australia:
• Queensland University of Technology (QUT)
• University of Queensland (UQ)
• Griffith University
__________________________________________________________________________________

My name is Anh, and I was born and raised in the U.K. With over 10 years of international experience tutoring Maths, Sciences, and Engineering from Middle School to University Level, I’ve supported over 80 students worldwide in unlocking their full potential.

I have a fun, ambitious, and outgoing personality, and I’m passionate about music, cooking, and trying new things. In my tutoring and mentoring, I am patient, adaptable, and committed to meeting the unique needs of each student.

I work as an Engineering Specialist/Consultant, holding:
• Master’s degree in Aeronautical Engineering from Imperial College London,
• AAA* A-Level in Further Maths and Physics,

Having been mentored and tutored myself, I understand the challenges students face. Through my own experiences of overcoming obstacles and achieving success, I’m passionate about helping others do the same. Let’s work together to ensure you reach your full potential, both academically and personally!

Marko

4.85

(13)

✅ Experienced teacher offering private online physics lessons for all levels.
✅ Fully dedicated and focused on student progress.
✅ Very patient, systematic, and organized.

I teach a wide range of topics in physics, including but not limited to:

5- Physical quantities and units
- Kinematics (types of motion, kinematics of point particles and rigid bodies)
- Dynamics (frictional and inertial forces, Newton's laws)
- Laws of conservation (energy, momentum)
- Theory of collision processes
- Inertial and non-inertial reference frames
- Potential and kinetic energy
- Gravitation and gravity fields
- Oscillatory and wave motions
- Harmonic oscillator
- Doppler effect
- Standing waves
- Sound waves and physical characteristics of sound
- Surface tension and capillary phenomena
- Fluid mechanics
- Temperature and heat
- Calorimetry
- Phase transitions
- Principles of thermodynamics
- Electrostatics
- Electromagnetism
- Kirchhoff's laws
- Electronic circuits
- Dielectrics
- Optics
... and much more.

If there are specific topics you would like to focus on or if you have any questions, feel free to let me know. I am here to help you deepen your understanding of physics.

Youssef

4.85

(13)

doctoral student in engineering sciences provides support courses in analog and digital electronics at any DEUG level and engineering schools. having scientific and technical knowledge, three years of experience in the field of teaching, pedagogy and a sense of listening and analysis, I am able to help pupils and students and train them in the chapters of which they are having difficulty. for more info please contact me

Ahmed

4.85

(13)

Learn from the ground up, starting with the fundamentals of electronics and various electronic components.
Understand the necessary electrical connections to design and program smart home and Internet of Things (IoT) circuits.
Explore what Arduino is and the programming language used to control it.
Discover how to create programs to control home devices using a mobile phone.

Training includes working with real Arduino circuits as well as using simulation software.
I offer practical and simplified training that starts from the fundamentals of electronics and progresses to designing and programming smart home and Internet of Things (IoT) systems. The course includes clear theoretical explanations and hands-on applications using real circuits and digital simulation software.

Course Content

Electronics Fundamentals

Introduction to essential electronic components: resistors, capacitors, diodes, transistors, and sensors

Understanding proper electrical connections

Reading electronic circuits and using the breadboard

What is Arduino and How Do We Program It?

Introduction to Arduino boards

Explanation of the C/C++ programming language used for Arduino

How to upload code and test projects step by step

Designing and Programming Smart Home Circuits

Connecting sensors and smart switches

Controlling lighting and household devices

Designing a system to control the home using a mobile phone

Introduction to IoT and integrating it with home automation

Mobile Phone Home Control

Creating simple control interfaces

Connecting using Wi-Fi or Bluetooth

Turning devices on and off and monitoring sensors remotely

Practical Training

Working with real Arduino circuits

Using simulation software such as Tinkercad and Proteus

Building ready-to-use practical projects

Who Is This Course For?

Beginners in electronics

Students interested in learning Arduino programming

Anyone who wants to build a smart home project

Anyone looking to understand how electronics work in a simple and practical way

Ali

4.85

(13)

My lessons are designed to build a strong technical foundation in Electrical and Electronic Engineering, with a clear focus on engineering theory, practical application, and problem-solving skills.

I teach a wide range of core Electrical & Electronic Engineering subjects, including analogue circuits, digital electronics, power systems, power electronics, renewable energy systems, control systems, engineering mathematics, and engineering physics. Each topic is explained using fundamental engineering principles, mathematical modelling, equations, and step-by-step derivations, ensuring students understand not only how solutions work, but why they work.

Lessons regularly involve circuit analysis, system modelling, signal analysis, and simulation-based learning using industry-standard engineering software such as MATLAB, Simulink, ORCAD, and PSpice. I also provide hands-on guidance in embedded systems and microcontroller programming, including Arduino programming, sensor interfacing, and basic real-time system design. Where relevant, I introduce engineering design workflows, helping students convert theoretical knowledge into practical, working engineering systems.

In addition to concept teaching, I support students with university assignments, coursework, lab reports, final-year projects, and exam preparation. This includes structured problem-solving techniques, past-paper practice, numerical analysis, debugging support, and exam strategy tailored to UK universities.

My goal is to help students develop strong engineering fundamentals, analytical thinking, and practical technical skills that are essential for academic success, professional engineering careers, and real-world applications.

Fatima

4.85

(13)

🚀 Do you finally want to understand electricity, electronics, or automation without stress? You've come to the right place!

👩‍🏫 I'm an electrical and renewable energy engineer and an experienced teacher. I'll guide you step by step, even if you're starting from scratch.

💡 My courses allow you to:
Understanding the basics of electricity

Master electronic circuits, control systems, and automatons

Learn at your own pace with concrete examples, diagrams, simulations and guided exercises

🧰 Content suitable for:
High school students / students in BTS, DUT, license, preparatory classes, engineering schools......

Students in retraining or self-taught

International students (courses available in French or English)

✅ What sets me apart:
Clear, progressive and caring approach

Support after the course if needed (questions, corrections, etc.)

Online or face-to-face courses

Abdallah

4.85

(13)

I offer online tutoring in High School Mathematics & Physics, University Electronics/Electronic Circuits, and Turkish language.
Lessons are structured, clear, and focused on understanding + practice, with personalized plans, step-by-step solutions, and regular feedback.

Ahmed

4.85

(13)

I am a dedicated Physics teacher with a strong passion for explaining scientific concepts in a clear, practical, and engaging way. I focus on building students’ conceptual understanding, problem-solving skills, and scientific thinking. My teaching approach combines theory with real-life applications, experiments, and visual explanations to make physics easy to understand and enjoyable for students at different academic levels.

Pritty

4.85

(13)

I offer structured and personalized courses in analog and digital electronics, covering everything from circuit fundamentals to integrated circuit (IC) design and system-level concepts. With a PhD in Electronics and academic as well as research experience, I help students build strong technical foundations while developing real-world engineering intuition. My teaching approach combines clear theory, practical examples, problem-solving techniques, and design-oriented thinking. Courses are suitable for undergraduate and master’s students, PhD candidates, and professionals, as well as motivated high-school students preparing for engineering studies. Whether your goal is exam preparation, project support, or gaining confidence in electronics design, I adapt the course content and pace to your needs with professionalism, clarity, and encouragement.

Taiwo

4.85

(13)

This online mathematics class helps students build a deep understanding of concepts, strengthen problem-solving skills, and improve performance in school and international exams. I have supported students across various educational systems, helping them overcome learning gaps and develop confidence in math.

Lessons focus on understanding why methods work, not just memorizing formulas. Students learn step-by-step approaches, logical reasoning, and how to clearly explain their solutions—an essential skill for higher-level mathematics.

I support learners studying under curricula such as Cambridge, IGCSE, GCSE, IB (MYP & DP), A-Level, and other international programs. Whether a student needs help catching up, preparing for exams, or aiming for higher achievement, lessons are tailored to their pace and goals.

With structured practice, guided problem-solving, and exam-focused strategies, students gain both clarity and confidence.

Jose

4.85

(13)

This class provides an introduction to the fundamental principles of electrical and electronic engineering with emphasis on control systems and their industrial applications. Topics include basic electrical circuits, electronic components, signal analysis, and the modeling and control of dynamic systems. Students will explore how electrical and electronic technologies are used to design, analyze, and regulate modern engineering systems, including automation, power systems, and industrial processes. The course integrates theoretical concepts with practical examples to develop analytical and problem-solving skills relevant to engineering practice.

Jean-François

4.85

(13)

A course for creators, artists, designers, and... anyone curious! Learn to manipulate and program Arduinos and other control boards, discover the sensor ecosystem, and implement motors, actuators, and lights. Start designing your own interactive systems!

Brayden

4.85

(13)

I offer a comprehensive, high-impact approach to mastering the laws of the universe.

My course is specifically designed to connect abstract formulas with a deep conceptual understanding. We will delve into:
- Classical Mechanics and Dynamics: We will master Newton's laws, kinematics and conservation of energy with competitive-level problem-solving techniques.
- Waves and Optics: We will understand the nature of oscillations, sound and light, from simple harmonic motion to the interference of complex waves.
- Thermodynamics: We will explore heat transfer, the laws of thermodynamics, and their crucial applications in engineering and aerospace.
- Electromagnetism: A rigorous approach to electric fields, circuits, magnetism, and Maxwell's equations.