Circuit Theory Analysis, Basic and Advanced topics in Electronic

Àpd 6.98 € /h

I have 4 years of experience teaching
you will learn the basics of circuit theory analysis.
operation of semiconductors and their related devices such as Diode, MOSFET, and BJT, and their related applications.
verify your study with CAD tools such as Multisim, Altium, Proteus, ORCAD, and LT Spice.
teaching advanced Courses in Mixed Analog and Digital IC design using Cadence Virtuoso tools and teaching Layout with DRC, LVS, and PEX.
previous experience in Cadence are Design high-Speed Current steering DAC, Flash ADC, and low noise Biopotential Amplifier Using the chopper technique.

Lieu

En ligne depuis Égypte

Présentation

I have good experience of three years of teaching Circuit Theory and Basic electronic Devices such as Diode, MOSFET, BJT, Op-Amp, Differential pair, Current Mirror, and Oscillator topics such as Harmonic oscillator and multivibrator. Also related topics such that Feedback, frequency response, and noise analysis.

I have good experience in CAD tools such that Altium, protus, Multisim, OR CAD, and LT spice.
I graduated from the Department of communication and Electronics and Mastered analog and Digital (Mixed) IC circuits and Master Cadence Virtuoso software and VLSI Layout.

Education

graduated from telecomunication and electronics department.
Master degree in Mixed analog and Digital IC Design (Design High speed Current Steering DAC)
GPA: 3.2

Expérience / Qualifications

Experience of 3 years in online teaching of the following courses:
Circuit Theory.
Electronics I,II.
Logic Gates.
Analog IC.
DSP.
Analog Communication.

Age

Adolescents (13-17 ans)

Adultes (18-64 ans)

Seniors (65+ ans)

Niveau du Cours

Débutant

Intermédiaire

Avancé

Durée

60 minutes

90 minutes

120 minutes

Enseigné en

anglais

arabe

Compétences

Circuits electroniques

Télécommunications

Disponibilité semaine type

(GMT -05:00)

New York

Cours par webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

François

4.38

(8)

Civil engineer, with extensive experience in individual training, gives:

>Maths, physics, chemistry, statistics, algebra, geometry, analysis
>Electricity, automatic, electronic

For secondary level up to master.
I illustrate the theory on the basis of concrete examples thanks to my experience in the business environment.

Rym

4.38

(8)

Doctor of Physics, teacher for more than 18 years, I support students in scientific preparatory classes (MPSI, PCSI, PTSI, MP, PSI, TSI, Medical Prep, etc.) to master physics in depth and to succeed in their competitive exams.

My approach is based on a rigorous methodology, a detailed analysis of blockages and a tailor-made progression adapted to each student, whether it is to consolidate the basics or achieve excellence.

🎯 What I offer

-Methodical work on understanding fundamental concepts
-Intensive training in solving exercises and competition-type subjects
-Detailed analysis and correction of copies
-Scientific and mental coaching for stress and time management
-Personalized support according to the program (French or Tunisian)

👩‍🏫 Course

-Doctor of Plasma Physics
-DEA and Masters in Fundamental Physics
-Former teacher in preparatory classes and at the Faculty of Medicine of Sfax
-Experience at Paris 11 University
-More than 15 years in higher education and 5 years in French high schools

💻 Terms and Conditions

-Online courses (Zoom, Google Meet, graphics tablet)
- Face-to-face courses by appointment in Tunis
- Personalized support, standard corrections, weekly monitoring

🚀 Objective

Enable each student to understand, reason and perform with confidence.
Rigor, method and requirement... without ever losing the pleasure of science.

Matías

4.38

(8)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Ahmed

4.38

(8)

Professeur agrégé en Sciences Industrielles de l’Ingénieur et Ingénierie Electrique, et Ingénieur d'état en génie électrique. Disponible pour des cours de soutiens, préparation aux examens d'électronique.... : IUT, BTS, EST, CPGE, UNIVERSITE, CYCLE D'INGENIEUR.

Je propose des cours en électronique, électrotechnique, automatique et électricité pour CPGE TSI, EST et BTS et des Ecoles d'ingénieurs.

Je dispose de tout les outils technologiques nécessaires pour donner des cours à distance et donc dispenser le cours dans d'excellentes conditions.

Méthode de travail :

Je fonctionne selon vos attentes puis je vous proposerez des cours plus ciblées pour combler vos lacunes.

1- Nous commençons par un rappel de cours en mettant l'accent sur les points clés.
2- Nous travaillons ensemble des exercices en lien direct avec le cours de la classe.
3- Nous abordons des exercices plus approfondis pour traiter les différents cas.

+ Electronique de puissance :
- Convertisseur statique DC/AC : Onduleur
- Convertisseur statique AC/DC : Redresseur
- Convertisseur statique DC/DC : Hacheur
- Convertisseur statique AC/AC : Gradateur

+ Electrotechnique:
- Machine à courant continu
- Variation de vitesse de la machine à courant continu
- Machine asynchrone.
- Variation de vitesse de la machine asynchrone
- Machine synchrone - Alternateur
- Transformateurs
- Régime monophasé et régime triphasé
- Energies renouvelables (solaire & éolienne)

+ Automatique :
- Automate programmable (Schneider et Siemens)
- Régulation industrielle
- Asservissement
- Microcontrôleurs

+ Electronique :
- Capteurs et détecteurs
- Amplificateurs opérationnels ALI
- Filtres analogiques : Filtrage
- Convertisseurs Analogique/Numérique CAN et CNA
- Systèmes logique combinatoires et séquentielles
- Modulation analogique (AM, FM, PM) et Modulation numérique (ASK, FSK, PSK, QAM)

+ Projets :
- Réalisation des projets à base d'arduino
- Simulations sur Proteus ISIS
- Réalisation des projets à base ESP8266 nodmcu ESP32

4.38

(8)

Engineer in engineering sciences option electrical engineering
Senior professor of engineering sciences

SKILLS
IS engineering sciences
Embedded system (microcontrollers, z80 microprocessors, Motorola, ARM), Real-time system, network concept (OSI, TCP/IP), design of systems and electronic cards (analog, digital, power supply), signal processing, communication protocols ( SPI, I2C, CAN BUS, UART...), telecommunications.

Technical skills :
Languages: C / C ++, JAVA, VHDL / VERILOG, Python, Assembler.
Professional software:
MATLAB, SIS + PSIM + PSpice, QUARTUS, IDE68, Mikro C, Xilinix ISE, Labview, CoIDE.
Technologies:
Siemens PLC, Allen bradeley, STM32, FPGA, TIA Portal, STEP7, RSLogix

 Electrical engineering: Electric motors, Transformers
 Renewable energies: study of the solar pumping installation and the wind turbine installation.
 Electronics: analog, digital, power electronics, system electronics and instrumentation
biomedical.
 Networks and telecommunications.
 Industrial IT and programmable logic controllers.
 Automatic: modeling, identification and control of systems.
 Mechatronics.
 MATLAB
• Noise and vibration of asynchronous motors
• Speed variator
• Study and implementation of LV / MV standards
• Electrical accreditation: NF C18-510 standard
• NF C 15-100 electrical installations
• Management of electrical energy in networks (Continuous Power Flow)

Marko

4.38

(8)

✅ Experienced teacher offering private online physics lessons for all levels.
✅ Fully dedicated and focused on student progress.
✅ Very patient, systematic, and organized.

I teach a wide range of topics in physics, including but not limited to:

5- Physical quantities and units
- Kinematics (types of motion, kinematics of point particles and rigid bodies)
- Dynamics (frictional and inertial forces, Newton's laws)
- Laws of conservation (energy, momentum)
- Theory of collision processes
- Inertial and non-inertial reference frames
- Potential and kinetic energy
- Gravitation and gravity fields
- Oscillatory and wave motions
- Harmonic oscillator
- Doppler effect
- Standing waves
- Sound waves and physical characteristics of sound
- Surface tension and capillary phenomena
- Fluid mechanics
- Temperature and heat
- Calorimetry
- Phase transitions
- Principles of thermodynamics
- Electrostatics
- Electromagnetism
- Kirchhoff's laws
- Electronic circuits
- Dielectrics
- Optics
... and much more.

If there are specific topics you would like to focus on or if you have any questions, feel free to let me know. I am here to help you deepen your understanding of physics.

Youssef

4.38

(8)

..................................... (satisfied or refunded)........ .......
Electrical engineering expert
PhD student in electrical engineering and renewable energies
engineer in electrical engineering and industrial computing
I offer home schooling courses to deal with the difficulties encountered by students during their schooling,
These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.
===Automatic (Servo-control and automatism regulation (discrete, continuous)========
===Electrical engineering (electrical machines) and power electronics (inverter rectifier)=======
===Continuous and sampled signal processing=================
===VHDL programming, microcontroller and microprocessor (intel, ARM)============
===High frequency electronics (transistor, diode, AOP, noise)============
===Propagation of electromagnetic waves and antennas========
===Analog and digital electronics (filters, flip-flops, sysml,Grafcet,amplifier)=====
=== Realization of electrical projects
===MATLAB ARDUINO Proteus ISIS
=== Renewable energies

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This pedagogical approach is effective since it has often led me to interesting results with my students.

Abdelali

4.38

(8)

Hello, I am an electrical and electronic engineer with extensive experience as a professor in higher education in engineering sciences and electrical engineering, as well as a rich experience as an embedded systems engineer, in EE architecture, ADAS, Testing and validation in the automotive sector.

I propose for the students of the higher cycle a supervision and an accompaniment until the realization of their projects or mini projects in electronics, signal processing, regulation and enslavement... using languages and software such as: Matlab / Simulink, Python, LabVIEW, ISIS Proteus, Arduino...

I also give courses and training in:

Embedded systems, ADAS systems and automotive engineering
Electrical and electronic circuits
Automatic
Industrial regulation
Signal processing
C Programming, Assembler, PIC, Arduino
PIC microcontroller
Microprocessor

Yassine

4.38

(8)

Discover the world of robotics, electronics, and programming with a course designed for technology and innovation enthusiasts. Whether you are a beginner or already have some basics, this course will guide you through the fundamentals, with a hands-on approach to designing your own projects. You will learn how to use electronic components, program microcontrollers, and assemble robots to perform autonomous tasks.

Ossama

4.38

(8)

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School. I master the teaching of analog and digital electronics, covering components, integrated circuits and embedded systems.
- Fundamentals of electronics: Definitions, basic concepts, Kirchhoff's laws.
- Electronic components: Resistors, capacitors, inductors, diodes.
- Operational amplifiers: Operation, characteristics, applications.
- Basic analog circuits: Amplifiers, filters, oscillators.
- Introduction to digital electronics: Binary logic, logic gates, combinational circuits.
- Numbering systems: Conversion between bases, adders, subtractors.
- Transistors: Bipolar transistors, field effect transistors, characteristics, applications.
- Transistor amplifiers: Configuration, gain calculations, stability.
- Analog integrated circuits: Voltage regulators, A/D and D/A converters.
- Sequential digital systems: Flip-flops, registers, counters.
- Microcontrollers and microprocessors: Architecture, basic programming, interfaces.
- Analysis of electronic circuits: Frequency and time analysis methods.
- Advanced analog circuits: Differential amplifiers, power amplifiers, active filters.
- Modulation and demodulation techniques: AM, FM, PM.
- Embedded systems: Design of real-time systems, communication between peripherals.
- Test and measurement techniques: Oscilloscope, spectrum analyzer, signal generators.
-

Rachid

4.38

(8)

En tant que professeur et ingénieur spécialisé en génie électrique, j'adopte une approche personnalisée et interactive de l'enseignement. Mon approche se caractérise par les éléments suivants :
🟦 Création d'un environnement d'apprentissage favorable, où vous vous sentez à l'aise pour poser des questions et explorer en profondeur les concepts électriques.
🟦 Partage de savoir au moyen d'exemples concrets et de démonstrations pratiques.
🟦 Objectif visant à favoriser une compréhension approfondie chez vous, tout en vous préparant efficacement aux examens et vous aidant à faire vos devoirs et vos projets.

Domaines de Compétences & Matières Enseignées

Je propose des cours approfondis couvrant les principaux piliers du génie électrique :

🟠 Électrotechnique : Machines électriques, transformateurs (monophasés et triphasés), énergies renouvelables (solaire et éolien).

🟠Électronique de Puissance : Convertisseurs statiques (Redresseurs, Hacheurs, Onduleurs, Gradateurs).

🟠Automatique et Asservissement.

🟠Automatisme et systèmes embarqués.

🟠Électronique Analogique & Numérique : Logique, filtres, amplificateurs, etc.

🟠Capteurs et Détecteurs.

🟠Télécommunications : Modulation analogique (AM, FM) et numérique (ASK, FSK, PSK).

🟠Traitement du signal

🟠Aide aux Projets & Maîtrise Logicielle:
Je vous accompagne activement dans la réalisation de vos projets, notamment : conception et programmation sur microcontrôleurs (Arduino, ESP32, etc.).
Simulation et modélisation sous Proteus ISIS et MATLAB/SIMULINK.

Abbass

4.38

(8)

This course provides a clear and engaging introduction to Signal Processing, with a balanced mix of theory and practical applications. Students will learn how signals are generated, analyzed, transformed, filtered, and processed in real-world systems. The course adapts to the student’s level, whether beginner, intermediate, or advanced.

Through interactive lessons, you will explore both continuous-time and digital signal processing (DSP) concepts, supported by hands-on exercises using MATLAB or Python (based on student preference). Real applications in audio, communications, IoT, biomedical, and image processing can be integrated depending on your goals.

Electronics and Arduino programming are essential skills for anyone interested in embedded systems and smart projects. In this course, you’ll learn how to understand electronic components and how to program Arduino boards to bring your ideas to life. The course is designed as a practical and beginner-friendly guide to electronics and Arduino, with hands-on examples and real applications.

You’ll learn how to work with sensors and actuators, read schematics, write and debug Arduino code, and build interactive projects such as LED systems, motor control, and basic IoT applications. By the end of the course, you’ll have the confidence to design, build, and program your own electronic projects.

Abdallah

4.38

(8)

I offer online tutoring in High School Mathematics & Physics, University Electronics/Electronic Circuits, and Turkish language.
Lessons are structured, clear, and focused on understanding + practice, with personalized plans, step-by-step solutions, and regular feedback.