Mechanical Engineering and Engineering Tutor (Online) | Thermodynamics, Solid Mechanics, Dynamics, Control Systems, Engineering Materials

From 41.74 € /h

If you want clear, exam-ready Engineering and Mechanical Engineering help, this is a strong fit.

My difference: you send your materials first, I confirm fit, then we use a repeatable system that builds results fast.

FAST START (SEND MATERIALS FIRST)
---------------------------------------------------
Send your syllabus or PDF slides, past papers, tutorial sheets, or assignment brief.

I confirm fit before we book. If it is outside my strengths, I will tell you directly.

WHAT I HELP WITH (HIGH-INTENT TOPICS)
---------------------------------------------------
• Thermodynamics
• Solid Mechanics / Strength of Materials
• Engineering Dynamics
• Control Systems
• Engineering Materials
• MATLAB + Simulink (modelling, simulation, verification)

HOW EACH LESSON WORKS (TYPICAL SESSION)
---------------------------------------------------
1) Diagnose
• identify the exact weak point, concept, method, or exam technique

2) Build (clear and fast)
• definitions, assumptions, units, sign conventions
• diagrams where needed (FBD, shear and moment, block diagrams)

3) Solve (guided)
• I show the method on a representative question
• you solve a similar one with live correction
• quick checks, units, limits, sanity

4) Exam mode (when relevant)
• past papers, mark schemes, what earns marks
• speed, structure, presentation

AFTER EACH LESSON (WHAT YOU RECEIVE)
---------------------------------------------------
• short revision note, key method + mistakes to avoid
• focused practice list
• progress note, strengths, gaps, next targets

Optional: recorded session for revision

MATLAB / SIMULINK SUPPORT (WHEN NEEDED)
---------------------------------------------------
• modelling, simulation, plotting, debugging
• verify results against theory, interpret correctly

COURSEWORK + ASSIGNMENTS (LEGIT SUPPORT ONLY)
---------------------------------------------------
• understand the brief, plan your approach, improve your method
• review your work, fix errors, strengthen reasoning

No done-for-you submissions, no cheating.

MESSAGE ME LIKE THIS (FAST REPLY)
---------------------------------------------------
1) Level:
2) Module/Course name:
3) Exam date or deadline:
4) Topics:
===================================

Extra information

You can review the above description for information, and don't hesitate to contact me to ask any questions. You're welcome...

Location

Online from United Kingdom

About Me

I am an Aerospace Engineering student at the Institute of Space Technology, Islamabad, and an experienced online tutor for engineering and STEM subjects. I help students develop real understanding in engineering topics through clear explanations, structured lessons, and step-by-step problem solving. My approach is not based on rushed memorisation. It is based on concept clarity, logical thinking, and practical application.

I work with students at school, college, and university level who need help in engineering fundamentals, mathematics for engineering, physics-based reasoning, assignments, exam preparation, and technical confidence. I particularly enjoy supporting students who find engineering overwhelming and want a tutor who can break difficult topics into manageable parts. My aim is to help students improve both their grades and their way of thinking, so they can solve problems independently and perform better over the long term.

Education

Education

B.E. Aerospace Engineering, Institute of Space Technology, Islamabad
Senior-year undergraduate student

Relevant academic background in engineering mechanics, thermodynamics, aerodynamics, control systems, propulsion, numerical analysis, CAD, artificial intelligence, digital systems, and spacecraft dynamics

Experience / Qualifications

I have been teaching online for several years and have worked with students across different levels in STEM and technical subjects. My tutoring experience includes helping students strengthen weak concepts, improve problem-solving ability, prepare for exams, and handle assignments with a more structured method.

As an Aerospace Engineering student, I bring an applied engineering perspective to my lessons. I do not only explain theory, I connect concepts with real engineering logic and practical understanding. I am best suited for students who want disciplined, concept-focused support in engineering-related subjects and who value a patient tutor with a systematic teaching approach.

Age

Children (7-12 years old)

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

The class is taught in

English

Urdu

Panjabi

Hindi

Skills

Engineering

Mechanical engineering

Thermodynamics

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Matías

4.88

(85)

Do you want to master the most used design software and bring your ideas to life in 3D? Do not search anymore ! I offer specialized courses to guide you through the exciting worlds of CATIA V5/V6, Inventor, Fusion 360, FreeCAD and 3D printing.

CATIA V5/V6: Discover the design software preferred by engineers for creating complex models and precise assemblies.

Inventor: Dive into the world of mechanical design and learn how to develop innovative products with this powerful software.

Fusion 360: Create organic models, run simulations, and hone your design and engineering skills.

FreeCAD: Explore the basics of parametric design and create 3D models ready for manufacturing.

️ 3D printing: Bring your designs to life! Learn how to use 3D printers, from modeling to concrete production.

Whether you're a beginner or looking to improve your skills, my classes are suitable for all levels. With interactive lessons, hands-on projects, and expert guidance, you'll progress quickly and with confidence.

Don't wait to explore the endless potential of 3D design and 3D printing. Join me on this exciting adventure and start creating your own 3D masterpieces today!

Don't miss this opportunity to develop in-demand skills in 3D design and printing. Join me for enriching and practical lessons you won't forget!

See you soon for our first class together!

Anh

4.88

(85)

If you're facing resit exams in engineering and want to make sure you succeed, I’m here to support you. These tailored tutoring sessions are designed specifically to help you overcome challenges, address any gaps in understanding, and reinforce the core principles of your engineering subjects. Together, we’ll revisit key concepts and solidify your foundation so you feel confident tackling future challenges.

Whether you're studying:
• Aerospace Engineering
• Aeronautical Engineering
• Mechanical Engineering
• Electrical Engineering
• other types of Engineering

You’ll build the knowledge and confidence needed to excel in your resit exams and beyond.

Contact me now for availability, and let's schedule your first session soon. I look forward to working with you!
__________________________________________________________________________________

I'm actively supporting students from top universities worldwide, including:

UK:
• Imperial College London (+ Business School) (ICL)
• University College London (UCL)
• King’s College London (KCL)

The Netherlands:
• Delft University of Technology (TUDelft)
• University of Amsterdam (UvA)
• University of Groningen (RUG)

Switzerland:
• ETH Zurich - Swiss Federal Institute of Technology

Australia:
• Queensland University of Technology (QUT)
• University of Queensland (UQ)
• Griffith University
__________________________________________________________________________________

My name is Anh, and I was born and raised in the U.K. With over 10 years of international experience tutoring Maths, Sciences, and Engineering from Middle School to University Level, I’ve supported over 80 students worldwide in unlocking their full potential.

I have a fun, ambitious, and outgoing personality, and I’m passionate about music, cooking, and trying new things. In my tutoring and mentoring, I am patient, adaptable, and committed to meeting the unique needs of each student.

I work as an Engineering Specialist/Consultant, holding:
• Master’s degree in Aeronautical Engineering from Imperial College London,
• AAA* A-Level in Further Maths and Physics,

Having been mentored and tutored myself, I understand the challenges students face. Through my own experiences of overcoming obstacles and achieving success, I’m passionate about helping others do the same. Let’s work together to ensure you reach your full potential, both academically and personally!

Youssef

4.88

(85)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Tim

4.88

(85)

Need help with mechanics, physics, or thermodynamics? As a 33-year-old civil engineer, I'm happy to help! I'll learn at your own pace, using plenty of examples to illustrate the material. I have years of experience teaching both simple and complex subjects.

The lessons run as follows. First, we look together for the student's biggest stumbling blocks. These can be related to the subject matter as well as to the study method. From there, I work at the pace of the student and encourage them to ask as many questions as possible. I also give tips and tricks, and improve their working methods where necessary. During the lesson I give many examples to make the subject matter more interesting and we solve exercises together. Once practiced from the lesson, I mastered challenging exercises to also test the deeper understanding of the subject matter. In this way I try to optimally prepare the student for his/her exam test.

However, learning should also be enjoyable. That is why I always strive for a bond with the student through a spontaneous and positive approach. I am also very patient. All this to solve and improve the problems.

Are you interested? Don't hesitate to receive me!
Please come!

Tim

Samaa

4.88

(85)

With over 4 years of experience I teach math curriculums (GCSE, IGCSE, IB CNISE, SAT) to students from earlier stages, elementary to high school. I focus on all mathematical concepts, develop classroom materials, organize activities, assign homework, grade tests, and prepare students for exams. I prepare mathematics curriculum for my students, like college entrance exams.

I demonstrate excellent mathematics skills and analytical thinking alongside solid instruction. I instruct my students throughout the year and create lesson plans, assign homework, and manage online classrooms. I keep in touch with parents to be aware of the progress.
I hold a Master's degree in Engineering with teacher education courses and I've achieved the highest grades in my math courses throughout the years with straight A Grades.

My Responsibilities towards my students
-Create a great environment that is conducive to learning.
-Care for and effectively assist students with special concerns.
-Analyze data to determine student progress and achievement.
-Work with individual and small groups of students to support mathematics instruction.
-Encourage students who need extra help
-Plan and carry out instructions, activities and prepare learning materials.
-Maintain appropriate records and follow required procedures and practices.
-Work with students to develop and monitor academic goals for both short-term and long-term success.

My qualifications
-Master Degree in Engineering
-An experienced teacher for over 4 years
-Experience with calculus, geometry, statistics, and trigonometry.
-Dedication to instruction of critical thinking and problem-solving with confidence in a collaborative environment.
- Leadership skills and a positive attitude when assisting with decision making.
-Demonstrated professionalism and dedication to continuous improvement.
-Time management skills.

Francisco

4.88

(85)

With 7+ years' experience in education, I have coached over 50 students to improve their academic results and boost their confidence in math and physics.

My tutoring services always include a personalized plan for each student. This plan is established during the first session where I like to meet the student, better understand their difficulties and get to know their schedule.

In the first session, we will:

- Get to know each other.
- Understand the student's strengths and identify areas for improvement.
- Understand the student's needs and difficulties.
- Get to know the student's schedule.
- Create a tutoring plan

Typically, sessions take place as follows:
i. Theoretical review of complex concepts in simple terms
ii. Tips for solving problems
iii. Abundance of exercises from my databases (exams, exercises)

If you are interested in my services, please provide the following information when contacting me:

- School system (French Bac, Matu, IB, A-levels)
- Location of tutoring (or video tutoring if applicable)
- Number of sessions per week and preferred days and times of the week (this can also be discussed after the first session, if you prefer)

Check out my profile if you want to know more about me :)

See you soon,
Francisco

Ayoub

4.88

(85)

This preparation session is dedicated to students aiming for preparatory classes for scientific Grandes Ecoles (CPGE), with a particular focus on the subjects of Physics and Engineering Sciences. The goal is to strengthen the foundations and deepen the knowledge to succeed.

1. Mechanics:
Kinematics: Study of rectilinear and circular movements, position vectors, speed and acceleration.
Dynamics: Newton's laws, work and energy, kinetic energy theorem.

2. Electromagnetism / Electrokinetics:
Electrostatics: Electric charges and fields, electric potential, capacitance.
Magnetostatics: Magnetic fields, Lorentz forces, electromagnetic induction.
Alternating Currents: RLC circuits, resonance, impedance.

3. Thermodynamics:
Principles of thermodynamics: Internal energy, heat, work, first and second principles.
Ideal and real gases: Equations of state, thermodynamic transformations.

4. Industrial sciences:
Automatic Linear, Kinematic, Static.

For more information and to register for the preparation session, please contact me.

Good preparation and success in your studies!

.

Roland

4.88

(85)

The TU Delft Aerospace Engineering Bachelor is one of the most prestigious bachelor programmes the Netherlands has to offer. With it being highly sought-after by students all around the globe, there is a highly competitive selection procedure which needs to be completed to get admitted to this popular degree. A massive part of this admission procedure is the selection exam, consisting of three different tests: Mathematics, Physics and First-Year Material.

As a cum laude graduated Aerospace Engineer at TU Delft, who has also been tutoring since 2017, I have a lot of valuable experience and knowledge of the program to help you out with the right preparation to get in. Moreover, after successfully helping more than 10 students secure a spot over the last three years, I have decided to prepare an additional custom lesson plan for each student, based on the admission syllabus, to ensure an even higher chance of admission.

With my calm and stepwise explanation, weaker topics will be addressed, and your solution procedures will be polished. Each lesson will either be theory, exercise-based or an opportunity to talk about the admission, student life, Delft, what to expect from the study and whether it is the right fit for you.

Marcos

4.88

(85)

80% of my students got accepted in the 2025 exam, I am sure I can help you out in the 2026 exam!

TU Delft is Europe's most prestigious university for aerospace studies, preparing some of the best engineers. However the selection procedure is tough and demanding, and only those prepared have a chance to succeed.

As a TU Delft student, I know from first hand how stressfull this process is, and can therefore help you succeed in the preparation of these exams. I have previous experience as a tutor back in high school, helping students improve their grades from Cs to As.

Moreover, I have an extensive knowledge on the subjects tested on these exams, having taken them myself, completed the courses at university with excellent grades and teaching over 10 students for the entrance exam.

Throughout the class, I will use a presentation to explain the main concepts of each exam (Maths, Physics and Aerospace Engineering), focusing on those subjects the student is struggling with most. After this, I will help the student complete some practice excercises, and then assign extra practice to complete on their own time. These exercises will then be reviewed in the following class to ensure the topics have been understood.

I am looking forward to help you in your journey as an aerospace engineer!

Reza

4.88

(85)

This tutoring class is designed to support Mechanical Engineering students in mastering core concepts of thermodynamics. I cover key topics such as the First and Second Laws of Thermodynamics, energy conservation, entropy, thermodynamic cycles (Carnot, Rankine, Otto, Brayton), and the analysis of closed and open systems. Emphasis is placed on clear explanations, worked examples, and strategies for solving complex engineering problems.

Core Thermodynamics topics that I teach include:
• Basic Concepts: Systems (closed, open), properties, processes, and energy forms
• First Law of Thermodynamics: Energy conservation in closed and open systems
• Applications: turbines, compressors, nozzles, heat exchangers
• Properties of Substances: Phase changes, property tables, ideal gas law, P-v-T behavior
• Second Law of Thermodynamics: Heat engines, refrigerators, Carnot cycle, reversibility
• Entropy: Entropy changes, T-s diagrams, irreversibility
• Thermodynamic Cycles: Otto, Diesel, Rankine, Brayton, and vapor-compression cycles

If you have any additional questions before starting the class, please don't hesitate to ask me. I am here to help! :)

Intasar

4.88

(85)

I have graduated with a degree in chemical engineering from the University of Edinburgh, UK. I am also an Erasmus Mundus scholar with a master's in Analytical Chemistry from Uppsala University. Currently, I am pursuing a PhD in physical chemistry.

I have been tutoring since 2012 to fund my education expenses. I formally began tutoring in 2014 as part of my vocational training as a teacher in Ghana, funded by the University of Edinburgh. The formal training has taught me a lot about curriculum development, time management, and fusing my teaching methodology to my students’ needs. I have been tutoring in Physics, Chemistry, and Math, in person and online; the hybrid model has allowed me to reach out and teach students in 8 different countries. I have successful students from these past nine years who have not only commended my work ethic but can also stand testament to my enthusiasm.

My excellent academic career has nurtured in me a natural talent for teaching. My experiences have taught me how to tackle one problem at a time, and I believe that using this approach—paired with my unconventional examples that force students to think outside the box—I can truly provide an excellent understanding and explanation. My teaching methodology is based on two main things: skill development and adaptation. Initially, I create a skeleton of the most suitable methodology tailored to the preferred curriculum, after which, I adapt that lecture to the specific needs of the student based on their knowledge and grasp of the concepts. Second, I like to develop analytical and scientific ability along with knowledge in my students, and for that, I use a combination of resources in the form of worksheets, class tasks, and past papers. Last, I believe in the strong ethic of providing feedback to the parents, so that they are aware of their child’s progress.

Frequently Asked Questions:
Which subject(s) do you teach?
I teach math, mechanics, statistics, chemistry and physics. I also teach biology up to GCSE level.

When are you available? My timetable is quite flexible. I am happy to work weekdays, week evening and weekends.

Which ages and levels do you teach? The majority of my students are between the ages of 10-18, but I also teach college Students. I am also helping foundation and first year university students.

Which qualifications do you prepare your students for? GCSE, o-level, A/S-level, A-level, IB, School entrance exams and SATs

Describe your arrangements for online tutoring? I use Zoom online sessions since it has many tools and features specially designed for interactive and visual learning. I am fully equipped with modern gadgets for e-learning. I use Google drive and docs to share files.

Dr.

4.88

(85)

STEM or STEAM involves learning about:
1. Science
2. Technology
3. Engineering
4. Arts
5. Mathematics
The course is developed to give middle school learners a broad, comprehensive overview of these fields of study. Learners are introduced to career planning, so they become aware of the major course competencies that they need to develop. The careers vary from teaching to space studies.

Magdalene

4.88

(85)

Mini Makers STEM Lab is a hands‐on, online class where young creators explore early engineering, problem‐solving, and imagination using simple materials they already have at home. Each session features a guided STEM project—like paper helicopters, balloon rockets, marshmallow towers, or DIY parachutes—designed to build confidence, fine motor skills, and curiosity.
Kids follow along step‐by‐step on camera, test their creations, make improvements, and share what they built. The focus is on creativity, exploration, and learning through play. This class is warm, encouraging, and perfect for children who love building, experimenting, and making things with their hands.

Tuncay

4.88

(85)

CATIA, SolidWorks, AutoCAD and Mastercam to beginners (new engineers, technicians, and designers), up to advanced levels.
Lessons cover everything in detail—from the basics to advanced techniques—including in-depth program features, best practices, and effective design approaches/ methodologies.

Tailored for: Junior engineers, technicians, industrial designers, and anyone starting or advancing in CAD.
Language of instruction: Available in English
Format: Private one-on-one sessions, online (via Zoom/Teams) or in-person (in the Netherlands), flexible scheduling.
Focus: Practical, project-based learning with real-world examples, tips for efficiency, certification preparation if needed, and industry-standard workflows.

Netsanet

4.88

(85)

About Me
I am a Mechanical Engineer and Researcher holding a Master’s degree from the University of Debrecen. With a background rooted in complex Numerical Analysis and Fluid Flow simulations, I bring a high level of technical precision to my tutoring. I don’t just teach students how to solve a problem; I teach them how to think like engineers. My goal is to bridge the gap between abstract mathematical formulas and their real-world physical applications.
What I Offer
Mechanical Engineering: Specialist support in Fluid Mechanics, Thermodynamics, Statics, and Dynamics.
Advanced Mathematics: From Algebra to Multivariable Calculus and Differential Equations.
English for STEM: Clear, academic instruction in English perfect for international students or those preparing for technical careers abroad.
My Teaching Philosophy
I believe that every complex system can be broken down into simple, logical parts. My sessions are structured, interactive, and tailored to the student’s specific curriculum. Whether you are struggling with a difficult homework assignment or preparing for a rigorous engineering exam, I provide the tools, shortcuts, and confidence you need to excel.
Let’s turn those "impossible" problems into solved ones. Reach out today to schedule your first session!