Mastering Finite Element Software ANSYS/ABAQUS for Engineers

Van 50.56 $ /h

This in-depth course is designed for engineers who want to master the use of leading finite element software—ANSYS and ABAQUS. Participants will learn advanced simulation techniques to solve complex engineering problems in structural, thermal, and dynamic analysis. By the end of the course, engineers will be equipped with the knowledge and hands-on experience needed to effectively model, analyze, and optimize engineering systems.

Key Learning Objectives:
_ Understand fundamental concepts of Matring analysis in ANSYS/ABAQUS.
_ Learn to model nonlinear material behavior and interactions.
_ Master techniques for simulating complex loading conditions.
_ Gain proficiency in interpreting and validating simulation results.

Locatie

Online vanuit Marokko

Over

Online Lessons! Is it your dream to do well in "math, physics and Engineering science'' but you are on the other side of the country? No problem. Now, you can meet me online on your smartphone or using a webcam on your computer. The world is your classroom!

Each lesson is customized to help you grow. Learn faster and easier than ever with personal attention from an expert instructor.

I am a PhD Engineer in engineering science, I offer support throughout the year in mathematics, physics and engineering science, home support to achieve good results. in groups or individually. My courses focus on courses and tutorials that apply the knowledge learned during the theoretical courses.

Opleiding

PhD in Engineering Sciences
University of Mohamed V in Rabat, Morocco (2018-Present)

Engineer in Mechanical Engineering
University of Mohamed V, ENSAM, Rabat, Morocco (2012-2017)

Baccalaureate of Science (2012)

Leservaring

Teaching "math, physics and Engineering science'' as a private tutor for the past 5 years. I have taught student of all ages.

Leeftijd

Volwassenen (18-64 jaar oud)

Senioren (65+ jaar oud)

Niveau van de leerling

Beginner

Gemiddeld

Gevorderden

Duur

60 minuten

120 minuten

De les wordt gegeven in

Frans

Engels

Arabisch

Vaardigheden

Structurele ingenieurstechnieken

Ingenieurswetenschappen

Numerieke analyse

Beschikbaarheid typische week

(GMT -05:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Details of courses in physics and mathematics (Lycée et Supérieure)

30.83 $ /h

Bonjour, I am a doctoral engineer in the science of learning, I want to suggest a long-term compagation of the year in mathematics and physics, and a fine line of results. In a group or individual.
These courses focus on the courses and the activities that allow you to apply the connaissances that are attached to the original courses.

Lees meer

3D Design and drawings (CAD, CATIA, SOLIDWORKS, ...)

35.76 $ /h

Learn to draw CAD or become a pro in Solidworks and Catia. It has many advantages for beginners and for (semi) professionals who have already started a business. Looking for a designer job. Most large industrial companies work with Solidworks and Catia. Now you too!

First, you will learn the basics of this program in an effective and fun way. You'll learn all the tools you need and get hands-on expert advice during the course! So after this course, you will have the skills and confidence to start working your dream job!

No experience required, we're starting from scratch - step by step, I'll walk you through this amazing program!

I am a mechanical engineer working with several people in the industry. As a teacher, I worked with many people, where I taught Solidworks and Catia, as well as private lessons to (young) professionals and students in Europe / China.

For information, or if you have any questions, do not hesitate to contact me! Classes are in English or French.

Lees meer

Toon meer

Yoeri

5.0

(6)

I teach classes in statistics, quantitative methods, and data-analysis in English, Dutch, and French. I have many years of experience as a tutor and work in the data world professionally. I have experience using Python, Rstudio, SPSS, PSPP, and Jamovi. Also available for help with your thesis (note: I won't write your thesis for you). Ideally I have the course materials available for my preparations.

Louis

5.0

(6)

As a young graduate from Aerospace Engineering at Delft University of Technology I am affiliate with all engineering sciences and mathematics. At this university, I have been a mentor and tutor for all freshmen in their first year, assisting with all the necessary basics for a promising academic career. As such, I would like to offer my extensive experience in both the study and as a mentor for anyone from elementary school to higher-levels of education in terms of the class material, study guidance and proofreading of scientific reports. We will work together to find a method that suits you.

David

5.0

(6)

* Engineers:
Industrial Design, Knowledge of Materials, Resistance of Materials, Solid Mechanics, Statics & Dynamics, Fluid Mechanics, Thermics, Thermodynamics, Numerical Analysis, Discretization Methods (FEM, BEM, ...), Machine elements, Electromechanics

Yas

5.0

(6)

As an engineer, I would like to help other students navigate the sometimes complex world of mathematics and physics. During my studies, I tutored for 6 years in secondary schools in the region of The Hague, Delft, Rotterdam and Antwerp. I try to go through the course material interactively with the student and link theoretical concepts as much as possible to examples from our daily lives in order to prepare and motivate the student.

So if you would like tutoring on one or more subjects in mathematics or physics, you can contact me.

Elise

5.0

(6)

Bonjour,

Je suis une jeune ingénieure en électronique et je donne des cours d'électronique à tout niveaux. Que ce soit électronique analogique, digitale, réalisation de circuit imprimé, je suis disponible pour vous expliquer et vous guider à travers cette matière qui peut parfois générer des difficultés.

Dans un premier temps, envoyez moi vos supports de cours afin que je me prépare au cours. Le cours peut se faire en ligne, chez vous ou chez moi, en fonction de vos préférences.

Tenez compte du fait que je donne des cours en dehors des heures de bureau car je travaille en temps plein à cote.
Les cours durent minimum 1h30.

Basem

5.0

(6)

I start with the theory of the topic and then extend my work to handle the specific subject. I have good and long experience teaching and following students' progress from different countries and cultures. I can deal with students who have limited and normal engineering knowledge.

Roland

5.0

(6)

The TU Delft Aerospace Engineering Bachelor is one of the most prestigious bachelor programmes the Netherlands has to offer. With it being highly sought-after by students all around the globe, there is a highly competitive selection procedure which needs to be completed to get admitted to this popular degree. A massive part of this admission procedure is the selection exam, consisting of three different tests: Mathematics, Physics and First-Year Material.

As a cum laude graduated Aerospace Engineer at TU Delft, who has also been tutoring since 2017, I have a lot of valuable experience and knowledge of the program to help you out with the right preparation to get in. Moreover, after successfully helping more than 10 students secure a spot over the last three years, I have decided to prepare an additional custom lesson plan for each student, based on the admission syllabus, to ensure an even higher chance of admission.

With my calm and stepwise explanation, weaker topics will be addressed, and your solution procedures will be polished. Each lesson will either be theory, exercise-based or an opportunity to talk about the admission, student life, Delft, what to expect from the study and whether it is the right fit for you.

Milan

5.0

(6)

I offer Microsoft Excel tutoring for anyone looking to improve their skills, from high school students to aspiring professionals. Whether you’re just starting out and want to learn the basics like formulas, graphs, and pivot tables, or you’re more advanced and want to set up automated models, I’m here to help.

You determine the curriculum: we can work on specific tasks, such as school projects or work-related analyses, but I can also put together a structured curriculum to build your skills step by step.

For advanced users, I offer guidance in developing smart templates and models, so that you can perform analyses faster and more efficiently in the future. With my lessons, you will not only learn to understand Excel, but also to apply it practically to save time and make an impression. Suitable for anyone who wants to distinguish themselves with strong Excel skills!

Besides MS Excel, we can also delve deeper into the other Office applications and how to create attractive presentations in Powerpoint or Word.

Christian

5.0

(6)

⚙️ Private Tutoring – Engineering Sciences (Secondary & University)

👋 I am Christian, a civil engineer and PhD student in mechanical engineering, with over 15 years of experience in teaching and private tutoring in engineering sciences.

I offer personalized courses in the following areas:

🔧 General Mechanics

📐 Strength of materials (SOM)

🔥 Thermodynamics

⚡ Electricity

🌊 Fluid Mechanics

🏗️ Mechanical construction and machine components

✏️ Industrial drawing and mechanical design

💻 CAD / CFAO (CAD/CAM): SolidWorks | Inventor | Creo | CATIA V5 | AutoCAD 2D/3D | Fusion 360

📄 Support for final year projects (TFE/PFE): assistance with design, modeling, calculations, technical reports and presentations

🎓 For whom?

Students in general and technical secondary education

University students (Bachelor's & Master's)

Engineering students preparing for exams, projects, final year projects or final year projects

Professionals wishing to improve their skills or learn CAD software

🧠 Methodology

📊 Initial assessment to identify level and difficulties

🛠️ Clear explanations illustrated with concrete engineering examples

📈 Progressive method for succeeding in exams, projects, final year projects and final year projects

🤝 Practical support for practical work, homework, technical projects and final year projects

🏭 Alongside teaching, I have worked for more than 15 years as a civil engineer, which allows me to link theory to industrial applications and good professional practices.

📩 Need help mastering engineering concepts, passing your exams or progressing with your final year project?
Contact me for an initial discussion and a personalized learning plan.