Electrical, Electronic and communication Engineering Class

From 20.1 € /h

I only give online classes or help in assignments or projects.
but doing exams or assignments or projects with my own without any efforts from you is not allowed.

Hello Everyone, I am a postgraduate student in electrical engineering. I have bachelor of Engineering in Electrical and communication engineering. I've been teaching electrical engineering courses for 2 years.
The courses I am teaching are
1-Electric circuits
2-signal and systems
3-electromagnetic fields
4-electromagnetic waves
5-transmission line theory
6-microwave engineering
7-antennas and propagation of radio waves
Also I can give tutorials on simulation softwares dedicated for these courses. the simulations softwares are MATLAB, Multisim, ADS, Ansys Electronics, CST.
I have my digital pen and my online whiteboard, so I can share my white board online.
I also have, 3D scientific visualization experience. So, I have 3D visualization for the electromagnetic concepts.
at the end, I'm happy to connect and help you and I hope you to fully understand these courses and do well in their exams.

Extra information

Online teaching only

Location

Online from Egypt

Age

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

30 minutes

45 minutes

60 minutes

90 minutes

120 minutes

The class is taught in

English

Arabic

Skills

Electromagnetism

Electronic circuits

Electrical engineering

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

4.85

(13)

I offer teaching courses in electrical engineering and electronics (private lessons or holiday courses) to deal with the difficulties encountered by students during their schooling, as part of an individual follow-up that respects the rhythm specific to each.
These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Matías

4.85

(13)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Marko

4.85

(13)

✅ Experienced teacher offering private online physics lessons for all levels.
✅ Fully dedicated and focused on student progress.
✅ Very patient, systematic, and organized.

I teach a wide range of topics in physics, including but not limited to:

5- Physical quantities and units
- Kinematics (types of motion, kinematics of point particles and rigid bodies)
- Dynamics (frictional and inertial forces, Newton's laws)
- Laws of conservation (energy, momentum)
- Theory of collision processes
- Inertial and non-inertial reference frames
- Potential and kinetic energy
- Gravitation and gravity fields
- Oscillatory and wave motions
- Harmonic oscillator
- Doppler effect
- Standing waves
- Sound waves and physical characteristics of sound
- Surface tension and capillary phenomena
- Fluid mechanics
- Temperature and heat
- Calorimetry
- Phase transitions
- Principles of thermodynamics
- Electrostatics
- Electromagnetism
- Kirchhoff's laws
- Electronic circuits
- Dielectrics
- Optics
... and much more.

If there are specific topics you would like to focus on or if you have any questions, feel free to let me know. I am here to help you deepen your understanding of physics.

Youssef

4.85

(13)

Associate professor in engineering sciences, 5 years of professional experience at all levels, college, high school, university, preparatory classes, engineering schools. Gives courses from college to university, preparation for exams, revisions, oral preparation, development of study methodologies.

Webcam lessons

Hossam

4.85

(13)

More than 10 years of experience teaching inside the Emirates for students of Colleges of Technology, Abu Dhabi University, Baynouna Institute and Emirates University. In addition to the work of projects for students and solutions for reports. The possibility of detailed explanation in an easy and simple way.

Items that can be explained:

Electrical and electronic circuits 1 and 2 - Digital circuits - Mathematics such as 1, 2 and 3 - Physics - Measurements - Machines - Engineering economics - Matlab - Communication - control - DSP - signals & systems - PLC

All subjects of electrical engineering department
Electronics I,II, Advanced Electronics, . Electrical and Electronics circuits 1 and 2 - Digital circuits
-Digital logic- Mathematics with all its sections - Physics - Measurements -Instrumentation- Matlab - Analog and Digital Communications - DSP (Digital signal Processing)- signals and systems -Logic design- Control - economic Engineering - networks- PLC - micro.

All electrical engineering subjects related

Arianit

4.85

(13)

Electrical engineering forms the backbone of today's technology. From the distribution of electricity worldwide to the implementation of microcircuits, electrical engineering describes and provides the fundamentals of all principles pertaining to electronics, telecommunications, power systems, renewable energy, machines and mechatronics, etc. Having graduated as an Electrical Engineer I am offering Electrical Engineering I and II tutorials for beginner students at the University of Applied Sciences Upper Austria. I have experience in elaborating and describing the following thematics which are often problematic for students who seek a degree in Electronics Engineering, Computer Engineering, Telecommunication Engineering, and Electrical Engineering:
•Electrical Engineering Basics
•Conductor, Isolator, and Semiconductor Physics
•AC Passive components: Inductors, Capacitors and Resistors
•DC Circuit Analysis (Thevenin, Kirchhoff and Helmholtz approaches)
•Three-phase systems
•Diodes and the PN Junction
•Transistor Physics: BJT/IGBT/MOSFET
•Operational Amplifiers
•Electronic Circuitry (Buffers, Signal Amplifiers, etc)
•Transformer and Electromagnetics Basics

Anh

4.85

(13)

If you're facing resit exams in engineering and want to make sure you succeed, I’m here to support you. These tailored tutoring sessions are designed specifically to help you overcome challenges, address any gaps in understanding, and reinforce the core principles of your engineering subjects. Together, we’ll revisit key concepts and solidify your foundation so you feel confident tackling future challenges.

Whether you're studying:
• Aerospace Engineering
• Aeronautical Engineering
• Mechanical Engineering
• Electrical Engineering
• other types of Engineering

You’ll build the knowledge and confidence needed to excel in your resit exams and beyond.

Contact me now for availability, and let's schedule your first session soon. I look forward to working with you!
__________________________________________________________________________________

I'm actively supporting students from top universities worldwide, including:

UK:
• Imperial College London (+ Business School) (ICL)
• University College London (UCL)
• King’s College London (KCL)

The Netherlands:
• Delft University of Technology (TUDelft)
• University of Amsterdam (UvA)
• University of Groningen (RUG)

Switzerland:
• ETH Zurich - Swiss Federal Institute of Technology

Australia:
• Queensland University of Technology (QUT)
• University of Queensland (UQ)
• Griffith University
__________________________________________________________________________________

My name is Anh, and I was born and raised in the U.K. With over 10 years of international experience tutoring Maths, Sciences, and Engineering from Middle School to University Level, I’ve supported over 80 students worldwide in unlocking their full potential.

I have a fun, ambitious, and outgoing personality, and I’m passionate about music, cooking, and trying new things. In my tutoring and mentoring, I am patient, adaptable, and committed to meeting the unique needs of each student.

I work as an Engineering Specialist/Consultant, holding:
• Master’s degree in Aeronautical Engineering from Imperial College London,
• AAA* A-Level in Further Maths and Physics,

Having been mentored and tutored myself, I understand the challenges students face. Through my own experiences of overcoming obstacles and achieving success, I’m passionate about helping others do the same. Let’s work together to ensure you reach your full potential, both academically and personally!

Ahmed

4.85

(13)

Learn from the ground up, starting with the fundamentals of electronics and various electronic components.
Understand the necessary electrical connections to design and program smart home and Internet of Things (IoT) circuits.
Explore what Arduino is and the programming language used to control it.
Discover how to create programs to control home devices using a mobile phone.

Training includes working with real Arduino circuits as well as using simulation software.
I offer practical and simplified training that starts from the fundamentals of electronics and progresses to designing and programming smart home and Internet of Things (IoT) systems. The course includes clear theoretical explanations and hands-on applications using real circuits and digital simulation software.

Course Content

Electronics Fundamentals

Introduction to essential electronic components: resistors, capacitors, diodes, transistors, and sensors

Understanding proper electrical connections

Reading electronic circuits and using the breadboard

What is Arduino and How Do We Program It?

Introduction to Arduino boards

Explanation of the C/C++ programming language used for Arduino

How to upload code and test projects step by step

Designing and Programming Smart Home Circuits

Connecting sensors and smart switches

Controlling lighting and household devices

Designing a system to control the home using a mobile phone

Introduction to IoT and integrating it with home automation

Mobile Phone Home Control

Creating simple control interfaces

Connecting using Wi-Fi or Bluetooth

Turning devices on and off and monitoring sensors remotely

Practical Training

Working with real Arduino circuits

Using simulation software such as Tinkercad and Proteus

Building ready-to-use practical projects

Who Is This Course For?

Beginners in electronics

Students interested in learning Arduino programming

Anyone who wants to build a smart home project

Anyone looking to understand how electronics work in a simple and practical way

David

4.85

(13)

Embark on a journey of in-depth exploration into the fascinating realms of physics with a seasoned educator. As a dedicated and passionate tutor, I hold a Ph.D. in theoretical Physics, bringing a wealth of expertise to guide you through the intricacies of Quantum Mechanics, Newtonian Mechanics, Lagrangian Mechanics, Electromagnetism, Statistical Physics, Thermodynamics, and Special Relativity, among many other subjects.

Join me in unraveling the mysteries of the universe and mastering the fundamental principles that govern the world around us.

Yassine

4.85

(13)

Discover the world of robotics, electronics, and programming with a course designed for technology and innovation enthusiasts. Whether you are a beginner or already have some basics, this course will guide you through the fundamentals, with a hands-on approach to designing your own projects. You will learn how to use electronic components, program microcontrollers, and assemble robots to perform autonomous tasks.

Ali

4.85

(13)

I offer one-to-one Electronics and Electrical Engineering tuition for university students, college students, and serious learners. Lessons are available online or in person around Birmingham.

What I cover:

Circuit analysis (DC and AC, Kirchhoff's laws, Thevenin / Norton, op-amps)
Digital electronics and logic design
Signals and Systems, Digital Signal Processing (DSP)
Control systems (Laplace, transfer functions, stability, frequency response)
Embedded systems and microcontroller basics
Power electronics fundamentals
University coursework, lab reports, dissertation and project support
Exam preparation for engineering modules

How I teach:
I start by figuring out exactly which concepts are tripping you up — most students are stuck on one or two key ideas, and once those click, everything else falls into place. I use plenty of worked examples, real circuit diagrams, and clear explanations of the maths behind each topic. For project and dissertation work, I can help you plan, debug, and present your work properly.
If you're struggling with an engineering module, preparing for exams, or working on a final-year project, I can help you turn confusion into confidence.

Fatima

4.85

(13)

🚀 Do you finally want to understand electricity, electronics, or automation without stress? You've come to the right place!

👩‍🏫 I'm an electrical and renewable energy engineer and an experienced teacher. I'll guide you step by step, even if you're starting from scratch.

💡 My courses allow you to:
Understanding the basics of electricity

Master electronic circuits, control systems, and automatons

Learn at your own pace with concrete examples, diagrams, simulations and guided exercises

🧰 Content suitable for:
High school students / students in BTS, DUT, license, preparatory classes, engineering schools......

Students in retraining or self-taught

International students (courses available in French or English)

✅ What sets me apart:
Clear, progressive and caring approach

Support after the course if needed (questions, corrections, etc.)

Online or face-to-face courses

Taiwo

4.85

(13)

This online mathematics class helps students build a deep understanding of concepts, strengthen problem-solving skills, and improve performance in school and international exams. I have supported students across various educational systems, helping them overcome learning gaps and develop confidence in math.

Lessons focus on understanding why methods work, not just memorizing formulas. Students learn step-by-step approaches, logical reasoning, and how to clearly explain their solutions—an essential skill for higher-level mathematics.

I support learners studying under curricula such as Cambridge, IGCSE, GCSE, IB (MYP & DP), A-Level, and other international programs. Whether a student needs help catching up, preparing for exams, or aiming for higher achievement, lessons are tailored to their pace and goals.

With structured practice, guided problem-solving, and exam-focused strategies, students gain both clarity and confidence.

Jose

4.85

(13)

This class provides an introduction to the fundamental principles of electrical and electronic engineering with emphasis on control systems and their industrial applications. Topics include basic electrical circuits, electronic components, signal analysis, and the modeling and control of dynamic systems. Students will explore how electrical and electronic technologies are used to design, analyze, and regulate modern engineering systems, including automation, power systems, and industrial processes. The course integrates theoretical concepts with practical examples to develop analytical and problem-solving skills relevant to engineering practice.

Brayden

4.85

(13)

I offer a comprehensive, high-impact approach to mastering the laws of the universe.

My course is specifically designed to connect abstract formulas with a deep conceptual understanding. We will delve into:
- Classical Mechanics and Dynamics: We will master Newton's laws, kinematics and conservation of energy with competitive-level problem-solving techniques.
- Waves and Optics: We will understand the nature of oscillations, sound and light, from simple harmonic motion to the interference of complex waves.
- Thermodynamics: We will explore heat transfer, the laws of thermodynamics, and their crucial applications in engineering and aerospace.
- Electromagnetism: A rigorous approach to electric fields, circuits, magnetism, and Maxwell's equations.