Translated by GoogleSee original

Analog and digital electronics: As a Doctor and Associate Professor in Electrical Engineering, I offer quality teaching.

From 25 € /h

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School. I master the teaching of analog and digital electronics, covering components, integrated circuits and embedded systems.
- Fundamentals of electronics: Definitions, basic concepts, Kirchhoff's laws.
- Electronic components: Resistors, capacitors, inductors, diodes.
- Operational amplifiers: Operation, characteristics, applications.
- Basic analog circuits: Amplifiers, filters, oscillators.
- Introduction to digital electronics: Binary logic, logic gates, combinational circuits.
- Numbering systems: Conversion between bases, adders, subtractors.
- Transistors: Bipolar transistors, field effect transistors, characteristics, applications.
- Transistor amplifiers: Configuration, gain calculations, stability.
- Analog integrated circuits: Voltage regulators, A/D and D/A converters.
- Sequential digital systems: Flip-flops, registers, counters.
- Microcontrollers and microprocessors: Architecture, basic programming, interfaces.
- Analysis of electronic circuits: Frequency and time analysis methods.
- Advanced analog circuits: Differential amplifiers, power amplifiers, active filters.
- Modulation and demodulation techniques: AM, FM, PM.
- Embedded systems: Design of real-time systems, communication between peripherals.
- Test and measurement techniques: Oscilloscope, spectrum analyzer, signal generators.
-

Location

Online from France

About Me

Je suis professeur agrégé et docteur en génie électrique, exerçant dans l'enseignement depuis 2014. Au cours de ma carrière, j'ai enseigné à différents niveaux et dans diverses filières au sein d'établissements d'enseignement supérieur, notamment les BTS, les CPGE, les facultés des sciences et techniques, ainsi que dans des centres de formation spécialisés. Cette expérience variée m'a permis de m'adapter à différents environnements pédagogiques et de contribuer au développement académique et professionnel des étudiants.

Education

Docteur en génie électrique
Professeur Agrégé en génie
Master en génie Electrique
Licence en génie électrique
DEUST en génie électrique
Baccalauréat sciences physique

Experience / Qualifications

2024: Docteur en génie électrique au Faculté des Sciences et Techniques
20214-2023 : Professeur Agrégé en génie au classes de BTS

Age

Children (7-12 years old)

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

45 minutes

60 minutes

90 minutes

120 minutes

The class is taught in

English

French

Skills

Electronic circuits

Electrical engineering

Electrical circuits

Reviews

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Electronics, Electrotechnics, Automation and Industrial Computing

25 € /h

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School in the following disciplines:

1. Electrical engineering
With extensive expertise in electrical systems, I am able to teach all aspects of electrical engineering, including electrical machines, energy conversion, and electrical networks. My teaching approach emphasizes theoretical understanding and practical applications.

2. Electronics
I am adept at teaching analog and digital electronics, covering components, integrated circuits, and embedded systems. I can impart solid knowledge to train students in current and emerging technologies.

3. Automatic
I offer comprehensive courses in dynamic systems control, whether using conventional (PID) or advanced (nonlinear, real-time) controls. My courses incorporate practical applications tailored to industrial needs.

4. Industrial Computing and Automation
With experience in programming and industrial automation, I can teach topics such as programmable logic controllers, embedded systems, industrial communication protocols, and HMIs. My goal is to equip students to design and optimize complex automated systems.

Automatic: Associate professor in electrical engineering and doctor in electrical engineering, I offer quality teaching in automatic

25 € /h

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School on the control of dynamic systems, including:
- Systems theory: Linear and nonlinear systems, modeling.
- Open loop and closed loop systems.
- Regulation and control: Proportional, integral, derivative (PID).
- Frequency and time analysis: Frequency response, Bode diagrams, impulse response.
- Stability of systems: Routh-Hurwitz, Nyquist, and Bode criteria.
- Digital control systems: Discretization, digital regulators, Z transformation.
- Advanced regulation techniques: Adaptive, predictive, and robust control.
- Dynamic systems and simulations: Modeling by differential equations, simulation software
(MATLAB/Simulink).
- Identification of systems: Parametric and non-parametric methods.
- Nonlinear systems: Stability analysis, linearization, nonlinear regulators.

4.85

(13)

Engineer and senior professor of engineering sciences provides support courses in analog and digital electronics at all levels, engineering schools. having a scientific and technical knowledge, five years of experience in the field of teaching, teaching and a sense of listening and analysis, I am able to help pupils and students and train them in the chapters of which they have difficulties. for more info please contact me

Matías

4.85

(13)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Nassim

4.85

(13)

Detailed explanation of basic electronics courses starting from basic elements to the most complicated structures, solid course with detailed explanation

All electronic components

Basic logic circuits
integrated circuits

Marko

4.85

(13)

✅ Experienced teacher offering private online physics lessons for all levels.
✅ Fully dedicated and focused on student progress.
✅ Very patient, systematic, and organized.

I teach a wide range of topics in physics, including but not limited to:

5- Physical quantities and units
- Kinematics (types of motion, kinematics of point particles and rigid bodies)
- Dynamics (frictional and inertial forces, Newton's laws)
- Laws of conservation (energy, momentum)
- Theory of collision processes
- Inertial and non-inertial reference frames
- Potential and kinetic energy
- Gravitation and gravity fields
- Oscillatory and wave motions
- Harmonic oscillator
- Doppler effect
- Standing waves
- Sound waves and physical characteristics of sound
- Surface tension and capillary phenomena
- Fluid mechanics
- Temperature and heat
- Calorimetry
- Phase transitions
- Principles of thermodynamics
- Electrostatics
- Electromagnetism
- Kirchhoff's laws
- Electronic circuits
- Dielectrics
- Optics
... and much more.

If there are specific topics you would like to focus on or if you have any questions, feel free to let me know. I am here to help you deepen your understanding of physics.

Youssef

4.85

(13)

doctoral student in engineering sciences provides support courses in analog and digital electronics at any DEUG level and engineering schools. having scientific and technical knowledge, three years of experience in the field of teaching, pedagogy and a sense of listening and analysis, I am able to help pupils and students and train them in the chapters of which they are having difficulty. for more info please contact me

Anh

4.85

(13)

If you're facing resit exams in engineering and want to make sure you succeed, I’m here to support you. These tailored tutoring sessions are designed specifically to help you overcome challenges, address any gaps in understanding, and reinforce the core principles of your engineering subjects. Together, we’ll revisit key concepts and solidify your foundation so you feel confident tackling future challenges.

Whether you're studying:
• Aerospace Engineering
• Aeronautical Engineering
• Mechanical Engineering
• Electrical Engineering
• other types of Engineering

You’ll build the knowledge and confidence needed to excel in your resit exams and beyond.

Contact me now for availability, and let's schedule your first session soon. I look forward to working with you!
__________________________________________________________________________________

I'm actively supporting students from top universities worldwide, including:

UK:
• Imperial College London (+ Business School) (ICL)
• University College London (UCL)
• King’s College London (KCL)

The Netherlands:
• Delft University of Technology (TUDelft)
• University of Amsterdam (UvA)
• University of Groningen (RUG)

Switzerland:
• ETH Zurich - Swiss Federal Institute of Technology

Australia:
• Queensland University of Technology (QUT)
• University of Queensland (UQ)
• Griffith University
__________________________________________________________________________________

My name is Anh, and I was born and raised in the U.K. With over 10 years of international experience tutoring Maths, Sciences, and Engineering from Middle School to University Level, I’ve supported over 80 students worldwide in unlocking their full potential.

I have a fun, ambitious, and outgoing personality, and I’m passionate about music, cooking, and trying new things. In my tutoring and mentoring, I am patient, adaptable, and committed to meeting the unique needs of each student.

I work as an Engineering Specialist/Consultant, holding:
• Master’s degree in Aeronautical Engineering from Imperial College London,
• AAA* A-Level in Further Maths and Physics,

Having been mentored and tutored myself, I understand the challenges students face. Through my own experiences of overcoming obstacles and achieving success, I’m passionate about helping others do the same. Let’s work together to ensure you reach your full potential, both academically and personally!

Ali

4.85

(13)

My lessons are designed to build a strong technical foundation in Electrical and Electronic Engineering, with a clear focus on engineering theory, practical application, and problem-solving skills.

I teach a wide range of core Electrical & Electronic Engineering subjects, including analogue circuits, digital electronics, power systems, power electronics, renewable energy systems, control systems, engineering mathematics, and engineering physics. Each topic is explained using fundamental engineering principles, mathematical modelling, equations, and step-by-step derivations, ensuring students understand not only how solutions work, but why they work.

Lessons regularly involve circuit analysis, system modelling, signal analysis, and simulation-based learning using industry-standard engineering software such as MATLAB, Simulink, ORCAD, and PSpice. I also provide hands-on guidance in embedded systems and microcontroller programming, including Arduino programming, sensor interfacing, and basic real-time system design. Where relevant, I introduce engineering design workflows, helping students convert theoretical knowledge into practical, working engineering systems.

In addition to concept teaching, I support students with university assignments, coursework, lab reports, final-year projects, and exam preparation. This includes structured problem-solving techniques, past-paper practice, numerical analysis, debugging support, and exam strategy tailored to UK universities.

My goal is to help students develop strong engineering fundamentals, analytical thinking, and practical technical skills that are essential for academic success, professional engineering careers, and real-world applications.

Ahmed

4.85

(13)

Fundamentals of electronics engineering, Arduino programming, and smart home circuits

I offer practical and simplified training that starts from the basics of electronics and goes up to the design and programming of smart home and Internet of Things systems, with theoretical explanations and practical applications on real circuits and digital simulations.

Course content:
1. Fundamentals of Electronics

Identifying different electronic components: resistors, capacitors, diodes, transistors, and sensors.

Understanding correct electrical connections

Reading electronic circuits and working with breadboards

2. What is Arduino? And how do we program it?

Introduction to Arduino boards

Explanation of the C++ programming language used with Arduino

How to download code and test projects step by step

3. Design and programming of smart home circuits

Connecting sensors and smart switches

Lighting and electrical appliance control

Designing a system that controls the home using a mobile phone

Introduction to the Internet of Things (IoT) and its connection to home control

4. Controlling the home from a mobile phone

Creating simple control interfaces

Connect using Wi-Fi or Bluetooth

Remote device operation and sensor monitoring

5. Practical training

Real Arduino circuit experiment

Using simulation software such as Tinkercad and Proteus

Practical projects ready for implementation

Who is this course for?

Beginners in the field of electronics

Students interested in Arduino programming

Who wants to create a smart home project?

Anyone who wants to understand how electronics work in a simple and practical way

Fatima

4.85

(13)

🚀 Do you finally want to understand electricity, electronics, or automation without stress? You've come to the right place!

👩‍🏫 I'm an electrical and renewable energy engineer and an experienced teacher. I'll guide you step by step, even if you're starting from scratch.

💡 My courses allow you to:
Understanding the basics of electricity

Master electronic circuits, control systems, and automatons

Learn at your own pace with concrete examples, diagrams, simulations and guided exercises

🧰 Content suitable for:
High school students / students in BTS, DUT, license, preparatory classes, engineering schools......

Students in retraining or self-taught

International students (courses available in French or English)

✅ What sets me apart:
Clear, progressive and caring approach

Support after the course if needed (questions, corrections, etc.)

Online or face-to-face courses

Maciek

4.85

(13)

Hi, I’m Maciek

I am a graduate of an Electronics Technical High School and currently an Electrical Engineering student. I know exactly how overwhelming circuits and formulas can feel because I’ve been there.

My teaching philosophy is simple: I believe anyone can master this subject—it’s just a matter of time and the right explanation. I don’t believe in "bad students," only rushed explanations.

In our lessons, we work stress-free using a virtual whiteboard, so you can see every step clearly. I provide my own custom notes and visual aids to help you understand, not just memorize. Let's tackle this together, at your own pace!

Abdallah

4.85

(13)

I offer online tutoring in High School Mathematics & Physics, University Electronics/Electronic Circuits, and Turkish language.
Lessons are structured, clear, and focused on understanding + practice, with personalized plans, step-by-step solutions, and regular feedback.

Ahmed

4.85

(13)

I am a dedicated Physics teacher with a strong passion for explaining scientific concepts in a clear, practical, and engaging way. I focus on building students’ conceptual understanding, problem-solving skills, and scientific thinking. My teaching approach combines theory with real-life applications, experiments, and visual explanations to make physics easy to understand and enjoyable for students at different academic levels.

Pritty

4.85

(13)

I offer structured and personalized courses in analog and digital electronics, covering everything from circuit fundamentals to integrated circuit (IC) design and system-level concepts. With a PhD in Electronics and academic as well as research experience, I help students build strong technical foundations while developing real-world engineering intuition. My teaching approach combines clear theory, practical examples, problem-solving techniques, and design-oriented thinking. Courses are suitable for undergraduate and master’s students, PhD candidates, and professionals, as well as motivated high-school students preparing for engineering studies. Whether your goal is exam preparation, project support, or gaining confidence in electronics design, I adapt the course content and pace to your needs with professionalism, clarity, and encouragement.

Taiwo

4.85

(13)

This online mathematics class helps students build a deep understanding of concepts, strengthen problem-solving skills, and improve performance in school and international exams. I have supported students across various educational systems, helping them overcome learning gaps and develop confidence in math.

Lessons focus on understanding why methods work, not just memorizing formulas. Students learn step-by-step approaches, logical reasoning, and how to clearly explain their solutions—an essential skill for higher-level mathematics.

I support learners studying under curricula such as Cambridge, IGCSE, GCSE, IB (MYP & DP), A-Level, and other international programs. Whether a student needs help catching up, preparing for exams, or aiming for higher achievement, lessons are tailored to their pace and goals.

With structured practice, guided problem-solving, and exam-focused strategies, students gain both clarity and confidence.

Jose

4.85

(13)

This class provides an introduction to the fundamental principles of electrical and electronic engineering with emphasis on control systems and their industrial applications. Topics include basic electrical circuits, electronic components, signal analysis, and the modeling and control of dynamic systems. Students will explore how electrical and electronic technologies are used to design, analyze, and regulate modern engineering systems, including automation, power systems, and industrial processes. The course integrates theoretical concepts with practical examples to develop analytical and problem-solving skills relevant to engineering practice.