Circuit Theory Analysis, Basic and Advanced topics in Electronic

From 5.65 Fr /h

I have 4 years of experience teaching
you will learn the basics of circuit theory analysis.
operation of semiconductors and their related devices such as Diode, MOSFET, and BJT, and their related applications.
verify your study with CAD tools such as Multisim, Altium, Proteus, ORCAD, and LT Spice.
teaching advanced Courses in Mixed Analog and Digital IC design using Cadence Virtuoso tools and teaching Layout with DRC, LVS, and PEX.
previous experience in Cadence are Design high-Speed Current steering DAC, Flash ADC, and low noise Biopotential Amplifier Using the chopper technique.

Location

Online from Egypt

About Me

I have good experience of three years of teaching Circuit Theory and Basic electronic Devices such as Diode, MOSFET, BJT, Op-Amp, Differential pair, Current Mirror, and Oscillator topics such as Harmonic oscillator and multivibrator. Also related topics such that Feedback, frequency response, and noise analysis.

I have good experience in CAD tools such that Altium, protus, Multisim, OR CAD, and LT spice.
I graduated from the Department of communication and Electronics and Mastered analog and Digital (Mixed) IC circuits and Master Cadence Virtuoso software and VLSI Layout.

Education

graduated from telecomunication and electronics department.
Master degree in Mixed analog and Digital IC Design (Design High speed Current Steering DAC)
GPA: 3.2

Experience / Qualifications

Experience of 3 years in online teaching of the following courses:
Circuit Theory.
Electronics I,II.
Logic Gates.
Analog IC.
DSP.
Analog Communication.

Age

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

90 minutes

120 minutes

The class is taught in

English

Arabic

Skills

Electronic circuits

Telecommunications

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

François

4.38

(8)

Civil engineer, with extensive experience in individual training, gives:

>Maths, physics, chemistry, statistics, algebra, geometry, analysis
>Electricity, automatic, electronic

For secondary level up to master.
I illustrate the theory on the basis of concrete examples thanks to my experience in the business environment.

Matías

4.38

(8)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Monther

4.38

(8)

Teaching electrical and electronic engineering subjects through examples and practical explanations
Examples of subjects that I can teach in Arabic and English:
Microcontroller - Arduino - Embedded System - Electrical Machine - Power Electronics - Digital System Design - Digital Circuit - Programming in C
And some other core subjects for electrical and electronic engineering major

I am able to teach the Electrical and Electronics Engineering Subject with practical examples, some courses that I can teach:
Microcontroller - Embedded System - Electrical Machine - Power Electronics - Digital System Design - Digital Circuit - Programming in C.

Marko

4.38

(8)

✅ Experienced teacher offering private online physics lessons for all levels.
✅ Fully dedicated and focused on student progress.
✅ Very patient, systematic, and organized.

I teach a wide range of topics in physics, including but not limited to:

5- Physical quantities and units
- Kinematics (types of motion, kinematics of point particles and rigid bodies)
- Dynamics (frictional and inertial forces, Newton's laws)
- Laws of conservation (energy, momentum)
- Theory of collision processes
- Inertial and non-inertial reference frames
- Potential and kinetic energy
- Gravitation and gravity fields
- Oscillatory and wave motions
- Harmonic oscillator
- Doppler effect
- Standing waves
- Sound waves and physical characteristics of sound
- Surface tension and capillary phenomena
- Fluid mechanics
- Temperature and heat
- Calorimetry
- Phase transitions
- Principles of thermodynamics
- Electrostatics
- Electromagnetism
- Kirchhoff's laws
- Electronic circuits
- Dielectrics
- Optics
... and much more.

If there are specific topics you would like to focus on or if you have any questions, feel free to let me know. I am here to help you deepen your understanding of physics.

Hossam

4.38

(8)

More than 10 years of experience teaching inside the Emirates for students of Colleges of Technology, Abu Dhabi University, Baynouna Institute and Emirates University. In addition to the work of projects for students and solutions for reports. The possibility of detailed explanation in an easy and simple way.

Items that can be explained:

Electrical and electronic circuits 1 and 2 - Digital circuits - Mathematics such as 1, 2 and 3 - Physics - Measurements - Machines - Engineering economics - Matlab - Communication - control - DSP - signals & systems - PLC

All subjects of electrical engineering department
Electronics I,II, Advanced Electronics, . Electrical and Electronics circuits 1 and 2 - Digital circuits
-Digital logic- Mathematics with all its sections - Physics - Measurements -Instrumentation- Matlab - Analog and Digital Communications - DSP (Digital signal Processing)- signals and systems -Logic design- Control - economic Engineering - networks- PLC - micro.

All electrical engineering subjects related

Dr.

4.38

(8)

This course serves as your comprehensive guide to understanding and harnessing the power of IoT and Arduino to create innovative and intelligent solutions. The Internet of Things has emerged as a game-changing technology that has the potential to transform industries, revolutionize everyday life, and unlock endless possibilities. By connecting physical objects and devices to the internet, IoT enables seamless communication, data exchange, and intelligent decision-making.

4.38

(8)

Hello, I am a doctor in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer support courses in the subjects of engineering sciences (electronics, automation, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism (propagation of high frequency waves)
Automatic (continuous, sampled)
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python,VHDL
PIC Microprocessor and Microcontroller
Signal processing and data acquisition
Engineering Sciences

These courses allow the student to get up to speed and regain confidence in all scientific subjects, just as they prepare him effectively for the Baccalaureate, the Preparatory Classes or various examinations of the engineering classes.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Youssef

4.38

(8)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Abdelali

4.38

(8)

Hello, I am an electrical and electronic engineer with extensive experience as a professor in higher education in engineering sciences and electrical engineering, as well as a rich experience as an embedded systems engineer, in EE architecture, ADAS, Testing and validation in the automotive sector.

I propose for the students of the higher cycle a supervision and an accompaniment until the realization of their projects or mini projects in electronics, signal processing, regulation and enslavement... using languages and software such as: Matlab / Simulink, Python, LabVIEW, ISIS Proteus, Arduino...

I also give courses and training in:

Embedded systems, ADAS systems and automotive engineering
Electrical and electronic circuits
Automatic
Industrial regulation
Signal processing
C Programming, Assembler, PIC, Arduino
PIC microcontroller
Microprocessor

Ahmed

4.38

(8)

Learn from the ground up, starting with the fundamentals of electronics and various electronic components.
Understand the necessary electrical connections to design and program smart home and Internet of Things (IoT) circuits.
Explore what Arduino is and the programming language used to control it.
Discover how to create programs to control home devices using a mobile phone.

Training includes working with real Arduino circuits as well as using simulation software.
I offer practical and simplified training that starts from the fundamentals of electronics and progresses to designing and programming smart home and Internet of Things (IoT) systems. The course includes clear theoretical explanations and hands-on applications using real circuits and digital simulation software.

Course Content

Electronics Fundamentals

Introduction to essential electronic components: resistors, capacitors, diodes, transistors, and sensors

Understanding proper electrical connections

Reading electronic circuits and using the breadboard

What is Arduino and How Do We Program It?

Introduction to Arduino boards

Explanation of the C/C++ programming language used for Arduino

How to upload code and test projects step by step

Designing and Programming Smart Home Circuits

Connecting sensors and smart switches

Controlling lighting and household devices

Designing a system to control the home using a mobile phone

Introduction to IoT and integrating it with home automation

Mobile Phone Home Control

Creating simple control interfaces

Connecting using Wi-Fi or Bluetooth

Turning devices on and off and monitoring sensors remotely

Practical Training

Working with real Arduino circuits

Using simulation software such as Tinkercad and Proteus

Building ready-to-use practical projects

Who Is This Course For?

Beginners in electronics

Students interested in learning Arduino programming

Anyone who wants to build a smart home project

Anyone looking to understand how electronics work in a simple and practical way

Yassine

4.38

(8)

Discover the world of robotics, electronics, and programming with a course designed for technology and innovation enthusiasts. Whether you are a beginner or already have some basics, this course will guide you through the fundamentals, with a hands-on approach to designing your own projects. You will learn how to use electronic components, program microcontrollers, and assemble robots to perform autonomous tasks.

Ossama

4.38

(8)

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School in the following disciplines:

1. Electrical engineering
With extensive expertise in electrical systems, I am able to teach all aspects of electrical engineering, including electrical machines, energy conversion, and electrical networks. My teaching approach emphasizes theoretical understanding and practical applications.

2. Electronics
I am adept at teaching analog and digital electronics, covering components, integrated circuits, and embedded systems. I can impart solid knowledge to train students in current and emerging technologies.

3. Automatic
I offer comprehensive courses in dynamic systems control, whether using conventional (PID) or advanced (nonlinear, real-time) controls. My courses incorporate practical applications tailored to industrial needs.

4. Industrial Computing and Automation
With experience in programming and industrial automation, I can teach topics such as programmable logic controllers, embedded systems, industrial communication protocols, and HMIs. My goal is to equip students to design and optimize complex automated systems.

Ali

4.38

(8)

I offer one-to-one Electronics and Electrical Engineering tuition for university students, college students, and serious learners. Lessons are available online or in person around Birmingham.

What I cover:

Circuit analysis (DC and AC, Kirchhoff's laws, Thevenin / Norton, op-amps)
Digital electronics and logic design
Signals and Systems, Digital Signal Processing (DSP)
Control systems (Laplace, transfer functions, stability, frequency response)
Embedded systems and microcontroller basics
Power electronics fundamentals
University coursework, lab reports, dissertation and project support
Exam preparation for engineering modules

How I teach:
I start by figuring out exactly which concepts are tripping you up — most students are stuck on one or two key ideas, and once those click, everything else falls into place. I use plenty of worked examples, real circuit diagrams, and clear explanations of the maths behind each topic. For project and dissertation work, I can help you plan, debug, and present your work properly.
If you're struggling with an engineering module, preparing for exams, or working on a final-year project, I can help you turn confusion into confidence.

Saul

4.38

(8)

1. Fundamentals of Networks and Systems
Before breaking something, you need to know how it works. In this stage you will learn:
The OSI Model: Understanding how data travels from an application to the physical cable.
Essential protocols: What TCP/IP, DNS, HTTP/S and FTP are and how they work.
Command line: Overcoming the fear of the Linux terminal and the Windows CMD.
2. The Security Triad (CIA)
This is the industry's "Lord's Prayer." A good course will teach you how to protect these three fronts:
Confidentiality: Ensure that only authorized people see the data (Encryption).
Integrity: Ensuring that the information is not altered (Hashing).
Availability: That the systems are active when needed (Mitigation of DoS attacks).
3. Types of Attacks and Threats
This is where the theory gets exciting. You will learn to identify:
Social Engineering: How attackers deceive people (Phishing, Vishing).
Malware: Differences between viruses, Trojans, ransomware and spyware.
Web Vulnerabilities: Basic concepts such as SQL Injection or Cross-Site Scripting (XSS).
4. Defense and Mitigation
It's not all about attack; most of the real work is about protecting:
Using Firewalls and Antivirus: Basic Configuration.
Identity Management: Two-factor authentication (2FA) and biometrics.
Basic cryptography: How public and private keys work.
SIEM Log event management.

Jean-François

4.38

(8)

A course for creators, artists, designers, and... anyone curious! Learn to manipulate and program Arduinos and other control boards, discover the sensor ecosystem, and implement motors, actuators, and lights. Start designing your own interactive systems!