Microcontroller(8051) Microprocessor(8085) Sensors and Actuators

Àpd 192.88 CNY /h

Many of the Micro-controller and Microprocessor teachers teaches the course more on the theory and book contents. The deviation in this learning part is the students are not knowing the internal bit level functioning inside the CPU and the tricks in the assembly level programming. In this place where I can able to clarify more to the students on the bit level function of different levels of processor domain classes. Interfacing sensor and actuators with controllers and memory interface area are the strong area of my teaching in which students can definitely understand and able to design any type of processor system. Memory mapping is an another area where distinct design making with more number of device will be demonstrated and make the students to practice with good design. I can help learners in practicing the microprocessor assignments and tutorial solving. ARM processor theory can be introduced to students and simple program execution can be demonstrated. The theoretical knowledge of RTOS will be demonstrated in a more understandable way to the students. Generally I teach the subjects. I can't write exams for the students.
Arduino is an another easier hardware in which we can interface many sensors and take the analog signals and do some processing and send the processed signal to the input of a actuator. Practically different sensors I have interfaced to Arduino and triggered many actuator. I can help students in making projects based on Arduino boards.

Informations supplémentaires

Bring your laptop with good internet facility.

Lieu

En ligne depuis Inde

Présentation

Many of the Micro-controller and Microprocessor teachers teaches the course more on the theory and book contents. The deviation in this learning part is the students are not knowing the internal bit level functioning inside the CPU and the tricks in the assembly level programming. In this place where i can able to clarify more to the students on the bit level function of different levels of processor domain classes. Interfacing sensor and actuators with controllers and memory interface area are the strong area of my teaching in which students can definitely understand and able to design any type of processor system. Memory mapping is an another area where distinct design making with more number of device will be demonstrated and make the students to practice with good design. I can help them in the processor assignments and tutorial solving. ARM processor theory can be introduced to students and simple program execution can be demonstrated. The theoretical knowledge of RTOS will be demonstrated in a more understandable way to the students. Generally I teach the subjects. I can't write exams for the students.
Arduino is an another easier hardware in which we can interface many sensors and take the analog signals and do some processing the send the processed signal to the output actuator. Many sensors i have interfaced to Arduino and triggered many actuator. I ca n help students in making projects based on Arduino boards.

Education

Ph.D. (Instrumentation and Control Engineering)
2011, National Institute of Technology, Tiruchirappalli
M.E. (Electronics and Communication Engineering)
2000, National Institute of Technical Teachers Training Institute, Chandigarh
B.E. (Electronics and Communication Engineering)
1988, Mohamed Sathak Engineering College, Keelakarai (Madurai Kamaraj University)

Expérience / Qualifications

2020 to Till date Technology reviewer Cannytech Solutions, Texas , US
2013-2020 Associate Professor Thiagarajar college of engineering, Madurai
2010-2013 Assistant Professor Thiagarajar college of engineering, Madurai
2006-2010 Senior Lecturer Thiagarajar college of engineering, Madurai
2001-2006 Lecturer Thiagarajar college of engineering, Madurai
1991-2001 Lecturer SLIET, Longowal, Punjab, Govt. of India

Age

Enfants (7-12 ans)

Adolescents (13-17 ans)

Adultes (18-64 ans)

Seniors (65+ ans)

Niveau du Cours

Débutant

Intermédiaire

Avancé

Durée

60 minutes

Enseigné en

anglais

Compétences

Electrotechnique

Circuits electroniques

Disponibilité semaine type

(GMT -04:00)

New York

Cours par webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Programming and Hardware Designing of Microcontroller 8051

192.88 CNY /h

Programming the 8051 Microcontroller.
In this course you can be able understand the history and how a microcontroller is organized inside the internal structurer. The principle in the digital computing and the way of stored programmed concept. We will spend few hours on the basics of digital computing and will understand the hardware architecture of microcontroller 8051. The assembly language programming of 8051. The Programming on the 8051 resources along with the complier activity. We will learn to use the keil compilers and do the software simulation both in assembly and C. We will understand how to dump the hex file to the microcontroller. The detailed way of organizing and designing the memory map for 8051 will be studied with address map calculation. will design sample boards. Finally will design the 8051 based boards of Analog signal acquisition to microcontroller 8051 and delivering to a Digital to analog converter for Realtime signal functionality.

François

4.38

(8)

Civil engineer, with extensive experience in individual training, gives:

>Maths, physics, chemistry, statistics, algebra, geometry, analysis
>Electricity, automatic, electronic

For secondary level up to master.
I illustrate the theory on the basis of concrete examples thanks to my experience in the business environment.

4.38

(8)

Engineer and senior professor of engineering sciences provides support courses in analog and digital electronics at all levels, engineering schools. having a scientific and technical knowledge, five years of experience in the field of teaching, teaching and a sense of listening and analysis, I am able to help pupils and students and train them in the chapters of which they have difficulties. for more info please contact me

Matías

4.38

(8)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Ahmed

4.38

(8)

Professeur agrégé en Sciences Industrielles de l’Ingénieur et Ingénierie Electrique, et Ingénieur d'état en génie électrique. Disponible pour des cours de soutiens, préparation aux examens d'électronique.... : IUT, BTS, EST, CPGE, UNIVERSITE, CYCLE D'INGENIEUR.

Je propose des cours en électronique, électrotechnique, automatique et électricité pour CPGE TSI, EST et BTS et des Ecoles d'ingénieurs.

Je dispose de tout les outils technologiques nécessaires pour donner des cours à distance et donc dispenser le cours dans d'excellentes conditions.

Méthode de travail :

Je fonctionne selon vos attentes puis je vous proposerez des cours plus ciblées pour combler vos lacunes.

1- Nous commençons par un rappel de cours en mettant l'accent sur les points clés.
2- Nous travaillons ensemble des exercices en lien direct avec le cours de la classe.
3- Nous abordons des exercices plus approfondis pour traiter les différents cas.

+ Electronique de puissance :
- Convertisseur statique DC/AC : Onduleur
- Convertisseur statique AC/DC : Redresseur
- Convertisseur statique DC/DC : Hacheur
- Convertisseur statique AC/AC : Gradateur

+ Electrotechnique:
- Machine à courant continu
- Variation de vitesse de la machine à courant continu
- Machine asynchrone.
- Variation de vitesse de la machine asynchrone
- Machine synchrone - Alternateur
- Transformateurs
- Régime monophasé et régime triphasé
- Energies renouvelables (solaire & éolienne)

+ Automatique :
- Automate programmable (Schneider et Siemens)
- Régulation industrielle
- Asservissement
- Microcontrôleurs

+ Electronique :
- Capteurs et détecteurs
- Amplificateurs opérationnels ALI
- Filtres analogiques : Filtrage
- Convertisseurs Analogique/Numérique CAN et CNA
- Systèmes logique combinatoires et séquentielles
- Modulation analogique (AM, FM, PM) et Modulation numérique (ASK, FSK, PSK, QAM)

+ Projets :
- Réalisation des projets à base d'arduino
- Simulations sur Proteus ISIS
- Réalisation des projets à base ESP8266 nodmcu ESP32

Marko

4.38

(8)

✅ Experienced teacher offering private online physics lessons for all levels.
✅ Fully dedicated and focused on student progress.
✅ Very patient, systematic, and organized.

I teach a wide range of topics in physics, including but not limited to:

5- Physical quantities and units
- Kinematics (types of motion, kinematics of point particles and rigid bodies)
- Dynamics (frictional and inertial forces, Newton's laws)
- Laws of conservation (energy, momentum)
- Theory of collision processes
- Inertial and non-inertial reference frames
- Potential and kinetic energy
- Gravitation and gravity fields
- Oscillatory and wave motions
- Harmonic oscillator
- Doppler effect
- Standing waves
- Sound waves and physical characteristics of sound
- Surface tension and capillary phenomena
- Fluid mechanics
- Temperature and heat
- Calorimetry
- Phase transitions
- Principles of thermodynamics
- Electrostatics
- Electromagnetism
- Kirchhoff's laws
- Electronic circuits
- Dielectrics
- Optics
... and much more.

If there are specific topics you would like to focus on or if you have any questions, feel free to let me know. I am here to help you deepen your understanding of physics.

Abdelali

4.38

(8)

Hello, I am an electrical engineer having an extensive experience as a professor in higher education in engineering science and electrical engineering, as well as great experience as an embedded systems engineer, in EE architecture, ADAS, Testing and validations in the automotive sector.

I offer support courses and training in engineering science subjects, particularly in Automation and Industrial Control, to graduate students. My methodology is based on the acquisition of knowledge and course concepts in a very simple manner and also on practical experience using the most widely used software on the market.

Automation is the discipline that, generally speaking, deals with the control of systems. It is therefore very important in the industrial field, to which it provides solutions, study methods, and systematic analysis approaches. It is a scientific discipline that studies dynamic systems, signals, and information for the purposes of control or decision-making.

This course consists of six chapters, divided as follows:

Chapter 1: Introduction to Automation & Controlled Systems
Chapter 2: Mathematical Modeling of Controlled Systems
Chapter 3: Time & Frequency Analysis of Controlled Systems
Chapter 4: Controlling Systems & Block Diagram Algebra
Chapter 5: Stability & Performance of Controlled Systems
Chapter 6: Correction and Regulation of Controlled Systems

Youssef

4.38

(8)

Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer for students of preparatory classes and technical high school support courses in the subjects of engineering sciences (Electronics, automatic, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism
Automatic
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python
PIC microcontroller
Microprocessor

These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Yassine

4.38

(8)

Are you looking to improve your skills in mathematics, physics or technical skills? I offer courses adapted to your level, whether you are in middle school, high school or even in higher education.

We will cover key concepts in a clear and structured manner to help you master the fundamentals, solve complex exercises and prepare for exams. Whether for support courses or to deepen your knowledge, I am here to guide you.

Nicolas

4.38

(8)

Des difficultés en physique ?
Je vous aide à comprendre les concepts clés et à résoudre les exercices avec méthode et confiance.

Résultats concrets

* Comprendre les lois essentielles (Ohm, Coulomb, Faraday...)
* Résoudre les exercices sans blocage
* Améliorer rapidement vos notes en physique
* Maîtriser les méthodes de résolution
* Appliquer les concepts à des cas concrets

Ma méthode

* Explications simples et structurées
* Exercices corrigés étape par étape
* Approche pratique et concrète
* Accompagnement personnalisé

Pour qui

* Lycéens et étudiants en sciences
* Élèves en difficulté en physique
* Toute personne souhaitant mieux comprendre l’électricité

Objectif

Vous rendre capable de comprendre et résoudre les problèmes d’électricité et de magnétisme de manière autonome.

Réservez votre première séance et progressez rapidement en physique.

Ossama

4.38

(8)

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School. I master the teaching of analog and digital electronics, covering components, integrated circuits and embedded systems.
- Fundamentals of electronics: Definitions, basic concepts, Kirchhoff's laws.
- Electronic components: Resistors, capacitors, inductors, diodes.
- Operational amplifiers: Operation, characteristics, applications.
- Basic analog circuits: Amplifiers, filters, oscillators.
- Introduction to digital electronics: Binary logic, logic gates, combinational circuits.
- Numbering systems: Conversion between bases, adders, subtractors.
- Transistors: Bipolar transistors, field effect transistors, characteristics, applications.
- Transistor amplifiers: Configuration, gain calculations, stability.
- Analog integrated circuits: Voltage regulators, A/D and D/A converters.
- Sequential digital systems: Flip-flops, registers, counters.
- Microcontrollers and microprocessors: Architecture, basic programming, interfaces.
- Analysis of electronic circuits: Frequency and time analysis methods.
- Advanced analog circuits: Differential amplifiers, power amplifiers, active filters.
- Modulation and demodulation techniques: AM, FM, PM.
- Embedded systems: Design of real-time systems, communication between peripherals.
- Test and measurement techniques: Oscilloscope, spectrum analyzer, signal generators.
-

Fatima

4.38

(8)

🚀 Do you finally want to understand electricity, electronics, or automation without stress? You've come to the right place!

👩‍🏫 I'm an electrical and renewable energy engineer and an experienced teacher. I'll guide you step by step, even if you're starting from scratch.

💡 My courses allow you to:
Understanding the basics of electricity

Master electronic circuits, control systems, and automatons

Learn at your own pace with concrete examples, diagrams, simulations and guided exercises

🧰 Content suitable for:
High school students / students in BTS, DUT, license, preparatory classes, engineering schools......

Students in retraining or self-taught

International students (courses available in French or English)

✅ What sets me apart:
Clear, progressive and caring approach

Support after the course if needed (questions, corrections, etc.)

Online or face-to-face courses

Fayza

4.38

(8)

This class is designed for beginners who want to start learning robotics in a simple and practical way.

Students will learn the basics of electronics, Arduino programming, sensors, motors, and how to build small real-world projects step by step. No advanced background is required.

The course focuses on hands-on learning: connecting components, writing Arduino code, understanding how robots work, and creating mini projects such as smart fans, automatic lights, and simple robots.

By the end of the class, students will understand how hardware and software work together and will be able to build their own basic robotic systems.

This class is suitable for students, hobbyists, and anyone interested in robotics and technology.

Elayachi

4.38

(8)

I offer mathematics, electronics and electrotechnical courses adapted to all levels: middle school, high school, preparatory classes, university, as well as for students in engineering schools or technical training.

With a solid background in teaching and a clear pedagogical approach, I help you understand fundamental concepts, progress quickly, and gain confidence.
Each session is structured, interactive and practice-oriented.
What I teach:

Mathematics: algebra, analysis, functions, differential equations, probability

Electronics: analog and digital circuits, components, fundamental laws

Electrical engineering: electrical machines, three-phase systems, transformers, power

Homework help, exam preparation, ongoing support

Detailed explanations, solved exercises, effective methods

Method of working :

Simple and progressive explanations

Practical exercises to reinforce understanding

Solving real-world problems

Clear visual aids and diagrams

Complete adaptation to the student's level and objectives

For who ?

Middle and high school students

Students in BTS, DUT, Bachelor's, Master's programs

Apprentice technicians or engineers

Anyone wishing to enhance their technical skills

Objective :
Helping you master essential concepts, improve your results and develop a solid and lasting understanding of scientific subjects.

Jean-François

4.38

(8)

A course for creators, artists, designers, and... anyone curious! Learn to manipulate and program Arduinos and other control boards, discover the sensor ecosystem, and implement motors, actuators, and lights. Start designing your own interactive systems!

Hejra

4.38

(8)

Professeur expérimenté propose des cours particuliers en mathématiques et physique pour collégiens et lycéens.

Je propose un accompagnement adapté pour :
revoir les bases et combler les lacunes
mieux comprendre le cours et les méthodes
aide aux devoirs et exercices
préparation aux contrôles, examens et au baccalauréat
amélioration du raisonnement et de la méthodologie
soutien personnalisé selon le niveau et les objectifs de l’élève
Ma méthode repose sur des explications claires, des exercices progressifs et un suivi personnalisé pour redonner confiance et permettre une progression durable.
Les cours peuvent se faire en ligne.

De plus

Ingénieur/enseignant expérimenté propose des cours particuliers en électrotechnique, machines électriques, électronique de puissance et automatique pour étudiants en c', IUT, licence et écoles d’ingénieurs.
Je vous accompagne pour :
compréhension du cours et renforcement des bases
aide aux TD, TP et projets
préparation des examens et rattrapages
machines électriques (transformateurs, machines asynchrones et synchrones)
convertisseurs statiques et électronique de puissance
automatique et commande des systèmes
instrumentation et mesures
Ma méthode est basée sur des explications claires, des exercices progressifs et une approche adaptée au niveau de chaque étudiant. L’objectif est de comprendre les concepts en profondeur et de gagner en autonomie.
Les cours peuvent être assurés en ligne