Teaching and establishing materials for the Department of Electronics and Communications Engineering for students

Translated by GoogleSee original

From 63.47 € /h

More than 10 years of experience teaching inside the Emirates for students of Colleges of Technology, Abu Dhabi University, Baynouna Institute and Emirates University. In addition to the work of projects for students and solutions for reports. The possibility of detailed explanation in an easy and simple way.

Items that can be explained:

Electrical and electronic circuits 1 and 2 - Digital circuits - Mathematics such as 1, 2 and 3 - Physics - Measurements - Machines - Engineering economics - Matlab - Communication - control - DSP - signals & systems - PLC

All subjects of electrical engineering department
Electronics I,II, Advanced Electronics, . Electrical and Electronics circuits 1 and 2 - Digital circuits
-Digital logic- Mathematics with all its sections - Physics - Measurements -Instrumentation- Matlab - Analog and Digital Communications - DSP (Digital signal Processing)- signals and systems -Logic design- Control - economic Engineering - networks- PLC - micro.

All electrical engineering subjects related

Extra information

Bring your laptop or phone

Location

Online from United Arab Emirates

About Me

Master's degree in Electronics and Communications Engineering with overall distinction

Support is available through this link

Over 13 years of experience teaching in the UAE to students at Higher Colleges of Technology, Abu Dhabi University, Baynounah Institute, and UAE University. In addition, I work on student projects and report solutions. I can provide detailed explanations in a clear and simple manner.

Items that can be explained:

Electrical and electronic circuits 1 and 2 - Digital circuits - Mathematics such as 1, 2 and 3 - Physics - Measurements - Machines - Engineering economics - Matlab - Communication - control - DSP - signals & systems - PLC

All subjects of electrical engineering department
Electronics I,II, Advanced Electronics, . Electrical and Electronics circuits 1 and 2 - Digital circuits
-Digital logic- Mathematics with all its sections - Physics - Measurements -Instrumentation- Matlab - Analog and Digital Communications - DSP (Digital signal Processing)- signals and systems -Logic design- Control - economic Engineering - networks- PLC - micro.

All electrical engineering subjects related

Education

Faculty of Engineering, Electronics and Communications, Mansoura University
Over 13 years of experience teaching in the UAE to students at Higher Colleges of Technology, Abu Dhabi University, Baynounah Institute, and UAE University. In addition, I work on student projects and report solutions. I can provide detailed explanations in a clear and simple manner.

Items that can be explained:

Electrical and electronic circuits 1 and 2 - Digital circuits - Mathematics such as 1, 2 and 3 - Physics - Measurements - Machines - Engineering economics - Matlab - Communication - control - DSP - signals & systems - PLC

All subjects of electrical engineering department
Electronics I,II, Advanced Electronics, . Electrical and Electronics circuits 1 and 2 - Digital circuits
-Digital logic- Mathematics with all its sections - Physics - Measurements -Instrumentation- Matlab - Analog and Digital Communications - DSP (Digital signal Processing)- signals and systems -Logic design- Control - economic Engineering - networks- PLC - micro.

All Electrical engineering subjects relate

Experience / Qualifications

14 years of experience in training, qualifying, and teaching students in electronics engineering colleges

Electronics I,II, Advanced Electronics, . Electrical and Electronics circuits 1 and 2 - Digital circuits
-Digital logic- Mathematics with all its sections - Physics - Measurements -Instrumentation- Matlab - Analog and Digital Communications - DSP (Digital signal Processing)- signals and systems -Logic design- Control - economic Engineering - networks- PLC - micro.

Age

Teenagers (13-17 years old)

Adults (18-64 years old)

Student level

Intermediate

Advanced

Duration

60 minutes

The class is taught in

Arabic

English

Skills

Electrical circuits

Electronic circuits

Telecommunications

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Learn mathematics for all educational levels in the easiest way

55.02 € /h

Establishing and training students in all mathematics lessons, in addition to the possibility of teaching all engineering subjects, Electrical Engineering Department, 11 years of experience, in all UAE curricula
Abu Dhabi College - Higher Colleges of Technology - Zayed University - Dubai College - College of Sharjah - Ajman University - Khalifa University - Petroleum Institute - UAE University

4.85

(13)

Engineer and senior professor of engineering sciences provides support courses in analog and digital electronics at all levels, engineering schools. having a scientific and technical knowledge, five years of experience in the field of teaching, teaching and a sense of listening and analysis, I am able to help pupils and students and train them in the chapters of which they have difficulties. for more info please contact me

Matías

4.85

(13)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Nassim

4.85

(13)

Detailed explanation of basic electronics courses starting from basic elements to the most complicated structures, solid course with detailed explanation

All electronic components

Basic logic circuits
integrated circuits

Marko

4.85

(13)

✅ Experienced teacher offering private online physics lessons for all levels.
✅ Fully dedicated and focused on student progress.
✅ Very patient, systematic, and organized.

I teach a wide range of topics in physics, including but not limited to:

5- Physical quantities and units
- Kinematics (types of motion, kinematics of point particles and rigid bodies)
- Dynamics (frictional and inertial forces, Newton's laws)
- Laws of conservation (energy, momentum)
- Theory of collision processes
- Inertial and non-inertial reference frames
- Potential and kinetic energy
- Gravitation and gravity fields
- Oscillatory and wave motions
- Harmonic oscillator
- Doppler effect
- Standing waves
- Sound waves and physical characteristics of sound
- Surface tension and capillary phenomena
- Fluid mechanics
- Temperature and heat
- Calorimetry
- Phase transitions
- Principles of thermodynamics
- Electrostatics
- Electromagnetism
- Kirchhoff's laws
- Electronic circuits
- Dielectrics
- Optics
... and much more.

If there are specific topics you would like to focus on or if you have any questions, feel free to let me know. I am here to help you deepen your understanding of physics.

Abdelali

4.85

(13)

Hello, I am an electrical engineer having an extensive experience as a professor in higher education in engineering science and electrical engineering, as well as great experience as an embedded systems engineer, in EE architecture, ADAS, Testing and validations in the automotive sector.

I offer support courses and training in engineering science subjects, particularly in Automation and Industrial Control, to graduate students. My methodology is based on the acquisition of knowledge and course concepts in a very simple manner and also on practical experience using the most widely used software on the market.

Automation is the discipline that, generally speaking, deals with the control of systems. It is therefore very important in the industrial field, to which it provides solutions, study methods, and systematic analysis approaches. It is a scientific discipline that studies dynamic systems, signals, and information for the purposes of control or decision-making.

This course consists of six chapters, divided as follows:

Chapter 1: Introduction to Automation & Controlled Systems
Chapter 2: Mathematical Modeling of Controlled Systems
Chapter 3: Time & Frequency Analysis of Controlled Systems
Chapter 4: Controlling Systems & Block Diagram Algebra
Chapter 5: Stability & Performance of Controlled Systems
Chapter 6: Correction and Regulation of Controlled Systems

Dr.

4.85

(13)

This course serves as your comprehensive guide to understanding and harnessing the power of IoT and Arduino to create innovative and intelligent solutions. The Internet of Things has emerged as a game-changing technology that has the potential to transform industries, revolutionize everyday life, and unlock endless possibilities. By connecting physical objects and devices to the internet, IoT enables seamless communication, data exchange, and intelligent decision-making.

Arianit

4.85

(13)

Electrical engineering forms the backbone of today's technology. From the distribution of electricity worldwide to the implementation of microcircuits, electrical engineering describes and provides the fundamentals of all principles pertaining to electronics, telecommunications, power systems, renewable energy, machines and mechatronics, etc. Having graduated as an Electrical Engineer I am offering Electrical Engineering I and II tutorials for beginner students at the University of Applied Sciences Upper Austria. I have experience in elaborating and describing the following thematics which are often problematic for students who seek a degree in Electronics Engineering, Computer Engineering, Telecommunication Engineering, and Electrical Engineering:
•Electrical Engineering Basics
•Conductor, Isolator, and Semiconductor Physics
•AC Passive components: Inductors, Capacitors and Resistors
•DC Circuit Analysis (Thevenin, Kirchhoff and Helmholtz approaches)
•Three-phase systems
•Diodes and the PN Junction
•Transistor Physics: BJT/IGBT/MOSFET
•Operational Amplifiers
•Electronic Circuitry (Buffers, Signal Amplifiers, etc)
•Transformer and Electromagnetics Basics

Youssef

4.85

(13)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Yassine

4.85

(13)

Discover the world of robotics, electronics, and programming with a course designed for technology and innovation enthusiasts. Whether you are a beginner or already have some basics, this course will guide you through the fundamentals, with a hands-on approach to designing your own projects. You will learn how to use electronic components, program microcontrollers, and assemble robots to perform autonomous tasks.

Ossama

4.85

(13)

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School. I master the teaching of analog and digital electronics, covering components, integrated circuits and embedded systems.
- Fundamentals of electronics: Definitions, basic concepts, Kirchhoff's laws.
- Electronic components: Resistors, capacitors, inductors, diodes.
- Operational amplifiers: Operation, characteristics, applications.
- Basic analog circuits: Amplifiers, filters, oscillators.
- Introduction to digital electronics: Binary logic, logic gates, combinational circuits.
- Numbering systems: Conversion between bases, adders, subtractors.
- Transistors: Bipolar transistors, field effect transistors, characteristics, applications.
- Transistor amplifiers: Configuration, gain calculations, stability.
- Analog integrated circuits: Voltage regulators, A/D and D/A converters.
- Sequential digital systems: Flip-flops, registers, counters.
- Microcontrollers and microprocessors: Architecture, basic programming, interfaces.
- Analysis of electronic circuits: Frequency and time analysis methods.
- Advanced analog circuits: Differential amplifiers, power amplifiers, active filters.
- Modulation and demodulation techniques: AM, FM, PM.
- Embedded systems: Design of real-time systems, communication between peripherals.
- Test and measurement techniques: Oscilloscope, spectrum analyzer, signal generators.
-

Ali

4.85

(13)

My lessons are designed to build a strong technical foundation in Electrical and Electronic Engineering, with a clear focus on engineering theory, practical application, and problem-solving skills.

I teach a wide range of core Electrical & Electronic Engineering subjects, including analogue circuits, digital electronics, power systems, power electronics, renewable energy systems, control systems, engineering mathematics, and engineering physics. Each topic is explained using fundamental engineering principles, mathematical modelling, equations, and step-by-step derivations, ensuring students understand not only how solutions work, but why they work.

Lessons regularly involve circuit analysis, system modelling, signal analysis, and simulation-based learning using industry-standard engineering software such as MATLAB, Simulink, ORCAD, and PSpice. I also provide hands-on guidance in embedded systems and microcontroller programming, including Arduino programming, sensor interfacing, and basic real-time system design. Where relevant, I introduce engineering design workflows, helping students convert theoretical knowledge into practical, working engineering systems.

In addition to concept teaching, I support students with university assignments, coursework, lab reports, final-year projects, and exam preparation. This includes structured problem-solving techniques, past-paper practice, numerical analysis, debugging support, and exam strategy tailored to UK universities.

My goal is to help students develop strong engineering fundamentals, analytical thinking, and practical technical skills that are essential for academic success, professional engineering careers, and real-world applications.

Ahmed

4.85

(13)

Fundamentals of electronics engineering, Arduino programming, and smart home circuits

I offer practical and simplified training that starts from the basics of electronics and goes up to the design and programming of smart home and Internet of Things systems, with theoretical explanations and practical applications on real circuits and digital simulations.

Course content:
1. Fundamentals of Electronics

Identifying different electronic components: resistors, capacitors, diodes, transistors, and sensors.

Understanding correct electrical connections

Reading electronic circuits and working with breadboards

2. What is Arduino? And how do we program it?

Introduction to Arduino boards

Explanation of the C++ programming language used with Arduino

How to download code and test projects step by step

3. Design and programming of smart home circuits

Connecting sensors and smart switches

Lighting and electrical appliance control

Designing a system that controls the home using a mobile phone

Introduction to the Internet of Things (IoT) and its connection to home control

4. Controlling the home from a mobile phone

Creating simple control interfaces

Connect using Wi-Fi or Bluetooth

Remote device operation and sensor monitoring

5. Practical training

Real Arduino circuit experiment

Using simulation software such as Tinkercad and Proteus

Practical projects ready for implementation

Who is this course for?

Beginners in the field of electronics

Students interested in Arduino programming

Who wants to create a smart home project?

Anyone who wants to understand how electronics work in a simple and practical way

Abdallah

4.85

(13)

I offer online tutoring in High School Mathematics & Physics, University Electronics/Electronic Circuits, and Turkish language.
Lessons are structured, clear, and focused on understanding + practice, with personalized plans, step-by-step solutions, and regular feedback.

Pritty

4.85

(13)

I offer structured and personalized courses in analog and digital electronics, covering everything from circuit fundamentals to integrated circuit (IC) design and system-level concepts. With a PhD in Electronics and academic as well as research experience, I help students build strong technical foundations while developing real-world engineering intuition. My teaching approach combines clear theory, practical examples, problem-solving techniques, and design-oriented thinking. Courses are suitable for undergraduate and master’s students, PhD candidates, and professionals, as well as motivated high-school students preparing for engineering studies. Whether your goal is exam preparation, project support, or gaining confidence in electronics design, I adapt the course content and pace to your needs with professionalism, clarity, and encouragement.

Saul

4.85

(13)

1. Fundamentals of Networks and Systems
Before breaking something, you need to know how it works. In this stage you will learn:
The OSI Model: Understanding how data travels from an application to the physical cable.
Essential protocols: What TCP/IP, DNS, HTTP/S and FTP are and how they work.
Command line: Overcoming the fear of the Linux terminal and the Windows CMD.
2. The Security Triad (CIA)
This is the industry's "Lord's Prayer." A good course will teach you how to protect these three fronts:
Confidentiality: Ensure that only authorized people see the data (Encryption).
Integrity: Ensuring that the information is not altered (Hashing).
Availability: That the systems are active when needed (Mitigation of DoS attacks).
3. Types of Attacks and Threats
This is where the theory gets exciting. You will learn to identify:
Social Engineering: How attackers deceive people (Phishing, Vishing).
Malware: Differences between viruses, Trojans, ransomware and spyware.
Web Vulnerabilities: Basic concepts such as SQL Injection or Cross-Site Scripting (XSS).
4. Defense and Mitigation
It's not all about attack; most of the real work is about protecting:
Using Firewalls and Antivirus: Basic Configuration.
Identity Management: Two-factor authentication (2FA) and biometrics.
Basic cryptography: How public and private keys work.
SIEM Log event management.