fluid mechanic, thermodynamic, mechanic of material, static, machine design, HVAC, Hydraulic, Heat Transfer

From 29 € /h

Classes that cover different engineering aspects: Structural and Energy.
Can provide support and help in these subjects involving different modules. These are basic courses for engineering and especially Mechanical Engineering.
Can provide different resources and problems and explain the solving method and use of the software.

Extra information

Bring laptop, course, pen and paper

Location

Online from Lebanon

About Me

Mechanical Engineer.
Passionate about innovation and design.
Engineering is my life.
I aim to help students discover their skills and potentials. I believe everyone has an inner strength in the area he likes, but some may need a push or orientation to guide them through a straight and clear methodology so they can find their potentials hidden within and reveal their skills.
I have been teaching and helping students for two years. I helped students achieve good grades and pass courses they did not understand.
The way I use to work is credibility and dedication. I am committed to deliver good teaching service to students, sound and clear.
I work to help them achieve good grades. This is only done when students get full command of course.

Education

Master of Mechanical Engineering - American University of Beirut
Multidisciplinary engineering courses ranging from general engineering courses (Calculus and physics) to specific Mechanical Engineering courses (Thermodynamic and fluid mechanic and static and mechanic of materials and heat transfer and hydraulic)

Experience / Qualifications

3 years private engineering tutor
Taught different materials of engineering and high school (Math and physics) and engineering subjects

Age

Children (7-12 years old)

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

The class is taught in

English

French

Arabic

Skills

Mechanical engineering

Structural engineering

Industrial engineering

Availability of a typical week

(GMT -05:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Autodesk Inventor, design, assembly and part model

29 € /h

CAD software from beginner to professional.
This software used to model any 3D body, or to assemble and simulate any 3D machine. Also can be used to generate a technical drawing of any machine with parts.
It is a vital tool for engineer and any designer.

Solidworks, part modelling, simulation, machine design

29 € /h

A powerful CAD tool used to model 3D body and make machine design and part modeling. Used to simulate a machine, design a machine, make a technical drawing.
Important tools for the job market, used especially by a mechanical engineer but is vital for all engineering.
Wide software that covers also routing (electrical module), piping, and simulation

Reza

4.64

(25)

I hold a PhD in Mechanical Engineering and currently, I am working as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).

I have extensive experience in teaching various Mechanical design packages, including LS-DYNA, ANSYS, APDL programming, ABAQUS, MATLAB, SolidWorks, Cura, and Symbolic MATLAB.

Some of the finite element modeling and numerical simulations I have worked on include:
- Multiscale finite element modeling for fatigue crack propagation in porous materials.
- Analysis of multiple-layer sandwich structures' resistance to bird-strike impact [Read paper].
- Investigation of debonding propagation in aluminum and glass/epoxy composite joints under fatigue loading using Fracture Mechanics principles.
- Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials.
- Study of the effect of material type, stacking sequence, and impact location on pedestrian head injury in collisions.

If you have any additional questions before starting the class, please don't hesitate to ask me. I am here to help! :)

Anh

4.64

(25)

If you're facing resit exams in engineering and want to make sure you succeed, I’m here to support you. These tailored tutoring sessions are designed specifically to help you overcome challenges, address any gaps in understanding, and reinforce the core principles of your engineering subjects. Together, we’ll revisit key concepts and solidify your foundation so you feel confident tackling future challenges.

Whether you're studying:
• Aerospace Engineering
• Aeronautical Engineering
• Mechanical Engineering
• Electrical Engineering
• other types of Engineering

You’ll build the knowledge and confidence needed to excel in your resit exams and beyond.

Contact me now for availability, and let's schedule your first session soon. I look forward to working with you!
__________________________________________________________________________________

I'm actively supporting students from top universities worldwide, including:

UK:
• Imperial College London (+ Business School) (ICL)
• University College London (UCL)
• King’s College London (KCL)

The Netherlands:
• Delft University of Technology (TUDelft)
• University of Amsterdam (UvA)
• University of Groningen (RUG)

Switzerland:
• ETH Zurich - Swiss Federal Institute of Technology

Australia:
• Queensland University of Technology (QUT)
• University of Queensland (UQ)
• Griffith University
__________________________________________________________________________________

My name is Anh, and I was born and raised in the U.K. With over 10 years of international experience tutoring Maths, Sciences, and Engineering from Middle School to University Level, I’ve supported over 80 students worldwide in unlocking their full potential.

I have a fun, ambitious, and outgoing personality, and I’m passionate about music, cooking, and trying new things. In my tutoring and mentoring, I am patient, adaptable, and committed to meeting the unique needs of each student.

I work as an Engineering Specialist/Consultant, holding:
• Master’s degree in Aeronautical Engineering from Imperial College London,
• AAA* A-Level in Further Maths and Physics,

Having been mentored and tutored myself, I understand the challenges students face. Through my own experiences of overcoming obstacles and achieving success, I’m passionate about helping others do the same. Let’s work together to ensure you reach your full potential, both academically and personally!

Youssef

4.64

(25)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Abdeer

4.64

(25)

Doctor and graduate in mechanical engineering, I give private lessons at the following level:
* Kinematic Model Course (direct or inverse)
* Dynamic Model Course (direct or reverse)
* Static Model Course (direct or inverse)
* Course Planning the trajectory
* Robot Control Course
* Programming course on Matlab or RoboStudio.

Francisco

4.64

(25)

With 7+ years' experience in education, I have coached over 50 students to improve their academic results and boost their confidence in math and physics.

My tutoring services always include a personalized plan for each student. This plan is established during the first session where I like to meet the student, better understand their difficulties and get to know their schedule.

In the first session, we will:

- Get to know each other.
- Understand the student's strengths and identify areas for improvement.
- Understand the student's needs and difficulties.
- Get to know the student's schedule.
- Create a tutoring plan

Typically, sessions take place as follows:
i. Theoretical review of complex concepts in simple terms
ii. Tips for solving problems
iii. Abundance of exercises from my databases (exams, exercises)

If you are interested in my services, please provide the following information when contacting me:

- School system (French Bac, Matu, IB, A-levels)
- Location of tutoring (or video tutoring if applicable)
- Number of sessions per week and preferred days and times of the week (this can also be discussed after the first session, if you prefer)

Check out my profile if you want to know more about me :)

See you soon,
Francisco

Mohamed

4.64

(25)

Hi,
I offer courses in mathematics, physics, as well as mechanical engineering courses for all levels (high school and university). As an engineer with a doctorate in mechanical engineering, I have a solid experience in teaching and I am passionate about supporting pupils and students towards success.

Whether you are looking for academic support, exam preparation, or to deepen your knowledge in these subjects, I am here to help you with teaching methods adapted to your needs.

Feel free to contact me for more information !

Yassmine

4.64

(25)

As a mechanical engineer, I offer tutoring in mathematics, physics and mechanical engineering, adapting each session to the specific needs of the student. My goal is to make these subjects clear and accessible while promoting understanding and practical application of concepts.

Ghada

4.64

(25)

Facility Planning is composed of facility location as a decision for choosing the best location to minimize the total cost of transportation and the other decpline is the location layout and the different improvement of layout to minimize cost

Chrayet

4.64

(25)

This lesson aims to introduce the 5S methodology as a core tool of Lean Manufacturing to improve workplace organization, increase productivity, and enhance safety and quality.
The trainee learns about the five stages of the methodology (sorting, arranging, cleaning, standardizing, and discipline), with practical examples from industrial reality and how to move from theory to practical application within workshops and institutions.
The lesson is aimed at students, engineers, and technicians who wish to gain a solid foundation in continuous improvement and build a culture of discipline and organization.

Yomna

4.64

(25)

A specialized course focusing on compressible flow, essential for aerospace and propulsion.

Topics Covered:

Compressible flow fundamentals
Speed of sound and Mach number
Isentropic flow relations
Normal and oblique shock waves
Nozzles and diffusers

Applications:

Jet engines
Rocket propulsion
High-speed aerodynamics

Lyne

4.64

(25)

Overview
Practical lessons covering core and cutting-edge automotive systems, for students, technicians, enthusiasts, and industry professionals.

Key Topics

-Engineering maths

- Engine mechanics, powertrains and chassis design

- Electrical/electronics, hybrid/electric tech

- CAD design, materials and manufacturing

- Diagnostics, maintenance and performance tuning

- Autonomous vehicles, alternative fuels and connected cars

Jammal

4.64

(25)

Hi, my name is Jammal and I give math and physics lessons for all school levels.
I'm an aerospace engineer and I'm training to be an airline pilot :)

Mohammed

4.64

(25)

Comprehensive explanations of all chapters of Fluid Mechanics for all colleges and institutes in Kuwait, scholarship students, and others, including summaries, explanations, solved examples, and past exams, linking theory with practice. Also included are explanatory videos for all chapters: Fluid Mechanics 1, Fluid Mechanics 2, Hydraulics, and Turbomechanics.

Arthur

4.64

(25)

I offer tailored support, adapted to the level, objectives and pace of each student.
Whether it's to fill gaps in knowledge, prepare for a test, train effectively before an exam, or work on long-term preparation for university exams, each session is structured and targeted.
The goal: to make concrete progress, gain method and confidence, with clear, effective and truly personalized teaching.

Valentin

4.64

(25)

Holder of an engineering degree in mechatronics from the Mines d'Alès school.
Passionate about technology and knowledge sharing, I am committed to sharing my professional expertise to help students succeed. My career path allows me to provide a concrete and structured perspective on engineering, while building a relationship of trust and support with my students to help them progress.

I offer practical support in Engineering Sciences, from middle school to preparatory classes, drawing on my professional expertise to bring theory to life. My method emphasizes understanding through technical examples and real-world problem-solving, moving beyond the traditional classroom setting, to help you achieve your goals of success in exams or competitive entrance exams.