Interior and Exterior Lighting Course by Webcam - Sousse

Translated by GoogleSee original

Interior and Exterior Lighting Course by Webcam

From 29.48 $ /h

This course will contain all of these chapters:
Introduction
Photometric quantities
Lighting devices
* Light sources
* Lighting fixtures
Lighting quality criteria
Preliminary lighting project
Applications on real lighting projects

Location

Online from Tunisia

About Me

University lecturer in Electrical Engineering and Electrical Consulting Engineer with 20 years of experience gives online courses in electricity; Electrical Engineering and Electrotechnics.

Education

Electrical Engineer and DEA in Automation and Industrial Computing
Specialist in Electrotechnics (Low Voltage Electrical Installation Engineering)

Experience / Qualifications

20 years of experience as an Electrical Engineering Technologist Currently Electrical Engineering Technologist
Electrical Consulting Engineer for the Construction Sector

Age

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

The class is taught in

Arabic

Italian

English

French

Skills

Engineering

Electrical engineering

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Detailed course in Domestic Electricity by Webcam

29.48 $ /h

This course will contain all of these chapters:
General Theme:
DOMESTIC DISTRIBUTION – SMALL AGRICULTURAL – SMALL TERTIARY
Chapters:
1 DELIVERY OF ENERGY
2 ELECTRICAL INSTALLATION OF A HOUSE
3 DIAGRAMS OF THE DOMESTIC INSTALLATION
4 Main installation rules
5 DRIVER SECTIONS
6 CALIBER OF PROTECTIONS
7 CASES OF BATHROOMS
8 DISTRIBUTION TABLE
9 Electrical conduits
10 EQUIPMENT
11 PROTECTION OF PROPERTY
12 USER PROTECTION
13 Surge Protection

Electrotechnics Low Voltage Electrical Installations

29.48 $ /h

Several courses on Low Voltage electrical installations
General design rules
Connection
LV Distribution Architecture
LV equipment
Power Budget
Circuit Protection
Choice of pipes
Electrical Safety
Power surges
Reactive energy compensation
Domestic Facilities
NFC15-100 standard.

4.85

(13)

I offer teaching courses in electrical engineering and electronics (private lessons or holiday courses) to deal with the difficulties encountered by students during their schooling, as part of an individual follow-up that respects the rhythm specific to each.
These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Matías

4.85

(13)

Do you want to master the most used design software and bring your ideas to life in 3D? Do not search anymore ! I offer specialized courses to guide you through the exciting worlds of CATIA V5/V6, Inventor, Fusion 360, FreeCAD and 3D printing.

CATIA V5/V6: Discover the design software preferred by engineers for creating complex models and precise assemblies.

Inventor: Dive into the world of mechanical design and learn how to develop innovative products with this powerful software.

Fusion 360: Create organic models, run simulations, and hone your design and engineering skills.

FreeCAD: Explore the basics of parametric design and create 3D models ready for manufacturing.

️ 3D printing: Bring your designs to life! Learn how to use 3D printers, from modeling to concrete production.

Whether you're a beginner or looking to improve your skills, my classes are suitable for all levels. With interactive lessons, hands-on projects, and expert guidance, you'll progress quickly and with confidence.

Don't wait to explore the endless potential of 3D design and 3D printing. Join me on this exciting adventure and start creating your own 3D masterpieces today!

Don't miss this opportunity to develop in-demand skills in 3D design and printing. Join me for enriching and practical lessons you won't forget!

See you soon for our first class together!

Youssef

4.85

(13)

..................................... (satisfied or refunded)........ .......
Electrical engineering expert
PhD student in electrical engineering and renewable energies
engineer in electrical engineering and industrial computing
I offer home schooling courses to deal with the difficulties encountered by students during their schooling,
These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.
===Automatic (Servo-control and automatism regulation (discrete, continuous)========
===Electrical engineering (electrical machines) and power electronics (inverter rectifier)=======
===Continuous and sampled signal processing=================
===VHDL programming, microcontroller and microprocessor (intel, ARM)============
===High frequency electronics (transistor, diode, AOP, noise)============
===Propagation of electromagnetic waves and antennas========
===Analog and digital electronics (filters, flip-flops, sysml,Grafcet,amplifier)=====
=== Realization of electrical projects
===MATLAB ARDUINO Proteus ISIS
=== Renewable energies

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This pedagogical approach is effective since it has often led me to interesting results with my students.

Samaa

4.85

(13)

With over 4 years of experience I teach math curriculums (GCSE, IGCSE, IB CNISE, SAT) to students from earlier stages, elementary to high school. I focus on all mathematical concepts, develop classroom materials, organize activities, assign homework, grade tests, and prepare students for exams. I prepare mathematics curriculum for my students, like college entrance exams.

I demonstrate excellent mathematics skills and analytical thinking alongside solid instruction. I instruct my students throughout the year and create lesson plans, assign homework, and manage online classrooms. I keep in touch with parents to be aware of the progress.
I hold a Master's degree in Engineering with teacher education courses and I've achieved the highest grades in my math courses throughout the years with straight A Grades.

My Responsibilities towards my students
-Create a great environment that is conducive to learning.
-Care for and effectively assist students with special concerns.
-Analyze data to determine student progress and achievement.
-Work with individual and small groups of students to support mathematics instruction.
-Encourage students who need extra help
-Plan and carry out instructions, activities and prepare learning materials.
-Maintain appropriate records and follow required procedures and practices.
-Work with students to develop and monitor academic goals for both short-term and long-term success.

My qualifications
-Master Degree in Engineering
-An experienced teacher for over 4 years
-Experience with calculus, geometry, statistics, and trigonometry.
-Dedication to instruction of critical thinking and problem-solving with confidence in a collaborative environment.
- Leadership skills and a positive attitude when assisting with decision making.
-Demonstrated professionalism and dedication to continuous improvement.
-Time management skills.

Ayoub

4.85

(13)

This preparation session is dedicated to students aiming for preparatory classes for scientific Grandes Ecoles (CPGE), with a particular focus on the subjects of Physics and Engineering Sciences. The goal is to strengthen the foundations and deepen the knowledge to succeed.

1. Mechanics:
Kinematics: Study of rectilinear and circular movements, position vectors, speed and acceleration.
Dynamics: Newton's laws, work and energy, kinetic energy theorem.

2. Electromagnetism / Electrokinetics:
Electrostatics: Electric charges and fields, electric potential, capacitance.
Magnetostatics: Magnetic fields, Lorentz forces, electromagnetic induction.
Alternating Currents: RLC circuits, resonance, impedance.

3. Thermodynamics:
Principles of thermodynamics: Internal energy, heat, work, first and second principles.
Ideal and real gases: Equations of state, thermodynamic transformations.

4. Industrial sciences:
Automatic Linear, Kinematic, Static.

For more information and to register for the preparation session, please contact me.

Good preparation and success in your studies!

.

Roland

4.85

(13)

The TU Delft Aerospace Engineering Bachelor is one of the most prestigious bachelor programmes the Netherlands has to offer. With it being highly sought-after by students all around the globe, there is a highly competitive selection procedure which needs to be completed to get admitted to this popular degree. A massive part of this admission procedure is the selection exam, consisting of three different tests: Mathematics, Physics and First-Year Material.

As a cum laude graduated Aerospace Engineer at TU Delft, who has also been tutoring since 2017, I have a lot of valuable experience and knowledge of the program to help you out with the right preparation to get in. Moreover, after successfully helping more than 10 students secure a spot over the last three years, I have decided to prepare an additional custom lesson plan for each student, based on the admission syllabus, to ensure an even higher chance of admission.

With my calm and stepwise explanation, weaker topics will be addressed, and your solution procedures will be polished. Each lesson will either be theory, exercise-based or an opportunity to talk about the admission, student life, Delft, what to expect from the study and whether it is the right fit for you.

Marcos

4.85

(13)

80% of my students got accepted in the 2025 exam, I am sure I can help you out in the 2026 exam!

TU Delft is Europe's most prestigious university for aerospace studies, preparing some of the best engineers. However the selection procedure is tough and demanding, and only those prepared have a chance to succeed.

As a TU Delft student, I know from first hand how stressfull this process is, and can therefore help you succeed in the preparation of these exams. I have previous experience as a tutor back in high school, helping students improve their grades from Cs to As.

Moreover, I have an extensive knowledge on the subjects tested on these exams, having taken them myself, completed the courses at university with excellent grades and teaching over 10 students for the entrance exam.

Throughout the class, I will use a presentation to explain the main concepts of each exam (Maths, Physics and Aerospace Engineering), focusing on those subjects the student is struggling with most. After this, I will help the student complete some practice excercises, and then assign extra practice to complete on their own time. These exercises will then be reviewed in the following class to ensure the topics have been understood.

I am looking forward to help you in your journey as an aerospace engineer!

Fernando

4.85

(13)

Do you need extra help with maths and/or physics? I'm an experienced tutor in these two subjects, teaching university and pre-university students worldwide (Switzerland, the UK, Spain, France, and Dubai).

Linear Algebra:
-Linear systems of equations. Types and solving
-Vectors and vector spaces. Orthogonality. Dot and cross product. Matrices
-Linear dependency
-Space generator systems and bases
-Different types of equations that define a straight line and a plane
-Linear applications and change of base
-Eigenvalues and eigenvectors
-Diagonalization
-Etc

Calculus:
-Functions of one and more variables: limits and continuity, calculation of derivatives, their application and implicit differentiation. Optimization for functions of more than one variable (without restrictions and with Lagrange multipliers)
-Numerical and functional series: sequences, limit and convergence of a sequence. Relationship between numerical series and sequences. Geometric series, types. Absolute and conditional convergence, methods. Function series: power series, Taylor and MacLaurin series, and their interval of convergence. Fourier series
-Integration: properties, relationship between differential and integral calculus, calculus of primitives, improper integrals and applications of the integral (calculation of areas, volumes and surfaces)

Mechanics:
-Kinematics
-Particle Dynamics
-Work and Energy
-Rotational Dynamics
-Rigid body Statics
-Introduction to Fluid Mechanics
-Waves and Oscillations

If you're interested, please don't hesitate to contact me and tell me a bit more about your situation and academic needs. This way, I can get a better understanding of your context and therefore organize and prepare the classes in a more personalized way.

See you in class!

Alice

4.85

(13)

The classes introduce students to the fundamental principles and problem-solving methods used in math, physics, and engineering, with an emphasis on logical reasoning, mathematical modeling, and real-world applications. Through a mix of theory, worked examples, and hands-on exercises, students learn how to translate physical or practical problems into equations, analyze systems using quantitative tools, and interpret results critically. I focus on building a strong analytical foundation that supports advanced study and equips students with skills commonly used in scientific research and engineering design.

Taiwo

4.85

(13)

This online mathematics class helps students build a deep understanding of concepts, strengthen problem-solving skills, and improve performance in school and international exams. I have supported students across various educational systems, helping them overcome learning gaps and develop confidence in math.

Lessons focus on understanding why methods work, not just memorizing formulas. Students learn step-by-step approaches, logical reasoning, and how to clearly explain their solutions—an essential skill for higher-level mathematics.

I support learners studying under curricula such as Cambridge, IGCSE, GCSE, IB (MYP & DP), A-Level, and other international programs. Whether a student needs help catching up, preparing for exams, or aiming for higher achievement, lessons are tailored to their pace and goals.

With structured practice, guided problem-solving, and exam-focused strategies, students gain both clarity and confidence.

Arturo

4.85

(13)

In this course, you will learn to design digital circuits and program computers using integrated circuits, microcontrollers, simulators, and academic and industrial languages and tools through the development of agile engineering projects to enhance your STEM skills. You will also develop your emotional intelligence and apply learning and metacognitive techniques that will contribute to your intellectual autonomy.

Dr.

4.85

(13)

STEM or STEAM involves learning about:
1. Science
2. Technology
3. Engineering
4. Arts
5. Mathematics
The course is developed to give middle school learners a broad, comprehensive overview of these fields of study. Learners are introduced to career planning, so they become aware of the major course competencies that they need to develop. The careers vary from teaching to space studies.

Magdalene

4.85

(13)

Mini Makers STEM Lab is a hands‐on, online class where young creators explore early engineering, problem‐solving, and imagination using simple materials they already have at home. Each session features a guided STEM project—like paper helicopters, balloon rockets, marshmallow towers, or DIY parachutes—designed to build confidence, fine motor skills, and curiosity.
Kids follow along step‐by‐step on camera, test their creations, make improvements, and share what they built. The focus is on creativity, exploration, and learning through play. This class is warm, encouraging, and perfect for children who love building, experimenting, and making things with their hands.

Jose

4.85

(13)

This class provides an introduction to the fundamental principles of electrical and electronic engineering with emphasis on control systems and their industrial applications. Topics include basic electrical circuits, electronic components, signal analysis, and the modeling and control of dynamic systems. Students will explore how electrical and electronic technologies are used to design, analyze, and regulate modern engineering systems, including automation, power systems, and industrial processes. The course integrates theoretical concepts with practical examples to develop analytical and problem-solving skills relevant to engineering practice.

Ali

4.85

(13)

If you want clear, exam-ready Engineering and Mechanical Engineering help, this is a strong fit.

My difference: you send your materials first, I confirm fit, then we use a repeatable system that builds results fast.

FAST START (SEND MATERIALS FIRST)
---------------------------------------------------
Send your syllabus or PDF slides, past papers, tutorial sheets, or assignment brief.

I confirm fit before we book. If it is outside my strengths, I will tell you directly.

WHAT I HELP WITH (HIGH-INTENT TOPICS)
---------------------------------------------------
• Thermodynamics
• Solid Mechanics / Strength of Materials
• Engineering Dynamics
• Control Systems
• Engineering Materials
• MATLAB + Simulink (modelling, simulation, verification)

HOW EACH LESSON WORKS (TYPICAL SESSION)
---------------------------------------------------
1) Diagnose
• identify the exact weak point, concept, method, or exam technique

2) Build (clear and fast)
• definitions, assumptions, units, sign conventions
• diagrams where needed (FBD, shear and moment, block diagrams)

3) Solve (guided)
• I show the method on a representative question
• you solve a similar one with live correction
• quick checks, units, limits, sanity

4) Exam mode (when relevant)
• past papers, mark schemes, what earns marks
• speed, structure, presentation

AFTER EACH LESSON (WHAT YOU RECEIVE)
---------------------------------------------------
• short revision note, key method + mistakes to avoid
• focused practice list
• progress note, strengths, gaps, next targets

Optional: recorded session for revision

MATLAB / SIMULINK SUPPORT (WHEN NEEDED)
---------------------------------------------------
• modelling, simulation, plotting, debugging
• verify results against theory, interpret correctly

COURSEWORK + ASSIGNMENTS (LEGIT SUPPORT ONLY)
---------------------------------------------------
• understand the brief, plan your approach, improve your method
• review your work, fix errors, strengthen reasoning

No done-for-you submissions, no cheating.

MESSAGE ME LIKE THIS (FAST REPLY)
---------------------------------------------------
1) Level:
2) Module/Course name:
3) Exam date or deadline:
4) Topics:
===================================