Introduction and Basic concepts of Autocad in Engineering aspects

From 272 Fr /h

AutoCAD is a Drafting software,2D diagram is presented using the software.The software is used used in many disciple in Mechanical,Civil,Electrical,Electronics Engineering to represent the ideas of a person in a virtual 2D image.The view can represent using the software.

Extra information

You should have the software installed in laptop or system

Location

Online from India

About Me

I will teach the Introduction and Basic of AutoCAD in the bases of Engineering and it's concepts.
Mechanical
Electrical
Electronics
Civil
And other courses too.

Education

I completed my Master in CAD and Bachelor in Mechanical Engineering and Now doing My PhD in Engineering Design at a Top ranking University in Kuala Lumpur Malaysia.

Experience / Qualifications

Six Experience as Lecturer,Assistant Professor in India and Oversea.
Worked with DRDO Indian Defense
Worked as Lecturer in Ethiopia,Africa

Age

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

The class is taught in

English

Skills

Mechanical engineering

Civil engineering

Electrical engineering

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Youssef

4.85

(13)

Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer support courses in the subjects of engineering sciences (Electronics, automatics, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism (propagation of high frequency waves)
Automatic (continuous, sampled)
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python,VHDL
PIC Microprocessor and Microcontroller
Signal processing and data acquisition
Engineering Sciences

These courses allow the student to get up to speed and regain confidence in all scientific subjects, just as they prepare him effectively for the Baccalaureate, the Preparatory Classes or various examinations of the engineering classes.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Matías

4.85

(13)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Haider

4.85

(13)

Welcome!

I have already completed my master’s degree in mechanical engineering and am currently doing my doctorate.

Tutoring is offered in

✔ Structural engineering
✔ Design
✔ Test method and technique
✔ Measurement technology
✔ FEA
✔ Fluid mechanics
✔ Hydromechanics
✔ Structural mechanics
✔ Fluid mechanics
✔ Electric drives
✔ Fluid dynamics
✔ MS Office (Word, PowerPoint, Excel, Visio, Project, Access, Outlook)

+ other subjects on request

When contacting please
Class / study / training and subject
notify!

I'm looking forward to your messages.

Adam

4.85

(13)

Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer for students of preparatory classes and technical high school support courses in the subjects of engineering sciences (Electronics, automatic, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism
Automatic
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python
PIC microcontroller
Microprocessor

These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Anh

4.85

(13)

If you're facing resit exams in engineering and want to make sure you succeed, I’m here to support you. These tailored tutoring sessions are designed specifically to help you overcome challenges, address any gaps in understanding, and reinforce the core principles of your engineering subjects. Together, we’ll revisit key concepts and solidify your foundation so you feel confident tackling future challenges.

Whether you're studying:
• Aerospace Engineering
• Aeronautical Engineering
• Mechanical Engineering
• Electrical Engineering
• other types of Engineering

You’ll build the knowledge and confidence needed to excel in your resit exams and beyond.

Contact me now for availability, and let's schedule your first session soon. I look forward to working with you!
__________________________________________________________________________________

I'm actively supporting students from top universities worldwide, including:

UK:
• Imperial College London (+ Business School) (ICL)
• University College London (UCL)
• King’s College London (KCL)

The Netherlands:
• Delft University of Technology (TUDelft)
• University of Amsterdam (UvA)
• University of Groningen (RUG)

Switzerland:
• ETH Zurich - Swiss Federal Institute of Technology

Australia:
• Queensland University of Technology (QUT)
• University of Queensland (UQ)
• Griffith University
__________________________________________________________________________________

My name is Anh, and I was born and raised in the U.K. With over 10 years of international experience tutoring Maths, Sciences, and Engineering from Middle School to University Level, I’ve supported over 80 students worldwide in unlocking their full potential.

I have a fun, ambitious, and outgoing personality, and I’m passionate about music, cooking, and trying new things. In my tutoring and mentoring, I am patient, adaptable, and committed to meeting the unique needs of each student.

I work as an Engineering Specialist/Consultant, holding:
• Master’s degree in Aeronautical Engineering from Imperial College London,
• AAA* A-Level in Further Maths and Physics,

Having been mentored and tutored myself, I understand the challenges students face. Through my own experiences of overcoming obstacles and achieving success, I’m passionate about helping others do the same. Let’s work together to ensure you reach your full potential, both academically and personally!

Gabby

4.85

(13)

Experienced Math, Physics and Engineering tutor for high school, IB and university courses. I enjoy encouraging high school and university students to find a passion for math, physics, and stem topics. I can help with homework problems, exam studying and learning content. I'm living in Palma, and am able to meet at the students home, or I have access to a work space near Placa d'Espana. I can also offer classes online. I obtained a degree in Mechanical Engineering from the University of British Columbia and achieved top marks. I love design, engineering and machining so can help with student's design or engineering related aspirations. Furthermore, I could support with engineering and science applications for university programs, and can provide insight into the university landscape in Canada. Over a year ago I moved to Palma from Canada to improve my Spanish and work as an mechanical engineer in the marine industry.

Tim

4.85

(13)

Need help with mechanics, physics, or thermodynamics? As a 33-year-old civil engineer, I'm happy to help! I'll learn at your own pace, using plenty of examples to illustrate the material. I have years of experience teaching both simple and complex subjects.

The lessons run as follows. First, we look together for the student's biggest stumbling blocks. These can be related to the subject matter as well as to the study method. From there, I work at the pace of the student and encourage them to ask as many questions as possible. I also give tips and tricks, and improve their working methods where necessary. During the lesson I give many examples to make the subject matter more interesting and we solve exercises together. Once practiced from the lesson, I mastered challenging exercises to also test the deeper understanding of the subject matter. In this way I try to optimally prepare the student for his/her exam test.

However, learning should also be enjoyable. That is why I always strive for a bond with the student through a spontaneous and positive approach. I am also very patient. All this to solve and improve the problems.

Are you interested? Don't hesitate to receive me!
Please come!

Tim

علاء

4.85

(13)

Principles of using visualization methods for geometric shapes, front, top, back, and side facades, with an explanation of drawing methods on paper, along with the use of appropriate tools for engineering drawing, for students of mechanical, architectural, and industrial engineering and all engineering disciplines that study the subject of engineering design and its principles. Designs for products of mechanical elements and components can be made to be ready for drawing through programs such as AutoCAD and then 3D printing to visualize the product and then manufacturing and production. The courses also contribute to understanding shapes and ways to deal with them with the required sizes and engineering details and the types of paper suitable for engineering drawing.

Ali

4.85

(13)

I teach Electrical and Electronic Engineering online to university students, postgraduates, college students and serious self learners across the UK and Europe. Lessons are in English.

I hold an MSc in Electronics and Electrical Engineering with Distinction and I teach as a Visiting Lecturer on a Master's level module at a UK university. I also work as a freelance electronics engineer, designing circuit boards and writing firmware for real clients, and I have two accepted international conference papers. I set and mark university assignments myself, so I know where marks are won and lost on lab reports, coursework and project write ups.

Who this is for

Undergraduates on electrical, electronic, mechatronic or general engineering degrees at any European university. Final year, Master's and thesis students working on an engineering project. A Level, IB and college students taking physics or engineering. Career changers and self taught learners who want the fundamentals done properly rather than picked up from scattered videos.

I work with students on UK, IB and continental European programmes. An unfamiliar syllabus or a module structured differently from the UK is not a problem. Send me the material and I will work from it.

What we cover

Circuit analysis in DC and AC, including Kirchhoff's laws, Thevenin and Norton equivalents, superposition, phasors and AC power. Operational amplifiers and analogue electronics. Digital electronics and logic design. Signals and Systems and Digital Signal Processing, covering Fourier analysis, Laplace and z transforms, sampling and filter design. Control systems, transfer functions, root locus, Bode plots, stability and PID tuning. Semiconductor devices and power electronics. Embedded systems and microcontroller programming in C with Arduino, ESP32 and PIC. Simulation and tooling including MATLAB, Simulink, LTspice, Multisim and Proteus. Circuit board design in KiCAD. Lab reports, coursework, project supervision and exam technique.

How lessons work

Send me your lecture notes, assignment brief, lab sheet or the circuit that refuses to work, and I plan the session around it before we meet. Nothing generic.

Most students are stuck on one or two specific ideas rather than a whole module, so the first job is finding out which. Then we work through it with proper worked examples and real circuit diagrams, and I hand the problem back to you while I watch and correct, because you learn far more doing it than watching me do it.

If the real gap is the maths underneath a topic, complex numbers, phasors, Laplace transforms, we go back and fix that first, because everything after it depends on it.

You finish each session with annotated notes and a clear next step, and you can message me between lessons with questions.

Practical details

Lessons are online over Google Meet or Zoom, with screen sharing and a shared whiteboard so we can draw circuits and work through derivations together. Sessions run 60 or 90 minutes. Evenings and weekends available across European time zones.

Tell me your module, your deadline and exactly where you are stuck, and I will come back with a plan for the first session.

عبدالرحمن

4.85

(13)

I am Engineer Abdel Rahman Abdel Aal, a university instructor specializing in explaining engineering subjects in a simplified and interactive manner via Zoom.

God willing, our lessons aim to provide a deep and systematic understanding of the curriculum content, through simplified and interactive explanations that adapt to each student's level.

🔹 Short tests are given periodically to measure understanding and stimulate concentration, while clarifying the differences between similar concepts to prevent distraction.

🔹 I rely on various examples, patience, and gradual delivery of information in my explanation, until the student reaches full understanding with confidence.

🔹 There is continuous follow-up via WhatsApp or Telegram throughout the semester to answer questions and help the student with studying and solving problems as they occur.

💻 The explanation is conducted online via Zoom, with a full recording of each session provided, so that the student can review it at any time.

🎯 Our goal is not just to pass the subject, but to excel in it and understand it in an easy and consistent manner, God willing.

Reza

4.85

(13)

I hold a PhD in Mechanical Engineering and currently work as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).
Key topics that I teach for this course include:
• Calculus: Differentiation & integration, Multivariable calculus
• Linear Algebra: Matrices, vectors, systems of equations, Eigenvalues and eigenvectors
• Differential Equations: First- and second-order ODEs, Laplace transforms
• Complex Numbers: Polar form, Euler’s formula
• Vector Calculus: Gradient, divergence, curl, Line and surface integrals
• Series & Transforms: Taylor series, Fourier series

I understand that not all teachers excel in teaching Engineering and Mathematics courses and explaining their importance to students. Courses with strong mathematical backgrounds may become boring for students who lack a solid mathematical basis. To address this, I take a student-centered approach, starting from the basics to actively engage all students, including those with weaker mathematical backgrounds. I also provide practical examples to demonstrate the real-world significance of what they are learning, inspiring and fostering their interest in the subject matter.

If you have any additional questions before starting a class, please feel free to ask me. I am here to assist! :)

Alaaeldin

4.85

(13)

Learn PLAXIS 2D & 3D and Geotechnical Engineering with a PhD Researcher in France!

I am a PhD candidate in Geotechnical Engineering at the University of Lille, France, specializing in finite element modelling (FEM), soil–structure interaction, and advanced numerical simulations.

I offer personalized online lessons for civil engineering students, master's and PhD students, researchers, and practicing engineers.

What you can learn:

PLAXIS 2D & 3D
Getting started with PLAXIS and understanding the modelling workflow.
Geometry creation, soil layers, materials, and boundary conditions.
Soil constitutive models and parameter selection.
Mesh generation and staged construction.
Foundation settlement and soil–structure interaction.
Retaining walls, excavations, and underground structures.
Results interpretation and model validation.

Geotechnical Engineering

Soil Mechanics and Foundation Engineering.
Earth pressure and retaining structures.
Settlement and bearing capacity.
Soil–structure interaction.
Personalized Learning

Lessons are adapted to your experience, from beginner to advanced level. We can work through practical examples, discuss theoretical concepts, or review your own numerical models step by step.

My goal is to help you understand both the engineering principles and their practical implementation in numerical modelling software.

Lessons are available online in English, Arabic, or French.

Feel free to contact me to discuss your learning objectives and arrange a personalized lesson!

Norbert

4.85

(13)

Ik stem mijn aanpak volledig af op jouw behoeften.

Samen werken we toe naar wat jij nodig hebt, of het nu gaat om lesstof uit studieboeken of om specifieke praktische vaardigheden.

Tijdens de proefles bespreken we je doelen en stellen we een plan op. Indien nodig passen we dat gaandeweg samen aan.

Hakan

4.85

(13)

I offer personalized Mechanical Engineering lessons for university students who want to strengthen their understanding of core engineering subjects, prepare for exams, solve assignments, or improve their problem-solving skills.

My main teaching areas include:

Thermodynamics

Fluid Mechanics

Heat Transfer

Engineering Mathematics

Calculus

Physics

Computational Fluid Dynamics (CFD)

ANSYS Fluent fundamentals and engineering applications

My lessons focus on understanding the physical and mathematical principles behind engineering problems rather than simply memorizing formulas. I explain concepts step by step, work through practical examples, and adapt the lesson to the student's current level and objectives.

Lessons can be used for exam preparation, topic revision, homework and problem-solving practice, or structured study throughout the semester.

As a mechanical engineer with university teaching and laboratory experience, I aim to connect theoretical concepts with real engineering applications whenever possible.

Mohamed

4.85

(13)

I am an electrical engineering lecturer, researcher, and online tutor specializing in electrical power systems and power system protection. I have over **8 years of teaching experience in electrical engineering**, helping university students understand complex engineering concepts, solve challenging problems, and prepare effectively for examinations.

## Academic Qualifications

- PhD Studies in Electrical Engineering
- Master’s Degree in Electrical Engineering.
- Bachelor’s Degree in Electrical Engineering.

## Subjects I Teach

I offer online tutoring for undergraduate electrical engineering students in the following subjects:

- **Electrical Circuits:** Circuit analysis, network theorems, AC/DC circuits, and transient analysis.
- **Electrical Machines:** Transformers, DC machines, induction motors, and synchronous machines.
- **Power Systems:** Power generation, transmission, distribution, and power system analysis.
- **Power System Protection:** Protective relays, overcurrent protection, distance protection, and transmission line protection.
- **Power System Stability:** Steady-state and transient stability fundamentals.
- **Short-Circuit Analysis:** Fault calculations and symmetrical components.
- **Energy Conversion:** Electromechanical energy conversion and related applications.
- **Renewable Energy Systems:** Solar and wind energy systems.
- **High Voltage Engineering:** High-voltage generation, measurement, insulation, and breakdown phenomena.
- **High-Voltage Substations:** Substation equipment, layouts, busbar configurations, and protection fundamentals.

## Research Interests and Technical Skills

My research focuses on modern power system protection, particularly wide-area backup protection, fault detection, phasor measurement units (PMUs), and the application of artificial intelligence and machine learning to power system protection.

I use engineering software and computational tools to support teaching, analysis, simulation, and problem-solving, including:

- **MATLAB / Simulink:** Modeling, simulation, and analysis of electrical systems.
- **ETAP:** Power system studies and electrical network analysis.
- **Python:** Numerical computation and machine learning applications.
- **GAMS:** Mathematical optimization and energy system modeling.

## My Teaching Approach

I believe that successful engineering education requires more than memorizing equations. Students need to understand the physical meaning of concepts, know when and how to apply equations, and develop a systematic approach to solving engineering problems.

My lessons focus on:

- Explaining concepts clearly, starting from the fundamentals.
- Deriving important equations and mathematical relationships step by step.
- Solving numerical problems with detailed explanations.
- Practicing university examination questions and past papers.
- Connecting theoretical concepts with practical engineering applications.
- Using MATLAB, Simulink, and other engineering tools when appropriate.
- Identifying common mistakes and developing effective problem-solving strategies.
- Preparing personalized revision sessions based on each student's syllabus and learning objectives.

## Online Tutoring Experience

My online lessons are interactive and tailored to each student's academic level, university syllabus, and individual needs. I use screen sharing, digital whiteboards, worked examples, and engineering simulations to make difficult topics easier to understand.

Whether you need help understanding a challenging lecture, solving complex numerical problems, reviewing an entire course, or preparing for an upcoming examination, I can provide structured guidance and step-by-step explanations.

**My goal is to help you develop a strong understanding of electrical engineering, improve your problem-solving skills, and approach your university examinations with confidence.**