Translated by Google
Digital modeling and simulation for engineers
From 22.79 $ /h
Mechanical Engineer graduated from INSA Lyon gives courses to teach students how to carry out digital modeling and simulations as part of higher engineering studies. Whether for power transmission, material resistance, vibration and acoustics, solid dynamics, structural mechanics, heat transfer and fluid mechanics, the objective is to teach student how to take charge and thus master software, such as ANSYS, ABAQUS FEA, COMSOL Multiphysics, STAR CCM+, MATLAB and ARTEMIS, which allow engineering students to carry out case studies and projects in the field of elements and finite volumes or using numerical schemes and the finite difference method.
I have sufficient experience in numerical modeling and simulation applied to various engineering cases such as:
1. Thermal analysis of CubeSat
2. Thermal study of heat-reflecting paint
3. Study of fluid mechanics in agitation and mixing
4. Fluid mechanics study of an inclined skate
5. Acoustics analysis of various sounds
6. Vibration analysis of structures
7. Analysis of bearings and their vibration due to present defects
8. Simulations of transmission errors in gears
9. Modeling contacts in gears
10. Hertz theory
11. Study of Friction and Lubrication of an air thrust bearing
12. Thermoelasticity simulation
13. Simulation in Structural Calculation
14. Simulation of static resistance of a car
15. Simulation of mechanical resistance of beams
I have sufficient experience in numerical modeling and simulation applied to various engineering cases such as:
1. Thermal analysis of CubeSat
2. Thermal study of heat-reflecting paint
3. Study of fluid mechanics in agitation and mixing
4. Fluid mechanics study of an inclined skate
5. Acoustics analysis of various sounds
6. Vibration analysis of structures
7. Analysis of bearings and their vibration due to present defects
8. Simulations of transmission errors in gears
9. Modeling contacts in gears
10. Hertz theory
11. Study of Friction and Lubrication of an air thrust bearing
12. Thermoelasticity simulation
13. Simulation in Structural Calculation
14. Simulation of static resistance of a car
15. Simulation of mechanical resistance of beams
Extra information
Each student must have their own computer and software installed on it. Classes will be taught by videoconference.
Location
Online from France
About Me
I am an INSA Lyon mechanical engineer having done a Bachelor's and a Master's degree in Advanced Numerical Modeling and Simulation. I am an engineer very passionate about learning and deepening my knowledge in numerical modeling as well as very enthusiastic about teaching them to students. I am a very optimistic and patient person in life.
Education
A Levels: Mathematics (A+), Physics (A+) and Chemistry (A+)
Grande Ecole Engineering Preparatory Classes
Bachelor's degree in Mechanical Engineering
Master's degree in Advanced Experimentation, Modeling and Simulation in Mechanical Engineering
Grande Ecole Engineering Preparatory Classes
Bachelor's degree in Mechanical Engineering
Master's degree in Advanced Experimentation, Modeling and Simulation in Mechanical Engineering
Experience / Qualifications
Internship in the field of road construction
Internship in agitation and mixing
Internship in the thermal insulation of aerogel paints
Internship in agitation and mixing
Internship in the thermal insulation of aerogel paints
Age
Teenagers (13-17 years old)
Adults (18-64 years old)
Student level
Beginner
Intermediate
Advanced
Duration
60 minutes
120 minutes
The class is taught in
French
English
Skills
Availability of a typical week
(GMT -05:00)
New York
Mon
Tue
Wed
Thu
Fri
Sat
Sun
00-04
04-08
08-12
12-16
16-20
20-24
Good-fit Instructor Guarantee