Technology (Technical drawing, information chain, energy chain.........)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics. Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects. Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies. Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life. Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life. Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently. Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School. I master the teaching of analog and digital electronics, covering components, integrated circuits and embedded systems. - Fundamentals of electronics: Definitions, basic concepts, Kirchhoff's laws. - Electronic components: Resistors, capacitors, inductors, diodes. - Operational amplifiers: Operation, characteristics, applications. - Basic analog circuits: Amplifiers, filters, oscillators. - Introduction to digital electronics: Binary logic, logic gates, combinational circuits. - Numbering systems: Conversion between bases, adders, subtractors. - Transistors: Bipolar transistors, field effect transistors, characteristics, applications. - Transistor amplifiers: Configuration, gain calculations, stability. - Analog integrated circuits: Voltage regulators, A/D and D/A converters. - Sequential digital systems: Flip-flops, registers, counters. - Microcontrollers and microprocessors: Architecture, basic programming, interfaces. - Analysis of electronic circuits: Frequency and time analysis methods. - Advanced analog circuits: Differential amplifiers, power amplifiers, active filters. - Modulation and demodulation techniques: AM, FM, PM. - Embedded systems: Design of real-time systems, communication between peripherals. - Test and measurement techniques: Oscilloscope, spectrum analyzer, signal generators. -

I am a second-year industrial engineering student with a strong academic background in mathematics, physics, and engineering sciences. I offer personalized tutoring adapted to each student’s needs — whether it’s catching up, deepening understanding, or preparing for exams. I can teach in Arabic, French, or English, depending on your preference, and I make sure each lesson is practical, interactive, and motivating. Subjects: Mathematics (all levels) Physics (mechanics, electricity, thermodynamics) Technical drawing & engineering basics English, French, or Arabic language practice

In these tailored Engineering sessions, I combine tutoring with mentoring to guide your technical understanding and foster your growth in key engineering concepts. My approach adapts to your natural learning style, ensuring that each lesson is intuitive, engaging, and effective. With over 10 years of experience in Aerospace, Mechanical, and Electrical engineering, I bring a wealth of both academic and real-world expertise to our sessions. I’ll share insights from the Aerospace, Maritime, and Aviation industries to help you develop practical skills and problem-solving techniques, tailored to your needs. Whether you're studying: • Aerospace Engineering • Aeronautical Engineering • Mechanical Engineering • Electrical Engineering • other types of Engineering Or need help with areas like control systems or data analysis, I’m here to guide you through any engineering challenge. My lessons are customized to fit your learning style and academic goals, ensuring you leave each session feeling confident and prepared. Contact me now for availability, and let's schedule your first session soon. I look forward to working with you! __________________________________________________________________________________ I'm actively supporting students from top universities worldwide, including: UK: • Imperial College London (+ Business School) (ICL) • University College London (UCL) • King’s College London (KCL) The Netherlands: • Delft University of Technology (TUDelft) • University of Amsterdam (UvA) • University of Groningen (RUG) Switzerland: • ETH Zurich - Swiss Federal Institute of Technology Australia: • Queensland University of Technology (QUT) • University of Queensland (UQ) • Griffith University __________________________________________________________________________________ My name is Anh, and I was born and raised in the U.K. With over 10 years of international experience tutoring Maths, Sciences, and Engineering from Middle School to University Level, I’ve supported over 80 students worldwide in unlocking their full potential. I have a fun, ambitious, and outgoing personality, and I’m passionate about music, cooking, and trying new things. In my tutoring and mentoring, I am patient, adaptable, and committed to meeting the unique needs of each student. I work as an Engineering Specialist/Consultant, holding: • Master’s degree in Aeronautical Engineering from Imperial College London, • AAA* A-Level in Further Maths and Physics, Having been mentored and tutored myself, I understand the challenges students face. Through my own experiences of overcoming obstacles and achieving success, I’m passionate about helping others do the same. Let’s work together to ensure you reach your full potential, both academically and personally!

Are you in preparatory classes (CPGE) and want to excel in Engineering Sciences? I offer personalized courses to support you in key subjects, with a pedagogy adapted to your academic needs and your objectives. Modules taught: 🔧 Strength of Materials (RDM): Analysis of stresses, deformations and dimensioning of structures. ⚙️ Elasticity: Study of elastic solids and resolution of stress and deformation problems. 🌊 Fluid and solid mechanics: Fundamental concepts and applications in the field of fluid structures and systems. 💻 Industrial computing: Programming, automation and simulation of industrial systems. Highlights of my courses: ✔️ Methodical and structured approach adapted to the CPGE program. ✔️ Typical exercises and solving complex problems. ✔️ Specific preparation for competitive examinations for major engineering schools. ✔️ Clear and detailed teaching materials provided in each session. For who ? 🎓 Students in scientific preparatory classes (CPGE). 🏫 Students and professionals looking to strengthen their knowledge in SII. Course organization: Format: Individually or in small groups. Modalities: Online or in person depending on your preferences. Flexibility: Classes tailored to your schedule.

Teaching engineering college subjects, physics and mathematics, specifically mechanical engineering, thermodynamics, mechanical design, fluid mechanics, heat transfer, and dynamics. I have taught Qatari students at overseas universities: University of Sunderland, University of Liverpool, University of Brighton and University of Sussex.

I am an associate professor of electrical engineering I offer courses in everything related to the discipline of electrical engineering: CPGE / BTS / DUT / IUT / DTS / UNIVERSITY / Technical high school ARCHITECTURE OF A PROGRAMMED SYSTEM INTERNAL AND EXTERNAL APPEARANCE INPUT/OUTPUT MANAGEMENT timeouts timers, watchdog PIC 16F8X 16F8XX PROGRAMMING INTERRUPTIONS MANAGEMENT ASSEMBLER PROGRAMMING PROGRAMMING IN C MACHINE CONTROL SOFTWARE SIMULATION MPLAB MIKROC ISIS/PROTEUS

I hold a PhD in Mechanical Engineering and currently, I am working as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology). I have extensive experience in teaching various Mechanical design packages, including LS-DYNA, ANSYS, APDL programming, ABAQUS, MATLAB, SolidWorks, Cura, and Symbolic MATLAB. Some of the finite element modeling and numerical simulations I have worked on include: - Multiscale finite element modeling for fatigue crack propagation in porous materials. - Analysis of multiple-layer sandwich structures' resistance to bird-strike impact [Read paper]. - Investigation of debonding propagation in aluminum and glass/epoxy composite joints under fatigue loading using Fracture Mechanics principles. - Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials. - Study of the effect of material type, stacking sequence, and impact location on pedestrian head injury in collisions. If you have any additional questions before starting the class, please don't hesitate to ask me. I am here to help! :)

Discover the world of robotics and electronics through hands-on learning with Arduino. This class is designed for beginners and curious minds who want to build real projects while understanding how sensors, motors, and circuits work. You'll learn to program Arduino step by step and apply concepts in fun, interactive ways. My teaching style is clear, patient, and fully adapted to your pace. Ideal for students, future engineers, or anyone passionate about technology.

Electrical engineering is the foundation of modern technology, powering everything from household appliances to industrial automation. This class is designed to introduce beginners to the core concepts of electrical engineering, making complex topics easy to understand. You will learn about: Basic electrical concepts: Voltage, current, resistance, and power Circuit analysis techniques: Ohm’s Law, Kirchhoff’s Laws, and network theorems Introduction to electronic components: Resistors, capacitors, diodes, and transistors etc Hands-on projects using breadboards and simulation software By the end of this course, students will have a strong understanding of electrical fundamentals and be able to apply them in real-world applications, including Arduino and Raspberry Pi projects.

Hi, I offer courses in mathematics, physics, as well as mechanical engineering courses for all levels (high school and university). As an engineer with a doctorate in mechanical engineering, I have a solid experience in teaching and I am passionate about supporting pupils and students towards success. Whether you are looking for academic support, exam preparation, or to deepen your knowledge in these subjects, I am here to help you with teaching methods adapted to your needs. Feel free to contact me for more information !

I am a native english speaking academic with more than 20 years of teaching experience in the UK, Spain and Turkey. Teaching university electrical electronic engineering, physics and maths also at high school level. Also, i teach English for academic education abroad.

More than 10 years of experience teaching inside the Emirates for students of Colleges of Technology, Abu Dhabi University, Baynouna Institute and Emirates University. In addition to the work of projects for students and solutions for reports. The possibility of detailed explanation in an easy and simple way. Items that can be explained: Electrical and electronic circuits 1 and 2 - Digital circuits - Mathematics such as 1, 2 and 3 - Physics - Measurements - Machines - Engineering economics - Matlab - Communication - control - DSP - signals & systems - PLC All subjects of electrical engineering department Electronics I,II, Advanced Electronics, . Electrical and Electronics circuits 1 and 2 - Digital circuits -Digital logic- Mathematics with all its sections - Physics - Measurements -Instrumentation- Matlab - Analog and Digital Communications - DSP (Digital signal Processing)- signals and systems -Logic design- Control - economic Engineering - networks- PLC - micro. All electrical engineering subjects related

..................................... (satisfied or refunded)........ ....... Electrical engineering expert PhD student in electrical engineering and renewable energies engineer in electrical engineering and industrial computing I offer home schooling courses to deal with the difficulties encountered by students during their schooling, These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams. ===Automatic (Servo-control and automatism regulation (discrete, continuous)======== ===Electrical engineering (electrical machines) and power electronics (inverter rectifier)======= ===Continuous and sampled signal processing================= ===VHDL programming, microcontroller and microprocessor (intel, ARM)============ ===High frequency electronics (transistor, diode, AOP, noise)============ ===Propagation of electromagnetic waves and antennas======== ===Analog and digital electronics (filters, flip-flops, sysml,Grafcet,amplifier)===== === Realization of electrical projects ===MATLAB ARDUINO Proteus ISIS === Renewable energies COURSE OBJECTIVES AND PEDAGOGICAL APPROACH Resumption and deepening of fundamental concepts through exercises with course reminders. Put the student in a situation of questioning and research. Respond to individual issues and questions Exercise training in order to achieve real mastery of the content. Learn to build theoretical reasoning from observable facts or hypotheses. Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background) This pedagogical approach is effective since it has often led me to interesting results with my students.

• Empowered engineering and STEM students through personalized, high-impact tutoring in mechatronics, electronics, robotics, and applied mathematics. • Translated complex concepts into real-world problem-solving techniques, boosting student performance and technical confidence. • Mentored students on academic projects involving CAD (Creo/SolidWorks), embedded systems, and MATLAB/Simulink applications. • Developed customized learning paths, resulting in improved grades and stronger conceptual foundations across multiple technical disciplines. • Built a reputation for making engineering make sense—combining technical depth with engaging instruction.