FavouritesAdd to Wish List
FavouritesAdd to Wish List
FavouritesAdd to Wish List
from37.90USD/ h

Static and mechanics of materials and structures, material science

I have a Ph.D in civil engineering and I have been teaching for 17 years. During 10 years, I was assistant in University for the classes of static and mechanics of materials, after 2014 I have been teaching in private.
I propose online classes where the student has an active role.

Location

Online via webcam

General info

Skills:
Age:
Adults (18-64 years old)
Seniors (65+ years old)
Student level:
Beginner
Intermediate
Advanced
Duration:
60 minutes
The class is taught in:English, French, Spanish, Italian

About Me

I have a Ph.D. in civil engineering and I have been teaching for 17 years. Teaching is my passion. For the first part of my career, I was assistant in University, for the second part I have been teaching in private to students from all over the world.

Education

Post doc: civil engineering (Crack propagation glass under stress corrosion)
Ph.D. : civil engineering
Master and bachelor diploma: Architecture
Teaching experience: 17 years

Experience / Qualifications

During my research experience, I studied the behavior of structural glass under loads and under the effect of environmental stress corrosion.

Ask a question

Send a message explaining your needs and Costanza will reply soon:
The more detail, the better.
Ex. "Hi, when are you available to meet for a lesson?"

Availability of a typical week

MonTueWedThuFriSatSun
7              
8  Monday at 8:00  Tuesday at 8:00  Wednesday at 8:00  Thursday at 8:00  Friday at 8:00    
9  Monday at 9:00  Tuesday at 9:00  Wednesday at 9:00  Thursday at 9:00  Friday at 9:00    
10  Monday at 10:00  Tuesday at 10:00  Wednesday at 10:00  Thursday at 10:00  Friday at 10:00    
11  Monday at 11:00  Tuesday at 11:00  Wednesday at 11:00  Thursday at 11:00  Friday at 11:00    
12  Monday at 12:00  Tuesday at 12:00  Wednesday at 12:00  Thursday at 12:00  Friday at 12:00    
13  Monday at 13:00  Tuesday at 13:00  Wednesday at 13:00  Thursday at 13:00  Friday at 13:00    
14  Monday at 14:00  Tuesday at 14:00  Wednesday at 14:00  Thursday at 14:00  Friday at 14:00    
15  Monday at 15:00  Tuesday at 15:00  Wednesday at 15:00  Thursday at 15:00  Friday at 15:00    
16  Monday at 16:00  Tuesday at 16:00  Wednesday at 16:00  Thursday at 16:00  Friday at 16:00    
17  Monday at 17:00  Tuesday at 17:00  Wednesday at 17:00  Thursday at 17:00  Friday at 17:00    
18  Monday at 18:00  Tuesday at 18:00  Wednesday at 18:00  Thursday at 18:00  Friday at 18:00    
19              
20              
21              
22              
23              
from $37.90Online via webcam

Good-fit Instructor Guarantee


If you are not satisfied after your first lesson, Apprentus will find you another instructor or will refund your first lesson.

Online reputation

  • Instructor since February 2021
  • Phone number verified
  • Linkedin connected

Availability of a typical week

MonTueWedThuFriSatSun
7              
8  Monday at 8:00  Tuesday at 8:00  Wednesday at 8:00  Thursday at 8:00  Friday at 8:00    
9  Monday at 9:00  Tuesday at 9:00  Wednesday at 9:00  Thursday at 9:00  Friday at 9:00    
10  Monday at 10:00  Tuesday at 10:00  Wednesday at 10:00  Thursday at 10:00  Friday at 10:00    
11  Monday at 11:00  Tuesday at 11:00  Wednesday at 11:00  Thursday at 11:00  Friday at 11:00    
12  Monday at 12:00  Tuesday at 12:00  Wednesday at 12:00  Thursday at 12:00  Friday at 12:00    
13  Monday at 13:00  Tuesday at 13:00  Wednesday at 13:00  Thursday at 13:00  Friday at 13:00    
14  Monday at 14:00  Tuesday at 14:00  Wednesday at 14:00  Thursday at 14:00  Friday at 14:00    
15  Monday at 15:00  Tuesday at 15:00  Wednesday at 15:00  Thursday at 15:00  Friday at 15:00    
16  Monday at 16:00  Tuesday at 16:00  Wednesday at 16:00  Thursday at 16:00  Friday at 16:00    
17  Monday at 17:00  Tuesday at 17:00  Wednesday at 17:00  Thursday at 17:00  Friday at 17:00    
18  Monday at 18:00  Tuesday at 18:00  Wednesday at 18:00  Thursday at 18:00  Friday at 18:00    
19              
20              
21              
22              
23              
from $37.90Online via webcam

Good-fit Instructor Guarantee


If you are not satisfied after your first lesson, Apprentus will find you another instructor or will refund your first lesson.

Share


Matías
Private lessons in math - physics - engineering
I am an aeronautical engineer and I am well aware of the frustration of not achieving the desired academic results. I was here. A lot of times. I find it very satisfying to teach and to see how my students achieve their goals. I sincerely believe that learning is a privilege and a pleasure. It is my top priority that my students feel this. My level of mathematics, physics and engineering is very competent. Although of course, for very specific topics or doubts, I will have to analyze whether I am able to teach lessons with ease or not. Do not hesitate to write to me. I am used to working with people of different ages. I believe in segmentation, visualization of progress, objective results and practice. For students who have difficulty I analyze the root of learning problems. And, above all, I try to motivate them. An ideal lesson time would be distributed as follows: 20 minutes question and answer and start from these gaps, 30 minutes to advance, 10 minutes lateral thinking. Beyond these general lines, there is no rule or magic method. Some things work with some students and not with others. Adapting to needs is really the goal of private lessons. So I will do my best to find what motivates and helps my student.

Šimon
Aerospace Engineering TU Delft - entrance exam preparation
As a third-year student at TU Delft's BSc Aerospace Engineering program, I have some experience with the curriculum of the course and the needed prerequisites. I can help you understand the topics you need to understand for your entrance exam, help you practice with some exercises, and tell you what to look out for. We can also talk about the program, whether it is a good fit for you, the opportunities available in Delft, and what to expect in your studies as well. I am looking forward to our classes!

Himank
Learn new crypto-currency Bitcoin, Ethereum from Zero to Advance level
Currently, I am working at MaaS department in Denso Corporation, Shinagawa, Tokyo. I have done my masters from Indian Institute of Technology Hyderabad India recently. I can teach you Blockchain, Bitcoin and Ethereum. During my masters at IIT, I have done my all research in Blockchain. This will bring some innovation in your life I can teach you coding, Science and Math if you wish to learn new things contact me. I little bit know Nihon-Go as well.

Christiane
Cours particulier de Grasshopper en français online
Je suis architecte, j'ai travaillé pendant 7 ans avec grasshopper sur des projet d'architecture, design d'intérieur et design de meubles. J'ai appris seule, à l'aide d'internet, je sais donc que c'est posible et je sais aussi que cela sue beaucoup beaucoup de temps, autant que de patience et de motivation. You know where the point joins the personalization permet de réduire drastiquement le temps de travail et d'apprentissage, although the frustration of ne pas trouver de réponse à mes questions. You know that you pour apprendre, il est essentiel d'avoir un objectif, un projet personnel, un idée concrète à matérialiser. C'est la meilleure façon de trouver la motivation et de permettre que connaissances perdurent dans el temps. Je donne les cours par skype, avec des fichiers partagés. If you were asked questions on a personal project or if you were initiated by the program shop, then you would not be disappointed.

Jean
Learn Python for scientific and engineering applications. All levels welcome!
Do you want to improve your productivity in class or at work? Are you tired of using Excel for things it's not meant for? Do you want to analyze and visualize your data? Do you want to generate valuable insights? Do you want to talk to sensors and devices? Then you've come to the right place. You don't need to want to become a developer in order to learn Python. Most people who program in Python actually work in another field, but use Python as a superpower to help them do their job more efficiently and effectively, or even do do things that were previously impossible. I will be teaching you one-on-one. We'll see what you want to do, and I help you work towards that goal. I will be using best practices as appropriate to your level. We might work with Jupyter notebooks if you have nothing more specific that you prefer to do. But I can also work with you on analyzing your data, controlling your devices and robots, or even building tools that you feel that you need. Depending on your application, we might even do some machine learning. Some case studies involving students of mine: In one case, I started by automating one report of a financial analyst who had never programmed before, allowing him to start learning Python on during working hours. I also automated one of his side jobs, giving him more disposable income. He has since automated many more of his tasks, and has been providing completely new insights to his company, This has earned him a promotion and a sponsored masters degree. I still provide support as necessary. In another, I enabled a PhD student to analyze their electron-phase micrographs by writing software with them which did the job of commercial software with an expensive license. I was acknowledged by name in their paper. Note: Python 3 only, unless you are required to use Python 2.

Abdelali
Linear automatic: servo-control and industrial regulation
Hello, I am an engineer and doctor in electrical engineering and professor of higher education in engineering sciences, experienced in the field of electrical engineering, I offer for graduate students support courses and training in the subjects engineering sciences, particularly in Automation and industrial regulation. My methodology is based on the acquisition of knowledge and course concepts in a very simple way and also on practice using the most widely used software on the market. Automation is the discipline which, in general, deals with the control of systems. It therefore takes on a very important character in the industrial field to which it provides both solutions, study methods and systematic analysis approaches. It is a scientific discipline that studies dynamic systems, signals and information, for the purpose of driving or making decisions. This course is made up of 6 chapters divided as follows: Chapter 1: Introduction to automation & servo systems Chapter 2: Mathematical modeling of SLCIs Chapter 3: Time & frequency analysis of SLCIs Chapter 4: Command of SLCIs & algebra of block diagrams Chapter 5: Stability & performance of SLCIs Chapter 6: Correction and regulation of servo systems I also give courses and training in: Electrical and electronic circuits Automatic Industrial regulation Signal processing C / c ++ programming, Assembler, PIC, Arduino Matlab LabVIEW PIC microcontroller Microprocessor

Abdulkadir
Aeronautical engineering for beginners ,Math and Physics for high school
I am a Master of energy science and technology Engineering Student and I have completed my bachelor's degree in the field of aeronautical engineering. During my studies ı had a chance to enroll in both the Erasmus education and internship program. Also, we HAve won several design competitions such as flying car concept design and helicopter design. I would like to help those who study engineering and passion for aircrafts also energy-related fields. High School math and physics are also welcome. Thanks for your time Regards

Mahmoud
Architecture: Photorealistic 3D rendering on Lumion / Enscape / Vray (Sketchup, Rhino, or Revit interface)
Tutor: Mahmoud Ramdane Computational architect and designer. Teacher of digital strategies for interior designers @ Artcom. Seminar assistant at the National School of Architecture. Student at the Barcelona Institute of Advanced Architecture in Computational Strategies.

Kinta
Structural Design and Detailing for Structural Engineers
Structural Engineering is an important course in constructing new buildings, checking for their maintainance, safety of users, and realization of a client's dream. For those interested in Structures or already working as structural engineers, this course will immensely add value to sharpening your DESIGN skills in Reinforced Concrete, Steel and Timber according to American, NBCC, Eurocodes or British Standards. Entire courses are available for complete design of structures and making a Structural report for each project. CAD SOFTWARE is so important for communicating what an Architect or Engineer designs for new construction / maintenance of structures. There are full courses for 1. Revit Architecture 2. Staad Pro. 3. AutoCAD 4. SketchUp

Sara
AutoCAD course - architecture software - design - creation
AutoCAD can design any 2D drawing and any 3D model or construction that can be drawn by hand, the program also allows the user to group or overlap objects, keep the objects in a database for later use and manipulate the properties of objects, such as their size, shape and location. This course will guide you through the creation process from A to Z. If you are thinking of studying architecture or an engineering background, this course will make it easier for you to illustrate your plans and ideas. Please feel free to call or email me with any questions regarding this course.

Abdi
Interior Architecture, Interior Design, Vectorworks tutor
My name is Abdi and i have been teaching interior architecture and general design lessons for several of years. I have graduated from University of Westminster (Interior Architecture - 1st Class Honours) in 2013. I am comfortable teaching College and University students as well as adults looking to enter the interior design profession. I understand as creative individuals, we all process information differently, therefore my teaching methods will be tailored to your requirements. The lessons time slots will also be scheduled around your availability. I am comfortable with the follow softwares: - Vectorworks - Photoshop - Indesign

Marwa
Experienced Mathematics and Physics teacher, with 18+ years of experience.
A Experienced teacher for Physics and Mathematics IGCSE, EDEXCEL, A LEVELS, IB, SAT. A university lecturer in college of Engineering. Looking forward to meet my students. You will get to understand the concepts very well, learn, practice and excel.

Romain
Learn parametric design with Grasshopper in Rhino3D!
Civil engineer with an architecture orientation, I can help you create the programs that will allow you to model parametrically with grasshopper! Grasshopper, under rhino 3D, is a great tool for automated modeling. If you know this program, you know that at first the bugs take a long time to resolve. No problem! My hundreds of hours spent programming will help you finalize your projects.

Antoine
Science courses (Mathematics, Physics or engineering sciences)
As a former student of SSI terminal then of PCSI preparatory class then PSI *, having received an admission to the CentraleSupelec school, I have a very good scientific basis. I can therefore give courses in the 3 main sciences concerning me being math, physics and engineering sciences up to a level of first year of PCSI preparation.

Emma
Cours particuliers matières scientifiques (mathématiques, physique, sciences de l'ingénieur) collège / lycée
Je m'appelle Emma, j'ai 21 ans et je suis étudiante en école d'ingénieur en spécialité aéronautique. Je donne des cours de soutiens en matières scientifiques (mathématiques, physique, sciences de l'ingénieur) et en langues vivantes (anglais, espagnol) principalement mais si l'étudiant a besoin d'aide sur d'autres matières je peux me pencher sur le problème. Le déroulement de la séance et la méthodologie privilégiée seront les suivants : - Parcours du cours théorique avec l'élève pour repérer les incompréhensions et lacunes ; - Première synthèse pour mettre en avant l'important et aider l'élève à construire une première fiche (si le cours s'y prête) ; - Exercices d'application du cours et problèmes, montrer le raisonnement et débloquer l'élève si difficultés ; - Organisation d'un planning de révisions en vue des examens ou concours. Bien évidemment selon le profil de l'élève, cette méthode sera adaptée pour mieux correspondre à sa méthode d'apprentissage. Je sors tout juste de ma 4ème année en école d'ingénieur et j'entame une année de césure pour l'année scolaire 2021-2022, ce qui me laisse assez de temps libre que je veux mettre à profit et me permet d'être assez flexible sur les horaires et dates des séances.