Fluid Mechanics / Thermodynamics / Engineering Sciences / Aeronautics

Translated by GoogleSee original

From 38 € /h

I am an Aeronautical engineer, graduated from the Royal Military School.

I provide private lessons in mechanics (fluids or solids), thermodynamics and engineering sciences.

Courses are mainly taught online on different platforms (zoom, skype, teams, etc.).

My goal is to help students understand and find solutions to the problems they face. I try to help them develop their own working method by giving them different elements and guiding them in the way that suits them best.

Location

Online from Belgium

About Me

I am an engineer graduated from the Royal Military School in aeronautics. Since I was little, I have always been passionate about science.

I have participated in many math/logic competitions. I love teaching and above all helping my students to overcome their difficulties, find their own working method and progress at their own pace.

I give private lessons in aeronautics, mechanics, thermodynamics, maths, physics and chemistry at all levels (primary, secondary, university and higher education).

Education

- Academic background oriented towards science
- Scientific baccalaureate (2015)
- Polytechnic engineering diploma at the Royal Military Academy (2020)
- Specialization in aeronautics

Experience / Qualifications

+ Professional experience in aeronautics
+ Private lessons since 2020
+ Advanced mathematics
+ Physics / Chemistry
+ Mechanics
+ Thermodynamics

Age

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

The class is taught in

French

English

Skills

Mechanical engineering

Engineering

Thermodynamics

Availability of a typical week

(GMT -05:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Private lessons in Maths, Physics and / or Chemistry

35 € /h

I am an Aeronautical engineer, graduated from the Royal Military School.
I provide private lessons in Maths (Equations, Calculations, Trigonometry, Logic, etc...), Physics and Chemistry at all levels.
Courses are mainly taught online on different platforms (zoom, skype, teams, etc.).
My goal is to help students understand and find solutions to the problems they face. I try to help them develop their own working method by giving them different elements and guiding them in the way that suits them best.

Matías

4.88

(85)

Do you want to master the most used design software and bring your ideas to life in 3D? Do not search anymore ! I offer specialized courses to guide you through the exciting worlds of CATIA V5/V6, Inventor, Fusion 360, FreeCAD and 3D printing.

CATIA V5/V6: Discover the design software preferred by engineers for creating complex models and precise assemblies.

Inventor: Dive into the world of mechanical design and learn how to develop innovative products with this powerful software.

Fusion 360: Create organic models, run simulations, and hone your design and engineering skills.

FreeCAD: Explore the basics of parametric design and create 3D models ready for manufacturing.

️ 3D printing: Bring your designs to life! Learn how to use 3D printers, from modeling to concrete production.

Whether you're a beginner or looking to improve your skills, my classes are suitable for all levels. With interactive lessons, hands-on projects, and expert guidance, you'll progress quickly and with confidence.

Don't wait to explore the endless potential of 3D design and 3D printing. Join me on this exciting adventure and start creating your own 3D masterpieces today!

Don't miss this opportunity to develop in-demand skills in 3D design and printing. Join me for enriching and practical lessons you won't forget!

See you soon for our first class together!

Youssef

4.88

(85)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Samaa

4.88

(85)

With over 4 years of experience I teach math curriculums (GCSE, IGCSE, IB CNISE, SAT) to students from earlier stages, elementary to high school. I focus on all mathematical concepts, develop classroom materials, organize activities, assign homework, grade tests, and prepare students for exams. I prepare mathematics curriculum for my students, like college entrance exams.

I demonstrate excellent mathematics skills and analytical thinking alongside solid instruction. I instruct my students throughout the year and create lesson plans, assign homework, and manage online classrooms. I keep in touch with parents to be aware of the progress.
I hold a Master's degree in Engineering with teacher education courses and I've achieved the highest grades in my math courses throughout the years with straight A Grades.

My Responsibilities towards my students
-Create a great environment that is conducive to learning.
-Care for and effectively assist students with special concerns.
-Analyze data to determine student progress and achievement.
-Work with individual and small groups of students to support mathematics instruction.
-Encourage students who need extra help
-Plan and carry out instructions, activities and prepare learning materials.
-Maintain appropriate records and follow required procedures and practices.
-Work with students to develop and monitor academic goals for both short-term and long-term success.

My qualifications
-Master Degree in Engineering
-An experienced teacher for over 4 years
-Experience with calculus, geometry, statistics, and trigonometry.
-Dedication to instruction of critical thinking and problem-solving with confidence in a collaborative environment.
- Leadership skills and a positive attitude when assisting with decision making.
-Demonstrated professionalism and dedication to continuous improvement.
-Time management skills.

Ayoub

4.88

(85)

This preparation session is dedicated to students aiming for preparatory classes for scientific Grandes Ecoles (CPGE), with a particular focus on the subjects of Physics and Engineering Sciences. The goal is to strengthen the foundations and deepen the knowledge to succeed.

1. Mechanics:
Kinematics: Study of rectilinear and circular movements, position vectors, speed and acceleration.
Dynamics: Newton's laws, work and energy, kinetic energy theorem.

2. Electromagnetism / Electrokinetics:
Electrostatics: Electric charges and fields, electric potential, capacitance.
Magnetostatics: Magnetic fields, Lorentz forces, electromagnetic induction.
Alternating Currents: RLC circuits, resonance, impedance.

3. Thermodynamics:
Principles of thermodynamics: Internal energy, heat, work, first and second principles.
Ideal and real gases: Equations of state, thermodynamic transformations.

4. Industrial sciences:
Automatic Linear, Kinematic, Static.

For more information and to register for the preparation session, please contact me.

Good preparation and success in your studies!

.

Roland

4.88

(85)

The TU Delft Aerospace Engineering Bachelor is one of the most prestigious bachelor programmes the Netherlands has to offer. With it being highly sought-after by students all around the globe, there is a highly competitive selection procedure which needs to be completed to get admitted to this popular degree. A massive part of this admission procedure is the selection exam, consisting of three different tests: Mathematics, Physics and First-Year Material.

As a cum laude graduated Aerospace Engineer at TU Delft, who has also been tutoring since 2017, I have a lot of valuable experience and knowledge of the program to help you out with the right preparation to get in. Moreover, after successfully helping more than 10 students secure a spot over the last three years, I have decided to prepare an additional custom lesson plan for each student, based on the admission syllabus, to ensure an even higher chance of admission.

With my calm and stepwise explanation, weaker topics will be addressed, and your solution procedures will be polished. Each lesson will either be theory, exercise-based or an opportunity to talk about the admission, student life, Delft, what to expect from the study and whether it is the right fit for you.

Marcos

4.88

(85)

80% of my students got accepted in the 2025 exam, I am sure I can help you out in the 2026 exam!

TU Delft is Europe's most prestigious university for aerospace studies, preparing some of the best engineers. However the selection procedure is tough and demanding, and only those prepared have a chance to succeed.

As a TU Delft student, I know from first hand how stressfull this process is, and can therefore help you succeed in the preparation of these exams. I have previous experience as a tutor back in high school, helping students improve their grades from Cs to As.

Moreover, I have an extensive knowledge on the subjects tested on these exams, having taken them myself, completed the courses at university with excellent grades and teaching over 10 students for the entrance exam.

Throughout the class, I will use a presentation to explain the main concepts of each exam (Maths, Physics and Aerospace Engineering), focusing on those subjects the student is struggling with most. After this, I will help the student complete some practice excercises, and then assign extra practice to complete on their own time. These exercises will then be reviewed in the following class to ensure the topics have been understood.

I am looking forward to help you in your journey as an aerospace engineer!

Reza

4.88

(85)

I hold a PhD in Mechanical Engineering and currently work as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).
Key topics that I teach for this course include:
• Calculus: Differentiation & integration, Multivariable calculus
• Linear Algebra: Matrices, vectors, systems of equations, Eigenvalues and eigenvectors
• Differential Equations: First- and second-order ODEs, Laplace transforms
• Complex Numbers: Polar form, Euler’s formula
• Vector Calculus: Gradient, divergence, curl, Line and surface integrals
• Series & Transforms: Taylor series, Fourier series

I understand that not all teachers excel in teaching Engineering and Mathematics courses and explaining their importance to students. Courses with strong mathematical backgrounds may become boring for students who lack a solid mathematical basis. To address this, I take a student-centered approach, starting from the basics to actively engage all students, including those with weaker mathematical backgrounds. I also provide practical examples to demonstrate the real-world significance of what they are learning, inspiring and fostering their interest in the subject matter.

If you have any additional questions before starting a class, please feel free to ask me. I am here to assist! :)

Yomna

4.88

(85)

This course is designed for students who are curious about how aircraft and spacecraft work, or who are planning to study Aerospace / Aviation Engineering and want a strong, clear introduction before university.

The lessons break down complex engineering concepts into simple, intuitive ideas, with real-world examples from aviation and space — no prior engineering background required.

Who This Course Is For
-High school students interested in aviation or space
-First-year engineering students feeling overwhelmed
-Students considering Aerospace or Aviation Engineering
-Curious learners who love planes, rockets, and technology

Mohamed

4.88

(85)

Learn calculus from an instructor with proven experience tutoring advanced calculus at the college level. This course combines rigorous academic standards with clear, student-centered explanations to help learners truly understand challenging concepts.

With experience guiding university students through advanced topics, the instruction is practical, thorough, and focused on long-term mastery—ideal for students pursuing mathematics, engineering, or science.

Boaz

4.88

(85)

Maths for Everyone is a class designed for people who want to understand maths clearly and without fear. It is open to learners of all backgrounds, whether you struggled with maths before or simply want a stronger foundation.

The class focuses on real understanding rather than memorising formulas. Concepts are explained step by step using simple language, clear examples, and practical intuition. Students are encouraged to ask questions, make mistakes, and build confidence at their own pace.

Lessons are adapted to the level of the learners and may cover core arithmetic, algebra, functions, graphs, probability, basic statistics, and problem solving skills. The goal is not speed, but clarity and confidence.

No prior knowledge is required. The aim of this class is to make maths understandable, useful, and accessible to everyone.

Ali

4.88

(85)

Physics and materials science can be challenging without the right explanations. I offer structured, clear, and personalized tutoring to help students truly understand concepts rather than memorize formulas.

I hold a PhD in Materials Science & Nanotechnology and have several years of experience teaching and mentoring university students in physics, materials science, and semiconductor-related topics.

My classes are adapted to the student’s level and goals, whether you are:
- Preparing for university exams
- Studying engineering or physics
- Struggling with core concepts and problem-solving
- Looking to deepen your understanding for research or advanced studies

Topics can include (but are not limited to):
- General Physics (mechanics, electromagnetism, thermodynamics)
- Solid-State Physics & Semiconductor Physics
- Materials Science fundamentals
- Nanotechnology & MEMS basics
- Exam preparation and problem-solving strategies

I focus on clear explanations, step-by-step problem solving, and building confidence. Lessons are interactive and always tailored to your needs.

Lyne

4.88

(85)

Overview
Practical lessons covering core and cutting-edge automotive systems, for students, technicians, enthusiasts, and industry professionals.

Key Topics

-Engineering maths

- Engine mechanics, powertrains and chassis design

- Electrical/electronics, hybrid/electric tech

- CAD design, materials and manufacturing

- Diagnostics, maintenance and performance tuning

- Autonomous vehicles, alternative fuels and connected cars

Fernando

4.88

(85)

Do you need extra help with maths and/or physics? I'm an experienced tutor in these two subjects, teaching university and pre-university students worldwide (Switzerland, the UK, Spain, France, and Dubai).

Linear Algebra:
-Linear systems of equations. Types and solving
-Vectors and vector spaces. Orthogonality. Dot and cross product. Matrices
-Linear dependency
-Space generator systems and bases
-Different types of equations that define a straight line and a plane
-Linear applications and change of base
-Eigenvalues and eigenvectors
-Diagonalization
-Etc

Calculus:
-Functions of one and more variables: limits and continuity, calculation of derivatives, their application and implicit differentiation. Optimization for functions of more than one variable (without restrictions and with Lagrange multipliers)
-Numerical and functional series: sequences, limit and convergence of a sequence. Relationship between numerical series and sequences. Geometric series, types. Absolute and conditional convergence, methods. Function series: power series, Taylor and MacLaurin series, and their interval of convergence. Fourier series
-Integration: properties, relationship between differential and integral calculus, calculus of primitives, improper integrals and applications of the integral (calculation of areas, volumes and surfaces)

Mechanics:
-Kinematics
-Particle Dynamics
-Work and Energy
-Rotational Dynamics
-Rigid body Statics
-Introduction to Fluid Mechanics
-Waves and Oscillations

If you're interested, please don't hesitate to contact me and tell me a bit more about your situation and academic needs. This way, I can get a better understanding of your context and therefore organize and prepare the classes in a more personalized way.

See you in class!

Alice

4.88

(85)

The classes introduce students to the fundamental principles and problem-solving methods used in math, physics, and engineering, with an emphasis on logical reasoning, mathematical modeling, and real-world applications. Through a mix of theory, worked examples, and hands-on exercises, students learn how to translate physical or practical problems into equations, analyze systems using quantitative tools, and interpret results critically. I focus on building a strong analytical foundation that supports advanced study and equips students with skills commonly used in scientific research and engineering design.

Jammal

4.88

(85)

Hi, my name is Jammal and I give math and physics lessons for all school levels.
I'm an aerospace engineer and I'm training to be an airline pilot :)