Karlmarx
    Trusted teacher
    FavouritesAdd to Wish List
    FavouritesAdd to Wish List
    Trusted teacher
    from29.67USD/ h

    Programming and Hardware Designing of Microcontroller 8051

    Programming the 8051 Microcontroller.
    In this course you can be able understand the history and how a microcontroller is organized inside the internal structurer. The principle in the digital computing and the way of stored programmed concept. We will spend few hours on the basics of digital computing and will understand the hardware architecture of microcontroller 8051. The assembly language programming of 8051. The Programming on the 8051 resources along with the complier activity. We will learn to use the keil compilers and do the software simulation both in assembly and C. We will understand how to dump the hex file to the microcontroller. The detailed way of organizing and designing the memory map for 8051 will be studied with address map calculation. will design sample boards. Finally will design the 8051 based boards of Analog signal acquisition to microcontroller 8051 and delivering to a Digital to analog converter for Realtime signal functionality.

    Extra information

    Laptop with good internet

    Location

    Online via webcam

    General info

    Skills:
    Age:
    Children (7-12 years old)
    Teenagers (13-17 years old)
    Adults (18-64 years old)
    Seniors (65+ years old)
    Student level:
    Beginner
    Intermediate
    Advanced
    Duration:
    60 minutes
    The class is taught in:English

    About Me

    Many of the Micro-controller and Microprocessor teachers teaches the course more on the theory and book contents. The deviation in this learning part is the students are not knowing the internal bit level functioning inside the CPU and the tricks in the assembly level programming. In this place where i can able to clarify more to the students on the bit level function of different levels of processor domain classes. Interfacing sensor and actuators with controllers and memory interface area are the strong area of my teaching in which students can definitely understand and able to design any type of processor system. Memory mapping is an another area where distinct design making with more number of device will be demonstrated and make the students to practice with good design. I can help them in the processor assignments and tutorial solving. ARM processor theory can be introduced to students and simple program execution can be demonstrated. The theoretical knowledge of RTOS will be demonstrated in a more understandable way to the students. Generally I teach the subjects. I can't write exams for the students.
    Arduino is an another easier hardware in which we can interface many sensors and take the analog signals and do some processing the send the processed signal to the output actuator. Many sensors i have interfaced to Arduino and triggered many actuator. I ca n help students in making projects based on Arduino boards.

    Education

    Ph.D. (Instrumentation and Control Engineering)
    2011, National Institute of Technology, Tiruchirappalli
    M.E. (Electronics and Communication Engineering)
    2000, National Institute of Technical Teachers Training Institute, Chandigarh
    B.E. (Electronics and Communication Engineering)
    1988, Mohamed Sathak Engineering College, Keelakarai (Madurai Kamaraj University)

    Experience / Qualifications

    2020 to Till date Technology reviewer Cannytech Solutions, Texas , US
    2013-2020 Associate Professor Thiagarajar college of engineering, Madurai
    2010-2013 Assistant Professor Thiagarajar college of engineering, Madurai
    2006-2010 Senior Lecturer Thiagarajar college of engineering, Madurai
    2001-2006 Lecturer Thiagarajar college of engineering, Madurai
    1991-2001 Lecturer SLIET, Longowal, Punjab, Govt. of India
    Many of the Micro-controller and Microprocessor teachers teaches the course more on the theory and book contents. The deviation in this learning part is the students are not knowing the internal bit level functioning inside the CPU and the tricks in the assembly level programming. In this place where I can able to clarify more to the students on the bit level function of different levels of processor domain classes. Interfacing sensor and actuators with controllers and memory interface area are the strong area of my teaching in which students can definitely understand and able to design any type of processor system. Memory mapping is an another area where distinct design making with more number of device will be demonstrated and make the students to practice with good design. I can help learners in practicing the microprocessor assignments and tutorial solving. ARM processor theory can be introduced to students and simple program execution can be demonstrated. The theoretical knowledge of RTOS will be demonstrated in a more understandable way to the students. Generally I teach the subjects. I can't write exams for the students. Arduino is an another easier hardware in which we can interface many sensors and take the analog signals and do some processing and send the processed signal to the input of a actuator. Practically different sensors I have interfaced to Arduino and triggered many actuator. I can help students in making projects based on Arduino boards.

    Ask a question

    Send a message explaining your needs and Karlmarx will reply soon:
    The more detail, the better.
    Ex. "Hi, when are you available to meet for a lesson?"

    Availability of a typical week

    (GMT -04:00) New York
    MonTueWedThuFriSatSun
    0  Monday at 0:00  Tuesday at 0:00  Wednesday at 0:00  Thursday at 0:00  Friday at 0:00  Saturday at 0:00  
    1  Monday at 1:00  Tuesday at 1:00  Wednesday at 1:00  Thursday at 1:00  Friday at 1:00  Saturday at 1:00  
    2  Monday at 2:00  Tuesday at 2:00  Wednesday at 2:00  Thursday at 2:00  Friday at 2:00  Saturday at 2:00  
    3              
    4  Monday at 4:00  Tuesday at 4:00  Wednesday at 4:00  Thursday at 4:00  Friday at 4:00  Saturday at 4:00  
    5  Monday at 5:00  Tuesday at 5:00  Wednesday at 5:00  Thursday at 5:00  Friday at 5:00  Saturday at 5:00  
    6  Monday at 6:00  Tuesday at 6:00  Wednesday at 6:00  Thursday at 6:00  Friday at 6:00  Saturday at 6:00  
    7  Monday at 7:00  Tuesday at 7:00  Wednesday at 7:00  Thursday at 7:00  Friday at 7:00  Saturday at 7:00  
    8              
    9  Monday at 9:00  Tuesday at 9:00  Wednesday at 9:00  Thursday at 9:00  Friday at 9:00  Saturday at 9:00  
    10  Monday at 10:00  Tuesday at 10:00  Wednesday at 10:00  Thursday at 10:00  Friday at 10:00  Saturday at 10:00  
    11              
    12              
    13              
    14              
    15              
    16              
    17              
    18              
    19              
    20              
    21              
    22              
    23  Monday at 23:00  Tuesday at 23:00  Wednesday at 23:00  Thursday at 23:00  Friday at 23:00    Sunday at 23:00
    from $29.67Online via webcam

    Good-fit Instructor Guarantee


    If you are not satisfied after your first lesson, Apprentus will find you another instructor or will refund your first lesson.

    Online reputation

    • Instructor since November 2021
    • Phone number verified
    • Google connected

    Availability of a typical week

    (GMT -04:00) New York
    MonTueWedThuFriSatSun
    0  Monday at 0:00  Tuesday at 0:00  Wednesday at 0:00  Thursday at 0:00  Friday at 0:00  Saturday at 0:00  
    1  Monday at 1:00  Tuesday at 1:00  Wednesday at 1:00  Thursday at 1:00  Friday at 1:00  Saturday at 1:00  
    2  Monday at 2:00  Tuesday at 2:00  Wednesday at 2:00  Thursday at 2:00  Friday at 2:00  Saturday at 2:00  
    3              
    4  Monday at 4:00  Tuesday at 4:00  Wednesday at 4:00  Thursday at 4:00  Friday at 4:00  Saturday at 4:00  
    5  Monday at 5:00  Tuesday at 5:00  Wednesday at 5:00  Thursday at 5:00  Friday at 5:00  Saturday at 5:00  
    6  Monday at 6:00  Tuesday at 6:00  Wednesday at 6:00  Thursday at 6:00  Friday at 6:00  Saturday at 6:00  
    7  Monday at 7:00  Tuesday at 7:00  Wednesday at 7:00  Thursday at 7:00  Friday at 7:00  Saturday at 7:00  
    8              
    9  Monday at 9:00  Tuesday at 9:00  Wednesday at 9:00  Thursday at 9:00  Friday at 9:00  Saturday at 9:00  
    10  Monday at 10:00  Tuesday at 10:00  Wednesday at 10:00  Thursday at 10:00  Friday at 10:00  Saturday at 10:00  
    11              
    12              
    13              
    14              
    15              
    16              
    17              
    18              
    19              
    20              
    21              
    22              
    23  Monday at 23:00  Tuesday at 23:00  Wednesday at 23:00  Thursday at 23:00  Friday at 23:00    Sunday at 23:00
    from $29.67Online via webcam

    Good-fit Instructor Guarantee


    If you are not satisfied after your first lesson, Apprentus will find you another instructor or will refund your first lesson.

    Share

    You are here


    Matías
    Electronics, programming and robotics with ARDUINO and ESP32
    ARDUINO is a free hardware microcontroller. It is very useful for learning electronics and coding at the same time. It is very estimating thanks to that we can solve problems and look at the results physically. Thanks to the size of its community and the openness of its philosophy, information is widely accessible. Arduino allows us to undertake countless projects of all kinds. In a way, it's a small door through which you can easily access the world of makers. Among others. In the particular case of the arduino, my main goal is to stimulate creativity and curiosity. In addition to allowing my student to acquire a level of competence which allows him to function alone. I am used to working with people of different ages. I believe in segmentation, visualization of progress, objective results and practice. Beyond these general lines, there is no rule or magic method. Some things work with some students and not with others. Adapting to needs is really the goal of private lessons. So I will do my best to find what motivates and helps my student.

    Abdallah
    Learn Analog Electronics With an Engineer and Graduate Professor.
    By being an engineer who has experienced all the possibilities of stress that a student can encounter when understanding it, a teacher who has encumbered an experience for years, I have developed teaching and efficient methods in order to better explain to my students. For me, a student needs a logical explanation of things and a personalized follow-up in order to be able to better advance and develop their own skills. Distance courses: ----------------------------------- I can give distance lessons perfectly since I have a tablet on which I can work in the same way as if it were a notebook. The student can see everything I do live through screen sharing, and all they need is to use a computer. At the end of the course, I send him a copy of all the work done, which allows me to make sure that he has kept a clean record of the course spent together. Domains : -------------------------------------------------- ------------------ * Analog electronic: ------------------------------------------- - Semiconductor and PNP Junction - Diodes and transistors - Bipolar transistors and JFET (Static and dynamic analysis) - Operational amplifier in linear and non-linear mode - Frequency analysis (Bode, Nichols, Nyquist diagram ...) - Analog filtering - Analog Oscillator - Converters: CAN and CNA - Modulation - Differential amplifier - ... * Electrical engineering: -------------------------------- - Single-phase network - Three-phase network - Coil and magnetic circuit - Single-phase and three-phase transformers - Direct current machine (MCC) - Asynchronous Machine (MAS) - Synchronous Machine (MS) - Speed variators -.... * Power electronics: ---------------------------------------------- - Choppers - Rectifiers - Inverters - Dimmers - Speed variator -.... * Digital Electronics: ------------------------------------------- - Boolean algebra - Combinatorial systems - Sequential systems - Counters and decounters - Registers and memories - .... * Industrial Automation: ---------------------------------------- - Grafcet and GEMMA - State graph / state diagram - Programmable controllers (Siemens, Schnieder ...) - Programmable circuits (Microcontrollers, arduino ...) -.... * Linear automatic - Servo-control and regulation: -------------------------------------------------- ----------------------------------- - Laplace transformation - Transfer function - Functional diagrams - Dynamic performance of linear systems: Speed, Precision and Stability - The correctors: P, PI, PID, phase advance, phase delay, ... - Regulation and servoing - Digital servo -.... -------------------------------------------------- --------------- Additional Information Zoom or Google meet Whiteboard Anyway, I'll be there to help you move forward and love this area more. Are you ready to experience this learning adventure with me?

    Kaoutar
    programming course in Matlab and Simulink component
    Pour toute personne souhaitons apprendre le logiciel Matlab ou programmation matlab ou l'utilisation du composant SimuLink. This class is for anyone desiring to learn Matlab programming or specifically on using the Simulink component of Matlab.

    Monther
    Electrical and Electronics Engineering, Microcontroller Projects
    Teaching electrical and electronic engineering subjects through examples and practical explanations Examples of subjects that I can teach in Arabic and English: Microcontroller - Arduino - Embedded System - Electrical Machine - Power Electronics - Digital System Design - Digital Circuit - Programming in C And some other core subjects for electrical and electronic engineering major I am able to teach the Electrical and Electronics Engineering Subject with practical examples, some courses that I can teach: Microcontroller - Embedded System - Electrical Machine - Power Electronics - Digital System Design - Digital Circuit - Programming in C.

    Mohammed
    Calculus, Mathematics, Math, Circuit Theory, Electrical Circuits, Signal and Systems, Computer Programming
    Establishing students in the lessons of mathematics, electrical circuits and computer programming required for the undergraduate level through a highly experienced and qualified university professor. There are difficulties that students face in understanding these subjects because the student feels a gap between him and the teacher in addition to the lack of experience in teaching this type of material, and therefore I employ My high experience in this field to present the material in a smooth and consistent manner that ensures overcoming all the student’s problems in understanding the material in addition to ensuring success for the student and God is the guardian of success.

    Viswambher
    Electronic Power Conversion : Course which deals with converters, inverters and other power electronic components.
    EPC could be a nightmare for SET students at the TU Delft, especially those who do not have a background in Electrical Engineering. I am a second year SET student with an Electrical Engineering background. I scored a 9/10 on my first attempt and would be offering classes in TU Campus. In this class , we go through all the concepts taught in the class, have doubts sessions and exam preparation sessions. Even if you are an absolute beginner, there is nothing to worry since I would explain everything in as simple terms as simple terms as possible. Group lessons are also available.

    Ahmed
    Automatic Control and control systems - Automatic control and control systems
    A PhD student, who lived in USA for a couple of years and had all my last 7 years studies in English. I have finished my bachelor degree in electrical engineering between Ainshams university (top engineering school in egypt) ranked first and worked as Teacher assistant. Also I have studied power systems Engineering in University of Texas in Austin. I was a visiting researcher in MIT - Massechuesets institute of tecnology for energy systems. Currently I am simulation engineer in schneider electric for smart grids as part of my masters. and a PhD candidate in Energy storage systems. In french: A PhD student, who lived in the US for a few years and had all of my last 7 years of study in English. I finished my bachelor's degree in electrical engineering between Ainshams University (best engineering school in Egypt) ranked first and I worked as a teaching assistant. I also studied electrical systems engineering at the University of Texas at Austin. I was a visiting researcher at MIT - Massechusets institute of tecnology for energy systems. I am currently a simulation engineer at schneider electric for smart grids as part of my master's degree. and a doctoral student in energy storage systems.

    Mouna
    Electrical engineering and electrotechnical industrial engineering power electronics
    Doctor in electrical engineering I know exactly how difficult it is to write an article especially the first articles, even more in English. Admittedly, well-known newspapers, especially those indexed scopus, are very demanding, but don't worry, I'll give you the keys to a well-written article that will, above all, be published. The keys that allowed me to publish my articles in many journals indexės scopus (taylor and francis, ijpeds....)

    Muhammed
    Electrical Circuits I, Electrical Circuits II, Digital Logic Design I, Matlab, Calculus I, Integration I, Arduino,
    Teaching assistant at the Department of Electrical Engineering, Faculty of Engineering, Cairo University, and a former teacher at Notatee Kuwait, with two years of university teaching experience I can help you in explaining and solving problems related to electrical engineering branches (electrical machines - energy conversion - renewable energy - electronic circuits - electrical circuits - high voltage - electrical protection - electrical forces - automatic control - MATLAB - ETAP - Arduino)

    Ayoub
    Electrical Engineering Courses for Students :: Beginner and Advanced Levels
    Electrical Engineer with more than 6 years of experience, offers personalized training support for future graduates, technicians and engineers: Module expertise: - LV/MV Distribution System - Electrical Network Engineering - Electrical engineering - Analog and digital electronics - Power electronics & VFD Applications, - Digital Transmission, - Software Training: Caneco BT, Etap V12.6, ISIS Proteus, Dialux, Rapsody .... As well, the supervision of students during the end-of-study internships You're welcome

    Denna
    Electrical engineering, new and renewable energy engineering, mathematics, physics, mechanics
    The word engineering in general is the use of scientific principles proven by scientific theories such as the principles and theories that I have studied over the years in physics, chemistry, mathematics and other sciences, and these proven scientific principles we generally use in finding innovative scientific solutions to solve human problems. Mathematics is a body of abstract knowledge resulting from logical deductions such as sets, numbers, shapes, structures, and transformations. Mathematics is also concerned with the study of topics such as quantity, structure, space, and change. Physics, also called naturalism or naturism, is the science that studies basic concepts such as energy, force, time, and everything that stems from this, such as mass, matter and its motion. On a larger scale, it is the general analysis of nature, which aims to understand how the universe works. . Mechanics, mechanics, or the science of kinetic and static forces, is the field of physics concerned with the motions of macroscopic bodies. Forces applied to objects cause displacement, or changes in the position of an object in relation to its position. The origin of this branch of physics in ancient Greece goes back to the writings of Aristotle and Archimedes. During the early modern period, scientists such as Galileo, Kepler, and Newton laid the foundation for what is now known as classical mechanics. It is the branch of classical physics that deals with particles that are at rest or are moving at speeds well below the speed of light. It can also be defined as a branch of science that deals with motion and forces on bodies that are not in the quantum world.

    Arianit
    Electrical Engineering I (Beginner basics for students who started a degree in Engineering)
    Being at the end of my studies I am offering Electrical Engineering I tutorials for beginner students that need a bit of more information on the following topics: •Electrical Engineering Basics •Passive components •Circuit Analysis (Thevenin, Kirchoff and Helmholtz approaches) •Three-phase systems

    Davide
    Electrical engineering at all levels, even engineering students
    Professor HES, with doctorate in electricity from EPFL, with long experience in teaching, makes himself available for courses in support of science related to electricity. Possibility of correctly understanding the issues related to electrical networks.

    Refilwe
    Electrical Engineering, Electronics, Digital systems, Mathematics, Algebra,
    Electrical Engineering is a powerful course and the benefits of it are extremely important in making life easier for us. I offer interaction, tutoring and prep tests for candidates who require the assistance. The classes will be via webcam and the tutoring lessons are fun, entertaining, engaging and beneficial. I hope to see you there.

    Carlos
    Electricidad, te ayudo con tus tareas, exámenes, trabajos todo para que aprendas y apruebes
    Estudiante de 3er año de ingeniería eléctrica de la USB Preparador del departamento de matemáticas puras y aplicadas y del departamento de conversión y transporte de energía Estoy dispuesto a ayudarte para que aprendas y logres aprobar. Cómo preparador puedo armar un material teórico-practico con diferentes ejercicios para así explicarme mejor, esto tiene como objetivo un mayor aprendizaje para el alumno.