Translated by GoogleSee original

engineering sciences, electrical circuit, electrical engineering, programming, electronics, automation, physics

From 27 € /h

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Location

Use Ctrl + wheel to zoom!

At student's location :

Around Paris, France

Around Brussels, Belgium

Around Montreal, 10, Canada

Online from Belgium

About Me

Doctor of Engineering Sciences and Electrical Engineering
Professor of Engineering Sciences and Electrical Engineering

• Electronics: Knowledge of analog, digital, and power electronics, as well as biomedical systems and instrumentation.
• Signal processing: Analysis, filtering and processing of signals.
• Power electronics: Control of inverters and rectifiers.
• Automation: Continuous and discrete systems, modeling, identification and control of automated systems.
• Mechatronics: Integration of mechanical, electronic and computer systems.
• Renewable energies: Study of solar pumping installations and wind power systems.
• Electrotechnics: Study of electric motors and transformers.
• Networks and telecommunications: Design and management of communication networks.
• Industrial computing: Knowledge of microprocessors (ARM, Intel) and programmable logic controllers (PLCs).
• Noise and vibration of asynchronous motors: Analysis of the vibrational and acoustic behavior of motors.
• Speed controller: Control of motor speed via speed controllers.

• Software used: MATLAB, Proteus.

Education

Doctor of Engineering Sciences and Electrical Engineering
professor of industrial engineering sciences and electrical engineering
Master of Science and Technology in Electrical Engineering
Degree in Electronics and Industrial Computing
Professional license: education teaching professions science and technology sector

Experience / Qualifications

15 years of experience as a professor of engineering sciences, certified in teaching professions in the science and technology sector. Trainer of engineers and freelancer for projects in the electrical field.

Age

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

The class is taught in

French

English

Skills

Mechanical engineering

Engineering

Electronic circuits

Reviews

Availability of a typical week

(GMT -05:00)

New York

Online via webcam

At student's home

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Automation Signal Processing MATLAB Electronics VHDL Programming

26 € /h

..................................... (satisfied or refunded)........ .......
Electrical engineering expert
PhD student in electrical engineering and renewable energies
engineer in electrical engineering and industrial computing
I offer home schooling courses to deal with the difficulties encountered by students during their schooling,
These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.
===Automatic (Servo-control and automatism regulation (discrete, continuous)========
===Electrical engineering (electrical machines) and power electronics (inverter rectifier)=======
===Continuous and sampled signal processing=================
===VHDL programming, microcontroller and microprocessor (intel, ARM)============
===High frequency electronics (transistor, diode, AOP, noise)============
===Propagation of electromagnetic waves and antennas========
===Analog and digital electronics (filters, flip-flops, sysml,Grafcet,amplifier)=====
=== Realization of electrical projects
===MATLAB ARDUINO Proteus ISIS
=== Renewable energies

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This pedagogical approach is effective since it has often led me to interesting results with my students.

Support courses in engineering sciences, electronics, automation, programming

27 € /h

Associate professor in engineering sciences, 5 years of professional experience at all levels, college, high school, university, preparatory classes, engineering schools. Gives courses from college to university, preparation for exams, revisions, oral preparation, development of study methodologies.

Webcam lessons

Sam

4.5

(14)

Professor in mathematics, computer science at HEFF in Brussels and before a professor of electronics at IEPSCF, NGÉNIEUR in electronics ECAMIEN of basic diploma in mathematics-physics and I propose an individualized pedagogy, an aid to the preparation of the interrogations or exams. My goal is to advance the student without overloading him. I give homework after each lesson and periodically provide progress reports
I strongly encourage the student because the state of mind and morale have a direct influence on school results.
I am someone understandable and I always try to take each one in his own way.
I always start by clarifying the course after giving an example then give an example to the student to do a full exercise and finally correct a review together generally it's methodology but it can change from one case to another.

4.5

(14)

Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer support courses in the subjects of engineering sciences (Electronics, automatics, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism (propagation of high frequency waves)
Automatic (continuous, sampled)
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python,VHDL
PIC Microprocessor and Microcontroller
Signal processing and data acquisition
Engineering Sciences

These courses allow the student to get up to speed and regain confidence in all scientific subjects, just as they prepare him effectively for the Baccalaureate, the Preparatory Classes or various examinations of the engineering classes.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Marko

4.5

(14)

✅ Experienced teacher offering private online physics lessons for all levels.
✅ Fully dedicated and focused on student progress.
✅ Very patient, systematic, and organized.

I teach a wide range of topics in physics, including but not limited to:

5- Physical quantities and units
- Kinematics (types of motion, kinematics of point particles and rigid bodies)
- Dynamics (frictional and inertial forces, Newton's laws)
- Laws of conservation (energy, momentum)
- Theory of collision processes
- Inertial and non-inertial reference frames
- Potential and kinetic energy
- Gravitation and gravity fields
- Oscillatory and wave motions
- Harmonic oscillator
- Doppler effect
- Standing waves
- Sound waves and physical characteristics of sound
- Surface tension and capillary phenomena
- Fluid mechanics
- Temperature and heat
- Calorimetry
- Phase transitions
- Principles of thermodynamics
- Electrostatics
- Electromagnetism
- Kirchhoff's laws
- Electronic circuits
- Dielectrics
- Optics
... and much more.

If there are specific topics you would like to focus on or if you have any questions, feel free to let me know. I am here to help you deepen your understanding of physics.

Mohssine

4.5

(14)

Doctoral researcher, associate professor and state engineer with extensive experience in academic support. I offer private lessons in electrical engineering (see the fields below) adapted to the profile of each student whatever their difficulties.
---------------------------------------------------------- ---------------------------------------------------------- --------------
Working method:
--------------------------------
I have an effective method applied as follows:
- Course review and writing of a summary sheet including all the important elements, formulas, tips which will allow the student to revise quickly.
- Typical and application exercises, in-depth exercises, summary exercises.
- Best preparation method for tests, assessments, exams and competitions.
---------------------------------------------------------- ---------------------------------------------------------- --------------
Distance learning courses:
-----------------------------------
I can give distance lessons perfectly since I have a tablet on which I can work in the same way as if it were a notebook. The student can see everything I do live through screen sharing, and all they need is to use a computer. At the end of the course, I send him a copy of all the work done, which allows me to make sure that he has kept a clean record of the course spent together.
-----------------------------------------------------------------------------------------------------------------

The areas:
-------------------------------------------------- ------------------
* Electrostatics and Electromagnetism
-------------------------------------------------- ------------------
* Electrical engineering:

- Single-phase distribution systems
- Three-phase distribution systems
- Transformers
- The direct current machine
- The asynchronous machine
- The synchronous machine and the alternators
- Speed variators
- Energy sources
- Energy storage
-....
-------------------------------------------------- --------------
* Power electronics:

- Choppers
- Rectifiers
- Inverters
- Dimmers
-....
-------------------------------------------------- -------------
* Electronics:

- Sensors: logic, analog and digital
- Operational amplifiers
- Analog and digital filters
- Converters: CAN and CNA
- Digital circuits: combinational logic and sequential logic
- Semiconductors: diodes, bipolar transistors, etc.
- Analog modulation and digital modulation (ASK, FSK, PSK, QAM)
-....
--------------------------------------------------------------
*Automation:

- Grafcet and GEMMA
- State graph / state diagram
- Programmable automatons
- Programmable circuits (Microcontrollers, arduino ...)
-....
-------------------------------------------------- -------------
*Servo and regulation:

- Laplace transform
- Transfer function
- Functional diagrams
- Dynamic performance of linear systems: Speed, Precision and Stability
- The correctors: P, PI, PID, phase advance, phase delay, ...
- Regulation and servoing
- Digital servo
-....

Charles

4.5

(14)

I offer you a concrete and direct teaching. I never go through four hundred thousand paths.
With me, the courses are clear, sharp and precise and above all without any headaches.
I like to study in a good mood so that I can transmit to students the same passion I have for the subjects I teach.

Youness

4.5

(14)

I am an associate professor of electrical engineering, I offer courses in everything related to the electrical engineering discipline:
CPGE / BTS / DUT / IUT / DTS / UNIVERSITY / Technical high school
ELECTRIC MACHINE
SYNCHRONOUS MACHINE
ASYNCHRONOUS MACHINE
DIRECT CURRENT MACHINE
STEP-BY-STEP ENGINE

POWER ELECTRONICS
INVERTERS AND MULTI-LEVEL INVERTERS
CONTROLS: MLI / OFFSET / SYSMETRIC / 120° and 180°
RECTIFIER
CHOPPER
DIMERS

NONLINEAR CONTROLS
BACKSTEPPING
SLIDING MODE

Abdeer

4.5

(14)

Doctor and graduate in mechanical engineering, I give private lessons at the following level:
* Kinematic Model Course (direct or inverse)
* Dynamic Model Course (direct or reverse)
* Static Model Course (direct or inverse)
* Course Planning the trajectory
* Robot Control Course
* Programming course on Matlab or RoboStudio.

Francisco

4.5

(14)

With 7+ years' experience in education, I have coached over 50 students to improve their academic results and boost their confidence in math and physics.

My tutoring services always include a personalized plan for each student. This plan is established during the first session where I like to meet the student, better understand their difficulties and get to know their schedule.

In the first session, we will:

- Get to know each other.
- Understand the student's strengths and identify areas for improvement.
- Understand the student's needs and difficulties.
- Get to know the student's schedule.
- Create a tutoring plan

Typically, sessions take place as follows:
i. Theoretical review of complex concepts in simple terms
ii. Tips for solving problems
iii. Abundance of exercises from my databases (exams, exercises)

If you are interested in my services, please provide the following information when contacting me:

- School system (French Bac, Matu, IB, A-levels)
- Location of tutoring (or video tutoring if applicable)
- Number of sessions per week and preferred days and times of the week (this can also be discussed after the first session, if you prefer)

Check out my profile if you want to know more about me :)

See you soon,
Francisco

Ayoub

4.5

(14)

This preparation session is dedicated to students aiming for preparatory classes for scientific Grandes Ecoles (CPGE), with a particular focus on the subjects of Physics and Engineering Sciences. The goal is to strengthen the foundations and deepen the knowledge to succeed.

1. Mechanics:
Kinematics: Study of rectilinear and circular movements, position vectors, speed and acceleration.
Dynamics: Newton's laws, work and energy, kinetic energy theorem.

2. Electromagnetism / Electrokinetics:
Electrostatics: Electric charges and fields, electric potential, capacitance.
Magnetostatics: Magnetic fields, Lorentz forces, electromagnetic induction.
Alternating Currents: RLC circuits, resonance, impedance.

3. Thermodynamics:
Principles of thermodynamics: Internal energy, heat, work, first and second principles.
Ideal and real gases: Equations of state, thermodynamic transformations.

4. Industrial sciences:
Automatic Linear, Kinematic, Static.

For more information and to register for the preparation session, please contact me.

Good preparation and success in your studies!

.

Luke

4.5

(14)

Looking for a Mathematics, Physics, or Engineering Tutor?

I offer expert tutoring for high school and university students in the Ile-de-France region, with a passion for foundational Physics and Mathematics, and in sharing my knowledge with others. I have a strong background in mathematics, physics, and engineering, I am here to help you succeed in your academic journey!

Services Offered:
Personalized tutoring sessions in Mathematics, Physics, and Engineering.
Tailored support for exam preparation, homework help, and understanding complex concepts.
Flexible scheduling to accommodate your needs.

Why Choose Me?
I have a very strong background in these subjects, having completed my undergraduate studies in Physics and Aerospace Engineering, and I am now beginning my post graduate studies.
Patient, engaging, and committed to helping students achieve their best results.
I am an experienced Tutor, having tutored mathematics and Physics previously, helping students to achieve goals that we set together
Get in touch today to boost your academic performance and build confidence in these critical subjects!

Ossama

4.5

(14)

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School in the following disciplines:

1. Electrical engineering
With extensive expertise in electrical systems, I am able to teach all aspects of electrical engineering, including electrical machines, energy conversion, and electrical networks. My teaching approach emphasizes theoretical understanding and practical applications.

2. Electronics
I am adept at teaching analog and digital electronics, covering components, integrated circuits, and embedded systems. I can impart solid knowledge to train students in current and emerging technologies.

3. Automatic
I offer comprehensive courses in dynamic systems control, whether using conventional (PID) or advanced (nonlinear, real-time) controls. My courses incorporate practical applications tailored to industrial needs.

4. Industrial Computing and Automation
With experience in programming and industrial automation, I can teach topics such as programmable logic controllers, embedded systems, industrial communication protocols, and HMIs. My goal is to equip students to design and optimize complex automated systems.

Yassmine

4.5

(14)

As a mechanical engineer, I offer tutoring in mathematics, physics and mechanical engineering, adapting each session to the specific needs of the student. My goal is to make these subjects clear and accessible while promoting understanding and practical application of concepts.

Dounya

4.5

(14)

As an electronics engineer specializing in radio frequencies (RF), microwaves, and printed circuit board (PCB) design, I offer personalized courses to help you master advanced electronic technologies. My expertise covers a wide range of skills, including:

- Design of RF and analog circuits.
- Design of multilayer PCBs integrating complex functionalities (microstrip, stripline, etc.).
- Simulation and optimization with tools like Altium Designer, KiCad, LTspice, CST Studio, and ADS (Advanced Design System).
- Electromagnetic compatibility (EMC) and compliance testing.
- Design of IoT (Internet of Things) systems and integration of wireless modules (Wi-Fi, Bluetooth, LoRa, ZigBee).
- Signal analysis and digital processing (FFT, digital filtering).

With a strong background in R&D, I combine theory and practical applications to teach complex concepts such as:

- RF amplifiers and active/passive filters.
- Switching power supplies (SMPS) and linear regulators.
- Microcontrollers and embedded systems (STM32, Arduino, ESP32).
- Electronic manufacturing: creation of Gerber files, production monitoring, assembly and testing.

I have already successfully supported more than 50 students, helping them master key concepts such as computer-aided design (EDA), circuit debugging, and functional prototypes.

Recognized for my teaching skills, my patience, and my ability to make electronics intuitive, I adapt to the needs of each student, whether it is to succeed in an academic project, launch a prototype, or perfect professional skills.

Methodology

My courses are suitable for all levels, with a progressive and personalized approach:

1) Theoretical bases: exploration of fundamental principles (Kirchhoff’s laws, Thévenin and Norton’s theorems, circuit analysis).
2) Concrete applications: simulation of electronic circuits, design of multilayer PCBs, optimization for RF performances, and manufacturing of prototypes.
3) Practical projects: realization of complete systems, from idea to design, integrating microcontrollers, RF modules, and laboratory tests.

I rely on professional tools and offer additional resources:

1) Interactive simulations (CST Studio, LTspice).
2) Guides on electronic manufacturing (creating Gerber files, assembly).
3) Technical support for advanced tools: ADS, HFSS, MATLAB, Python.

Contact

Feel free to contact me to learn more or book a session. Together, we will explore advanced electronic technologies, and I will help you achieve your academic, professional, or personal goals.

Lara

4.5

(14)

This course is taught by a PhD engineer specializing in electrical and dynamic systems. It is intended for anyone wishing to acquire a solid and versatile foundation in the fundamental disciplines of engineering science. You will explore essential concepts in applied mathematics, physics, electricity, and electronics, while developing concrete programming skills (MATLAB/Simulink).
The teaching approach combines scientific rigor with practical applications: algorithm synthesis, differential equation solving, circuit simulation, and mathematics. The goal is to make you autonomous in solving technical problems while cultivating a deep understanding of theoretical and numerical tools.

Anas

4.5

(14)

This course is aimed at students wishing to strengthen their skills in mathematics, computer science and engineering sciences, three complementary disciplines for developing logic, rigor and analytical skills.

The objective is to support each student according to their level and needs:

🔹 In mathematics: understand concepts, solve various exercises and prepare effectively for exams.

🔹 In IT: learn programming (Python, Scratch, C++...), algorithmic logic and the use of digital tools.

🔹 In engineering sciences: discover the principles of modeling, mechanics, and electronics.

Each session is structured to make the student independent, confident and motivated, thanks to clear teaching methods adapted to their pace.