SamPRIVATE LESSONS ELECTRONICS MATHEMATICS PHYSICAL (lessons, exercises, corrected exams)
Professor in mathematics, computer science at HEFF in Brussels and before a professor of electronics at IEPSCF, NGÉNIEUR in electronics ECAMIEN of basic diploma in mathematics-physics and I propose an individualized pedagogy, an aid to the preparation of the interrogations or exams. My goal is to advance the student without overloading him. I give homework after each lesson and periodically provide progress reports
I strongly encourage the student because the state of mind and morale have a direct influence on school results.
I am someone understandable and I always try to take each one in his own way.
I always start by clarifying the course after giving an example then give an example to the student to do a full exercise and finally correct a review together generally it's methodology but it can change from one case to another.
Houssem EddineA Math teacher gives courses in Maths, Algebra, Geometry and Electricity.
An experienced teacher at your disposal for:
- Methodology adapted to all levels.
- Consolidation of achievements.
- Preparation for an examination / competition (CEB, CE1D, CESS.etc).
- Help with homework and lessons.
- Complementary exercises and review as controls and exams approach.
- Advice and supervision at the level of working methods.
- Recommended teaching methods.
Currently, I am doing my maths aggregation. I am already an electromechanical engineer, graduated as a senior technician in electronics and electrical engineering and who passed my bachelor's degree in mathematics with honors. I teach in different technical fields and especially mathematics, algebra and electronics.
At the level of my teaching methods, I use those that are advised pedagogically, I always try to explain and detail as much as possible the courses and I do not pass to the following stages until after making sure that the student understood what I explained.
As a teacher, I already have a good teaching experience with students since 4 years. What is certain, I make sure to always go as far as possible to explain the exercises.
ChristopheMathematics, geometry, drawing, mechanics, 3D imaging and computer courses
Working part-time in the watch industry, I have been tutoring for several years in the context of refresher, one-off support or preparation of exams or competitions. Very experienced in relation to the difficulties encountered by students and pedagogue, I adapt to everyone's needs in order to quickly regain the necessary confidence, the methodology of mathematical reasoning and thus allow rapid improvement of results.
Experienced and pedagogue, I adapt to the needs of the student to help him consolidate his knowledge methodically, to regain confidence and improve as quickly as possible its results. I teach these courses in a radius of 30 km around Geneva.
AndreeaRobotics Basics and more (what they are and what they can do)
Robotics is the future! Yet it is overwhelming to see how many people still have misconceptions on this subject. I consider it extremely important to educate people in this regard. Not only the background, but also hands on
exercises on how robots work, what they can actually do, and what people are currently using them for.
I have been working as a student teacher of Universal Robot programming for first year university students. It has been a great pleasure to share my knowledge and see how young people like myself, get excited about this subject!
AnasComprendre Conception Assistée par Ordinateur (CAO, CATIA, SOLIDWORKS,INVENTOR...)
Apprenez à dessiner des CAD ou à devenir un pro dans Solidworks et Catia. Il présente de nombreux avantages pour les débutants et pour les (semi) professionnels qui ont déjà démarré une entreprise. Vous cherchez un travail de designer. La plupart des grandes entreprises industrielles travaillent avec Solidworks et Catia. Maintenant, vous aussi!
Tout d'abord, vous apprendrez les bases de ce programme de manière efficace et amusante. Vous apprendrez tous les outils dont vous avez besoin et obtiendrez des conseils d'experts pratiques pendant le cours! Donc, après ce cours, vous aurez les compétences et la confiance nécessaires pour commencer à travailler le travail de vos rêves!
Aucune expérience requise, nous partons de zéro - étape par étape, je vais vous guider à travers ce programme incroyable!
Je suis ingénieur en mécanique travaillant avec plusieurs personnes dans l'industrie. En tant que professeur, j'ai travaillé avec beaucoup de personnes, où j'ai enseigné Solidworks et Catia, ainsi que des cours particuliers à de (jeunes) professionnels et étudiants en Europe / Chine.
Pour information, ou si vous avez des questions, n'hésitez pas à me contacter! Les cours sont en anglais ou en français.
NikhilApplied Physics, Applied Mathematics, Mech Engg and Solar energy
In mathematics, you can learn basic geometry, algebra to applied mathematics level. (Calculus, differential equations, etc.)
Similarly in Physics, you can expect right from basics to advanced level, as I have a degree in Mechanical engineering.
Engineering subjects like heat transfer, thermodynamics etc.
My masters is in Photovoltaic systems (solar energy). Any guidance, help in this field can also be provided.
JaiganeshOne line Electronics & Computer Engineering Subject Tutor in bahrain with 24/7 Services
Experience: 18 Years University Professor
Subjects handled / Familiar :
1 Microprocessor & Microcontroller,
2 Embedded Systems
3 Microwave Engineering,
4 VLSI System Design
5 Digital Electronics,
6 Linear Integrated Circuits
7 Electromagnetic Field
8 EM Waves and Waveguides
9 Electronics Circuits
10 Communication Systems
11 Pulse and Digital Circuits.
12 Mobile Communication
13 Communication Networks
Kindly contact me if you doubt in above subject mail me.
i teach any subject from basic level so that students can understand it completely meanwhile i am capable to teach simple as well as standard methods according to student's Telpone 382x123x07 in bahrain
EmilyComputer Training by Masters Graduates from international universities for all age groups
We provide online computer programming and graphic design training. Industry certificates will be provided at the end of each course. All our trainers hold a Masters in IT or Doctorate degrees in computer science from international universities and speak English and Indonesian.
High-quality training to help improve Mathematics, English, and Computer skills. All courses can be conducted both in English or Indonesian.
Docentron Certificate Courses:
Mobile application programming
Artificial Intelligence programming
MhairiUniversity Level Engineering - Study Support for 1st to 3rd Years
Lecturer talking too fast? Or just not explaining things properly? Need something broken down into easy steps? I'm here to help!
From Thermodynamics to Material Engineering, let me know what you need help with and we can set up a customised lesson. I'm also happy to cover Engineering Maths.
With hard work and a lot of studying, I have recently graduated with a Master in Mechanical Engineering with Distinction. I achieved As in every module, bar one, and achieved this by gaining a really good understanding of each subject.
MatíasElectronics, programming and robotics with ARDUINO
ARDUINO is a free hardware microcontroller. It is very useful for learning electronics and coding at the same time. It is very estimating thanks to that we can solve problems and look at the results physically.
I am used to working with people of different ages.
I cross in segregation, visualization of progress, objective results and practice.
KaranEngineering for Degree/Professional Level Engineers
A master’s graduate with First Class Honours in Advanced Mechanical Engineering from University of Leicester. Since, I completed my course in September 2019. I have worked as a Teaching Assistant in the department of engineering. I was trained and certified to teach in higher education from Leicester Learning Institute. I have assisted in demonstrating mechanical oriented first year labs concerning flow measurements in pipes, and electrical oriented labs based on circuit design and analysis using PSpice. Also, assisted in second year labs helping students to learn about material selection in electromechanical devices using CES Edupack software, as well as different engineering materials micro structural properties and processing. Furthermore, I have helped in for fourth year module involving conceptual design process for turbofan engines with improvements in aero engine design configurations. Overall, my aspects of teaching involved concepts related to designing, modelling, real life applications, mathematical calculations, physical and chemical sciences.
As a tutor, I would like to give my best abilities to improvise any individuals knowledge and make sure that they succeed in each & every aspects. At the same time, my commitment to teach with supporting and delivering the learning materials with at most reliability will always be my utmost priority. I will give what it takes to make an individual completely transformed into a knowledgeable individual. I believe one becomes intelligent by not just learning the concepts, but making the best use of it by applying in the real world.
SamiUniversity courses Help in the Filed of Electrical and Electronics Engineering
This class is for help in any module in the field of Electrical Engineering, control and Electronics. if you need any help in your bachelor courses, this class is for you.
What I can teach:
-Basic Electrical circuit courses
-Analog / digital Electronics
-Control theory ( Analog or digital )
-Signals and Systems.
And much More!
feel free to text me :)
شمسAutocad transmission mechanics course. Solidworks .. Fast .. Drawings ... Rdm ..
I teach For technical baccalaureate or 3rd technical students:
Course to my destination
Prices vary according to level.
Everything concerning the Tunisian program of the technical sciences section
GastonONLINE MATHS course for 10-20 year olds
Currently studying in 4th year at Polytechnique Montreal in mechanical engineering, I can give math lessons to students of all levels (from small school to CEGEP / high school / college).
The lessons are done online on the platform of your choice.
I can gladly help with the preparation for exams (like the BAC or other).
I am an educator and I like helping students understand and solve problems. I am used to working with children of all ages.
Do not hesitate to contact me ! :)
AlexandrosMechanical Engineering lessons for Greek Technical High School Students
Having several years of educational experience in classrooms of Technical High Schools, I have developed the skills needed to communicate effectively with students, understanding their needs and helping them achieve their academic goals. I have experience with adult classes too.
I can work with beginners but also with advanced students who are interested in the field of Mechanical Engineering. This class aims to introduce you to both theoretical and more practical problem solving techniques needed as an aspiring engineer. Progress is measured periodically via creative homework that aims to keep your interest up.