Private lessons in AVIATION, ENGINEERING, ELECTROTECHNICS, TOPOGRAPHY, METEOROLOGY, OCEANOGRAPHY - Paris

Translated by GoogleSee original

Private lessons in AVIATION, ENGINEERING, ELECTROTECHNICS, TOPOGRAPHY, METEOROLOGY, OCEANOGRAPHY

From 25 € /h

I adapt to the profile of each intern or student according to their objective and level.
The goal is not to work endless hours, but to show how to be able to work alone or partially independently in a short time.
It is always a pleasure for me to be recognized in the street 15 years after classes, and to be thanked for having provided a real service to the person concerned.
This activity is a passion of mine that I have been pursuing since I was 16 years old.
I hope to be able to share it with you to prepare effectively, by significantly reducing your legitimate apprehension of exams.

Location

Online from France

About Me

Engineer from the National School of Civil Aviation (ENAC Toulouse) who trains pilots and air traffic controllers. Trained as a private pilot (PPL).
Teaches thermodynamics, fluid mechanics, turbojet technology, avionics, meteorology, oceanography, topography.
Then I became a trainer in air traffic control, and offer courses at all levels in mathematics, physics, chemistry, electronics, electrical engineering, and technology.
Prepares for all types of scientific competitions for Grandes Ecoles, or administrative, such as tax inspector or public finance inspector.
I can also be your literary advisor to develop a summary note, or for any end-of-internship or professional dissertation.

Education

- Engineering diploma from the National School of Civil Aviation (ENAC Toulouse),
- BTS aeronautics,
- Electronics-Electrotechnics-Automation License,
- University Diploma in relational databases (RDBMS).

Experience / Qualifications

20 years of private lessons with Acadomia, Cours Legendre, Matelem, Keepschool, Complétude, Anacours, Lauréat, Domicours, Solution cours, Top scolaire, Addoceo or in class (Les Compagnons du Devoir)

Age

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

90 minutes

120 minutes

The class is taught in

French

English

Skills

Flight

Electrical engineering

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Private lessons in Life and Earth Sciences, BIOCHEMISTRY, CHEMISTRY,

25 € /h

Private lessons in MATHS, PHYSICS, CHEMISTRY, Life and Earth Sciences

25 € /h

Matías

4.88

(85)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Anh

4.88

(85)

In these tailored Engineering sessions, I combine tutoring with mentoring to guide your technical understanding and foster your growth in key engineering concepts. My approach adapts to your natural learning style, ensuring that each lesson is intuitive, engaging, and effective.

With over 10 years of experience in Aerospace, Mechanical, and Electrical engineering, I bring a wealth of both academic and real-world expertise to our sessions. I’ll share insights from the Aerospace, Maritime, and Aviation industries to help you develop practical skills and problem-solving techniques, tailored to your needs.

Whether you're studying:
• Aerospace Engineering
• Aeronautical Engineering
• Mechanical Engineering
• Electrical Engineering
• other types of Engineering

Or need help with areas like control systems or data analysis, I’m here to guide you through any engineering challenge. My lessons are customized to fit your learning style and academic goals, ensuring you leave each session feeling confident and prepared.

Contact me now for availability, and let's schedule your first session soon. I look forward to working with you!
__________________________________________________________________________________

I'm actively supporting students from top universities worldwide, including:

UK:
• Imperial College London (+ Business School) (ICL)
• University College London (UCL)
• King’s College London (KCL)

The Netherlands:
• Delft University of Technology (TUDelft)
• University of Amsterdam (UvA)
• University of Groningen (RUG)

Switzerland:
• ETH Zurich - Swiss Federal Institute of Technology

Australia:
• Queensland University of Technology (QUT)
• University of Queensland (UQ)
• Griffith University
__________________________________________________________________________________

My name is Anh, and I was born and raised in the U.K. With over 10 years of international experience tutoring Maths, Sciences, and Engineering from Middle School to University Level, I’ve supported over 80 students worldwide in unlocking their full potential.

I have a fun, ambitious, and outgoing personality, and I’m passionate about music, cooking, and trying new things. In my tutoring and mentoring, I am patient, adaptable, and committed to meeting the unique needs of each student.

I work as an Engineering Specialist/Consultant, holding:
• Master’s degree in Aeronautical Engineering from Imperial College London,
• AAA* A-Level in Further Maths and Physics,

Having been mentored and tutored myself, I understand the challenges students face. Through my own experiences of overcoming obstacles and achieving success, I’m passionate about helping others do the same. Let’s work together to ensure you reach your full potential, both academically and personally!

4.88

(85)

Hello, I am a doctor in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer support courses in the subjects of engineering sciences (electronics, automation, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism (propagation of high frequency waves)
Automatic (continuous, sampled)
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python,VHDL
PIC Microprocessor and Microcontroller
Signal processing and data acquisition
Engineering Sciences

These courses allow the student to get up to speed and regain confidence in all scientific subjects, just as they prepare him effectively for the Baccalaureate, the Preparatory Classes or various examinations of the engineering classes.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Youssef

4.88

(85)

Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer for students of preparatory classes and technical high school support courses in the subjects of engineering sciences (Electronics, automatic, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism
Automatic
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python
PIC microcontroller
Microprocessor

These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Arianit

4.88

(85)

Electrical engineering forms the backbone of today's technology. From the distribution of electricity worldwide to the implementation of microcircuits, electrical engineering describes and provides the fundamentals of all principles pertaining to electronics, telecommunications, power systems, renewable energy, machines and mechatronics, etc. Having graduated as an Electrical Engineer I am offering Electrical Engineering I and II tutorials for beginner students at the University of Applied Sciences Upper Austria. I have experience in elaborating and describing the following thematics which are often problematic for students who seek a degree in Electronics Engineering, Computer Engineering, Telecommunication Engineering, and Electrical Engineering:
•Electrical Engineering Basics
•Conductor, Isolator, and Semiconductor Physics
•AC Passive components: Inductors, Capacitors and Resistors
•DC Circuit Analysis (Thevenin, Kirchhoff and Helmholtz approaches)
•Three-phase systems
•Diodes and the PN Junction
•Transistor Physics: BJT/IGBT/MOSFET
•Operational Amplifiers
•Electronic Circuitry (Buffers, Signal Amplifiers, etc)
•Transformer and Electromagnetics Basics

Maria

4.88

(85)

Aviation English is a type of English for specific purposes, in this case English used by aviation professionals such as cabin crew, pilots and air traffic controllers.

After many years overseas, both teaching and examining English, I have returned to Spain and am available to share my extensive experience and expertise in all aspects of English. I currently work as an Aviation teacher in a school in Alicante where I have taught for some years.

My teaching approach is student-centred and communicative, where learning is a positive experience in a relaxed and fun atmosphere. All my students are encouraged to speak as much as possible to increase fluency. Professionalism, patience and a good sense of humour guaranteed!

All lesson materials are provided free of charge. I teach using a mixture of coursebook material , whiteboard presentations, listening activities, video clips and general speaking practice.

Classes are for people aged 18 years old and above. I'm available most days/ evenings on Zoom, so let's see what we can achieve together.

I look forward to hearing from you soon.

Ahmed

4.88

(85)

Learn from the ground up, starting with the fundamentals of electronics and various electronic components.
Understand the necessary electrical connections to design and program smart home and Internet of Things (IoT) circuits.
Explore what Arduino is and the programming language used to control it.
Discover how to create programs to control home devices using a mobile phone.

Training includes working with real Arduino circuits as well as using simulation software.
I offer practical and simplified training that starts from the fundamentals of electronics and progresses to designing and programming smart home and Internet of Things (IoT) systems. The course includes clear theoretical explanations and hands-on applications using real circuits and digital simulation software.

Course Content

Electronics Fundamentals

Introduction to essential electronic components: resistors, capacitors, diodes, transistors, and sensors

Understanding proper electrical connections

Reading electronic circuits and using the breadboard

What is Arduino and How Do We Program It?

Introduction to Arduino boards

Explanation of the C/C++ programming language used for Arduino

How to upload code and test projects step by step

Designing and Programming Smart Home Circuits

Connecting sensors and smart switches

Controlling lighting and household devices

Designing a system to control the home using a mobile phone

Introduction to IoT and integrating it with home automation

Mobile Phone Home Control

Creating simple control interfaces

Connecting using Wi-Fi or Bluetooth

Turning devices on and off and monitoring sensors remotely

Practical Training

Working with real Arduino circuits

Using simulation software such as Tinkercad and Proteus

Building ready-to-use practical projects

Who Is This Course For?

Beginners in electronics

Students interested in learning Arduino programming

Anyone who wants to build a smart home project

Anyone looking to understand how electronics work in a simple and practical way

Yassine

4.88

(85)

Are you looking to improve your skills in mathematics, physics or technical skills? I offer courses adapted to your level, whether you are in middle school, high school or even in higher education.

We will cover key concepts in a clear and structured manner to help you master the fundamentals, solve complex exercises and prepare for exams. Whether for support courses or to deepen your knowledge, I am here to guide you.

Alexander

4.88

(85)

Individual learning support for aviation theory and piloting.

Help with preparation for theoretical knowledge exams.

Advice for flight training and skills tests (practical flight exams) including typical challenges and scenarios.

Advanced tutoring in Flight Operations (MB, PERF, FPM, OPS).

Covers all EASA ATPL(A) subjects:
- Air Law
- Aircraft General Knowledge
- Instrumentation
- Mass & Balance
- Performance
- Flight Planning & Monitoring
- Human Performance & Limitations
- Meteorology
- General Navigation
- Radio Navigation
- Operational Procedures
- Principles of Flight
- Communications

Ali

4.88

(85)

I offer one-to-one Electronics and Electrical Engineering tuition for university students, college students, and serious learners. Lessons are available online or in person around Birmingham.

What I cover:

Circuit analysis (DC and AC, Kirchhoff's laws, Thevenin / Norton, op-amps)
Digital electronics and logic design
Signals and Systems, Digital Signal Processing (DSP)
Control systems (Laplace, transfer functions, stability, frequency response)
Embedded systems and microcontroller basics
Power electronics fundamentals
University coursework, lab reports, dissertation and project support
Exam preparation for engineering modules

How I teach:
I start by figuring out exactly which concepts are tripping you up — most students are stuck on one or two key ideas, and once those click, everything else falls into place. I use plenty of worked examples, real circuit diagrams, and clear explanations of the maths behind each topic. For project and dissertation work, I can help you plan, debug, and present your work properly.
If you're struggling with an engineering module, preparing for exams, or working on a final-year project, I can help you turn confusion into confidence.

Fatima

4.88

(85)

🚀 Do you finally want to understand electricity, electronics, or automation without stress? You've come to the right place!

👩‍🏫 I'm an electrical and renewable energy engineer and an experienced teacher. I'll guide you step by step, even if you're starting from scratch.

💡 My courses allow you to:
Understanding the basics of electricity

Master electronic circuits, control systems, and automatons

Learn at your own pace with concrete examples, diagrams, simulations and guided exercises

🧰 Content suitable for:
High school students / students in BTS, DUT, license, preparatory classes, engineering schools......

Students in retraining or self-taught

International students (courses available in French or English)

✅ What sets me apart:
Clear, progressive and caring approach

Support after the course if needed (questions, corrections, etc.)

Online or face-to-face courses

Baryalai

4.88

(85)

The High Voltage Substation Project encompasses all key stages from initiation to completion, including project design, procurement, installation, and implementation. It begins with the development of detailed designs and cost estimations to ensure technical and financial feasibility. The procurement phase focuses on sourcing high-quality equipment and materials in compliance with international standards. Installation and implementation are carried out with strict adherence to safety and reliability requirements. Additionally, on-demand technical support is provided throughout the project lifecycle to ensure efficient operation, timely issue resolution, and optimal performance of the substation system.

Taiwo

4.88

(85)

This online mathematics class helps students build a deep understanding of concepts, strengthen problem-solving skills, and improve performance in school and international exams. I have supported students across various educational systems, helping them overcome learning gaps and develop confidence in math.

Lessons focus on understanding why methods work, not just memorizing formulas. Students learn step-by-step approaches, logical reasoning, and how to clearly explain their solutions—an essential skill for higher-level mathematics.

I support learners studying under curricula such as Cambridge, IGCSE, GCSE, IB (MYP & DP), A-Level, and other international programs. Whether a student needs help catching up, preparing for exams, or aiming for higher achievement, lessons are tailored to their pace and goals.

With structured practice, guided problem-solving, and exam-focused strategies, students gain both clarity and confidence.

Jose

4.88

(85)

This class provides an introduction to the fundamental principles of electrical and electronic engineering with emphasis on control systems and their industrial applications. Topics include basic electrical circuits, electronic components, signal analysis, and the modeling and control of dynamic systems. Students will explore how electrical and electronic technologies are used to design, analyze, and regulate modern engineering systems, including automation, power systems, and industrial processes. The course integrates theoretical concepts with practical examples to develop analytical and problem-solving skills relevant to engineering practice.

Muhammad

4.88

(85)

As a teaching assistant in the College of Engineering (specializing in Mechatronics Systems Engineering), I provide specialized academic support to engineering students to help them understand complex material, pass exams with distinction, and complete academic projects professionally.
I offer explanations and assistance in the following courses:
• Fluid Mechanics & Hydraulic/Pneumatic Control.
• Rigid Body Dynamics.
• Sensors and Data Acquisition Systems.
• Digital control machines and computer-aided design/manufacturing (CAD/CAM & CNC).
• Electric Machines & Drives.
• Renewable Energies.
In addition to theoretical explanations and worksheet solutions, I offer practical guidance in using engineering software (such as MATLAB and ANSYS) and assistance with graduation projects and course projects (CAD modeling and CFD simulations). My goal is to simplify engineering concepts and connect them to practical applications.