Programming and Hardware Designing of Microcontroller 8051

A partir de 28.36 $ /h

Programming the 8051 Microcontroller.
In this course you can be able understand the history and how a microcontroller is organized inside the internal structurer. The principle in the digital computing and the way of stored programmed concept. We will spend few hours on the basics of digital computing and will understand the hardware architecture of microcontroller 8051. The assembly language programming of 8051. The Programming on the 8051 resources along with the complier activity. We will learn to use the keil compilers and do the software simulation both in assembly and C. We will understand how to dump the hex file to the microcontroller. The detailed way of organizing and designing the memory map for 8051 will be studied with address map calculation. will design sample boards. Finally will design the 8051 based boards of Analog signal acquisition to microcontroller 8051 and delivering to a Digital to analog converter for Realtime signal functionality.

Información adicional

Laptop with good internet

Lugar

Conectado desde India

Acerca de mí

Many of the Micro-controller and Microprocessor teachers teaches the course more on the theory and book contents. The deviation in this learning part is the students are not knowing the internal bit level functioning inside the CPU and the tricks in the assembly level programming. In this place where i can able to clarify more to the students on the bit level function of different levels of processor domain classes. Interfacing sensor and actuators with controllers and memory interface area are the strong area of my teaching in which students can definitely understand and able to design any type of processor system. Memory mapping is an another area where distinct design making with more number of device will be demonstrated and make the students to practice with good design. I can help them in the processor assignments and tutorial solving. ARM processor theory can be introduced to students and simple program execution can be demonstrated. The theoretical knowledge of RTOS will be demonstrated in a more understandable way to the students. Generally I teach the subjects. I can't write exams for the students.
Arduino is an another easier hardware in which we can interface many sensors and take the analog signals and do some processing the send the processed signal to the output actuator. Many sensors i have interfaced to Arduino and triggered many actuator. I ca n help students in making projects based on Arduino boards.

Formación

Ph.D. (Instrumentation and Control Engineering)
2011, National Institute of Technology, Tiruchirappalli
M.E. (Electronics and Communication Engineering)
2000, National Institute of Technical Teachers Training Institute, Chandigarh
B.E. (Electronics and Communication Engineering)
1988, Mohamed Sathak Engineering College, Keelakarai (Madurai Kamaraj University)

Experiencia / Calificaciones

2020 to Till date Technology reviewer Cannytech Solutions, Texas , US
2013-2020 Associate Professor Thiagarajar college of engineering, Madurai
2010-2013 Assistant Professor Thiagarajar college of engineering, Madurai
2006-2010 Senior Lecturer Thiagarajar college of engineering, Madurai
2001-2006 Lecturer Thiagarajar college of engineering, Madurai
1991-2001 Lecturer SLIET, Longowal, Punjab, Govt. of India

Edad

Niños (7-12 años)

Adolescentes (13-17 años)

Adultos (18-64 años)

Tercera edad (65+ años)

Nivel del estudiante

Principiante

Intermedio

Avanzado

Duración

60 minutos

La clase se imparte en

inglés

Habilidades

Electrotécnica

Disponibilidad en una semana típica.

(GMT -04:00)

Nueva York

En línea vía webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Microcontroller(8051) Microprocessor(8085) Sensors and Actuators

28.36 $ /h

Many of the Micro-controller and Microprocessor teachers teaches the course more on the theory and book contents. The deviation in this learning part is the students are not knowing the internal bit level functioning inside the CPU and the tricks in the assembly level programming. In this place where I can able to clarify more to the students on the bit level function of different levels of processor domain classes. Interfacing sensor and actuators with controllers and memory interface area are the strong area of my teaching in which students can definitely understand and able to design any type of processor system. Memory mapping is an another area where distinct design making with more number of device will be demonstrated and make the students to practice with good design. I can help learners in practicing the microprocessor assignments and tutorial solving. ARM processor theory can be introduced to students and simple program execution can be demonstrated. The theoretical knowledge of RTOS will be demonstrated in a more understandable way to the students. Generally I teach the subjects. I can't write exams for the students.
Arduino is an another easier hardware in which we can interface many sensors and take the analog signals and do some processing and send the processed signal to the input of a actuator. Practically different sensors I have interfaced to Arduino and triggered many actuator. I can help students in making projects based on Arduino boards.

Matías

4.88

(85)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Christophe

4.88

(85)

I am a 41-year-old mechanical design and structural calculation engineer.
I offer private lessons at college and high school level in Engineering Sciences as well as in the following subjects: Mathematics; Chemical Physics ; Mechanical ; Technology; Digital Sciences and I offer primary-college courses in French, English and Spanish.
I am willing to pick up the kids after school to continue with homework or lessons.

My assets, for the students and the teaching that I provide: → I show young people the concrete use of what they learn by real and speaking examples → I use my ability to capitalize on the know-how as well as my knowledge in knowledge management to transmit my knowledge to them → I have developed many tutorials within my professional career and am able to set up a program with paper, computer or digital media → I have acquired great rigor, particularly in hypotheses and definitions, through my thesis and my mastery of national, European and international standards which are very precise → I have good oral and handwritten communication in French, English and Spanish if you have foreign students.

Santiago

4.88

(85)

La electricidad es muy importante para la vida, y es importante que la aprendas para tu día a día te enseñaré desde como cambiar un plafón un toma y un suiche hasta que clases de circuitos hay y como se manejan.
¿ Tienes electricidad en tu casa que esperas entra en el curso y aprende?

Miguel

4.88

(85)

Primary: Mathematics for students from first grade to eighth grade
Secondary: Mathematics for students from first grade to fourth grade
University/Technical: Mathematics for students in Institutes, Technical and university training center

Elmeri

4.88

(85)

With over 8 years of teaching experience and more than 70 students taught, I believe I can help you with your studies. I think humor and friendly attitude towards studying makes it most effective and also helps with motivation. I can put complex things simply and help you understand what is it that you might be missing from your knowledge to grasp the concept fully.

I myself am an outgoing sportsy theater-kid who is currently doing three university degrees at the same time. I have already completed a bachelor degree in electrical engineering and am currently working on a masters in advanced energy solutions, and bachelors in environmental sciences and economics.

Shoot me a message via email and we'll discuss the details!

Alexis

4.88

(85)

I provide online tutoring classes to students from all academic levels from high school to college. I teach Algebra, Calculus, Trigonometry, and Differential Equations. I will apply efficient and fast methods to help you in your classes. Also, the classes can be taught in Spanish or English.

Gastón

4.88

(85)

Adéntrate en el fascinante mundo de la ingeniería electrónica con mis asesorías diseñadas para potenciar tus conocimientos y habilidades. Mis clases particulares se centran en la resolución de trabajos, soporte en el desarrollo de proyectos, preparación intensiva para exámenes y atención personalizada a consultas. Trabajo tanto con el material propio de alta calidad como con el contenido propuesto por el estudiante, adaptándome a sus necesidades y ritmo de estudio.

Kiliam

4.88

(85)

Curso de refuerzo y aprendizaje técnico orientado a estudiantes de Ciclos Formativos de Grado Medio y Superior en electricidad. Se repasarán conceptos esenciales como:

Aplicación de la Ley de Ohm

Cálculo y selección de fusibles, secciones de cableados, protecciones eléctricas y seccionadores

Interpretación y diseño de esquemas eléctricos unifilares y multifilares

Cálculo de resistencias en serie y/o paralelo

Manejo básico y medio de instrumentación eléctrica (multímetro, pinza amperimétrica, comprobador de tensión, etc.)

Introducción a la programación de autómatas (PLCs): entradas/salidas, temporizadores, contadores

Diseño y análisis de circuitos eléctricos de maniobra y fuerza

Normativa básica (REBT, simbología eléctrica, seguridad)

Conceptos de automatización industrial y cableado de cuadros eléctricos

Este curso está pensado para consolidar conocimientos clave del currículo de los módulos como Instalaciones eléctricas interiores, Electrotecnia, Automatismos industriales, y Sistemas electrotécnicos y automatizados.

Mouna

4.88

(85)

This course is designed for people who want to master their computer from scratch or strengthen their basic computer skills. We'll cover programs such as Word, Excel, browsers, online tools, file management, email, computer security, and much more.

You'll learn in a practical way, tailored to your own pace. My goal is to help you gain confidence with technology so you can use it in your daily life, studies, or work. No previous experience is necessary.

Alessio

4.88

(85)

In today's world of digital transformation, it is very important to know the fundamentals of the most important subjects.
That's why by learning mechanical and electronic engineering and their technological foundations, we'll come to understand the fundamentals of the information technology that dominates today's world of digital transformation.
Learning mechanical and electronic technology means this.
Read and learn!

Aién

4.88

(85)

Soy Aién, estudiante de quinto año de Ingeniería Electromecánica en la Universidad Nacional de La Plata (UNLP). Desde siempre me han interesado la Matemática y las materias técnicas, tanto durante mi formación en la escuela secundaria técnica como en la universidad. Con el tiempo, descubrí también mi vocación por enseñar y acompañar a otros en su proceso de aprendizaje.

Ofrezco clases de Matemática para nivel primario, secundario e ingreso universitario, además de Electrotecnia, Termodinámica y talleres relacionados con la Tecnicatura en Electromecánica.
Me gusta que las clases sean un espacio donde el estudiante se sienta cómodo para preguntar y aprender a su ritmo. Trabajo con explicaciones claras, ejercicios guiados y acompañamiento constante, buscando que entienda los temas y gane confianza. Realizo una breve evaluación inicial para organizar el plan de estudio según sus necesidades. Sobre las clases:
* Explicaciones con ejemplos prácticos, pensadas para entender de verdad.
* Ejercicios adicionales y material complementario para reforzar lo aprendido.
* Seguimiento personalizado, para que veas tus progresos clase a clase.
* Simulacros de examen para practicar con confianza.
* Acceso a apuntes y recursos usados en clase.
* CLASES GRABADAS.

David

4.88

(85)

Electronic engineering student. I'm looking to tutor secondary school (ESO) and high school (Bachillerato) students, as these are the subjects I'm most proficient in. My preferred subjects are mathematics, physics, technical drawing, and technology. I aim to teach through understanding, ensuring students know what they're doing and don't learn blindly. I start with theory and then apply it to fully grasp the concepts.

Tofigh

4.88

(85)

Many engineering students struggle with challenging subjects and find certain concepts confusing. Some understand the theory but have difficulty applying it to exercises, while others are unsure how to approach the development of a project.
The purpose of my classes is to help students gain the confidence and skills needed to succeed in exams, complete their assignments, and prepare for their professional careers.
I assess each student’s strengths and weaknesses and guide them step by step in developing solid problem-solving abilities. We work interactively, beginning with simple tasks and progressively moving toward more complex challenges.
With 26 years of experience teaching in this field, I can quickly identify learning gaps and apply the most effective strategies to ensure students achieve the best possible results—always considering the demanding nature of engineering programs.

Electrical Engineering, Electronics Engineering, Robotics, Programming, Electrical Circuits Theory, Signals and Systems, Linear Control, Digital and Analog Circuits, Amplifiers, Transistors, Diodes, Direct Current, Alternative Current, Three-Phase, Logic Circuits, Combinational and Sequential Circuits, Hardware, VHDL
Optimization, Modeling, Design and prototyping Projects, Physics, Mathematics, Calculus, Algebra

Johan

4.88

(85)

Este curso está orientado a estudiantes de primaria, secundaria y universidad que deseen fortalecer sus competencias en programación, matemáticas, cálculo y física aplicada. Se imparten clases personalizadas en C++, C#, programación con microcontroladores (Microchip) y desarrollo de páginas web, combinando fundamentos teóricos con aplicación práctica en proyectos reales.

En el área de matemáticas y física, se trabajan bases sólidas en álgebra, trigonometría, cálculo diferencial e integral, análisis de problemas y razonamiento lógico, enfocados en mejorar el desempeño académico y la comprensión profunda de los conceptos.

Las clases se adaptan al nivel del estudiante, con metodología estructurada, ejercicios guiados, resolución paso a paso y acompañamiento en tareas, proyectos o preparación para exámenes.

Jose

4.88

(85)

This class provides an introduction to the fundamental principles of electrical and electronic engineering with emphasis on control systems and their industrial applications. Topics include basic electrical circuits, electronic components, signal analysis, and the modeling and control of dynamic systems. Students will explore how electrical and electronic technologies are used to design, analyze, and regulate modern engineering systems, including automation, power systems, and industrial processes. The course integrates theoretical concepts with practical examples to develop analytical and problem-solving skills relevant to engineering practice.