Circuit Theory Analysis, Basic and Advanced topics in Electronic

Àpd 7.04 $ /h

I have 4 years of experience teaching
you will learn the basics of circuit theory analysis.
operation of semiconductors and their related devices such as Diode, MOSFET, and BJT, and their related applications.
verify your study with CAD tools such as Multisim, Altium, Proteus, ORCAD, and LT Spice.
teaching advanced Courses in Mixed Analog and Digital IC design using Cadence Virtuoso tools and teaching Layout with DRC, LVS, and PEX.
previous experience in Cadence are Design high-Speed Current steering DAC, Flash ADC, and low noise Biopotential Amplifier Using the chopper technique.

Lieu

En ligne depuis Égypte

Présentation

I have good experience of three years of teaching Circuit Theory and Basic electronic Devices such as Diode, MOSFET, BJT, Op-Amp, Differential pair, Current Mirror, and Oscillator topics such as Harmonic oscillator and multivibrator. Also related topics such that Feedback, frequency response, and noise analysis.

I have good experience in CAD tools such that Altium, protus, Multisim, OR CAD, and LT spice.
I graduated from the Department of communication and Electronics and Mastered analog and Digital (Mixed) IC circuits and Master Cadence Virtuoso software and VLSI Layout.

Education

graduated from telecomunication and electronics department.
Master degree in Mixed analog and Digital IC Design (Design High speed Current Steering DAC)
GPA: 3.2

Expérience / Qualifications

Experience of 3 years in online teaching of the following courses:
Circuit Theory.
Electronics I,II.
Logic Gates.
Analog IC.
DSP.
Analog Communication.

Age

Adolescents (13-17 ans)

Adultes (18-64 ans)

Seniors (65+ ans)

Niveau du Cours

Débutant

Intermédiaire

Avancé

Durée

60 minutes

90 minutes

120 minutes

Enseigné en

anglais

arabe

Compétences

Circuits electroniques

Télécommunications

Disponibilité semaine type

(GMT -04:00)

New York

Cours par webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Rym

5.0

(2)

Are you preparing for MPSI, PCSI, MP, PSI, PTSI or TSI and you feel that physics is slipping away from you — the formulas are piling up but the reasoning isn't following? That's exactly where I come in.

With a PhD in Physics and experience as a teacher in preparatory classes and at university, I help students build a real understanding of physics, not just apply formulas.

What you gain by working with me:
— A sound reasoning method, transferable to all exercises
— Targeted preparation for the written and oral parts of the competitive exams
— Structured sessions, adapted to your level and your weaknesses

The courses are 100% online (Zoom or Google Meet), which allows me to support students in France, Belgium, Switzerland and Tunisia.

First assessment session offered so that we can identify your weaknesses together.

Matías

5.0

(2)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Abdellah

5.0

(2)

je propose des cours de sciences de l’ingénieur pour STE et CPGE option TSI ;PTSI ...ces cours peuvent être dispensés à domicile ou à distance ,je donne également des cours de l'électronique analogique et numérique pour tout les niveaux avec des sujets examens et des TD types.

Ahmed

5.0

(2)

Professeur agrégé en Sciences Industrielles de l’Ingénieur et Ingénierie Electrique, et Ingénieur d'état en génie électrique. Disponible pour des cours de soutiens, préparation aux concours et aux examens : IUT, BTS, EST, CPGE, UNIVERSITE, CYCLE D'INGENIEUR.

Je propose des cours en électronique, électrotechnique, automatique et électricité pour CPGE TSI, EST et BTS et des Ecoles d'ingénieurs.

Je dispose de tout les outils technologiques nécessaires pour donner des cours à distance et donc dispenser le cours dans d'excellentes conditions.

Méthode de travail :

Je fonctionne selon vos attentes puis je vous proposerez des cours plus ciblées pour combler vos lacunes.

1- Nous commençons par un rappel de cours en mettant l'accent sur les points clés.
2- Nous travaillons ensemble des exercices en lien direct avec le cours de la classe.
3- Nous abordons des exercices plus approfondis pour traiter les différents cas.

+ Electronique de puissance :
- Convertisseur statique DC/AC : Onduleur
- Convertisseur statique AC/DC : Redresseur
- Convertisseur statique DC/DC : Hacheur
- Convertisseur statique AC/AC : Gradateur

+ Electrotechnique:
- Machine à courant continu
- Variation de vitesse de la machine à courant continu
- Machine asynchrone.
- Variation de vitesse de la machine asynchrone
- Machine synchrone - Alternateur
- Transformateurs
- Régime monophasé et régime triphasé
- Energies renouvelables (solaire & éolienne)

+ Automatique :
- Automate programmable (Schneider et Siemens)
- Régulation industrielle
- Asservissement
- Microcontrôleurs

+ Electronique :
- Capteurs et détecteurs
- Amplificateurs opérationnels ALI
- Filtres analogiques : Filtrage
- Convertisseurs Analogique/Numérique CAN et CNA
- Systèmes logique combinatoires et séquentielles
- Modulation analogique (AM, FM, PM) et Modulation numérique (ASK, FSK, PSK, QAM)

+ Projets :
- Réalisation des projets à base d'arduino
- Simulations sur Proteus ISIS
- Réalisation des projets à base ESP8266 nodmcu ESP32

5.0

(2)

Engineer in engineering sciences option electrical engineering
Senior professor of engineering sciences

SKILLS
IS engineering sciences
Embedded system (microcontrollers, z80 microprocessors, Motorola, ARM), Real-time system, network concept (OSI, TCP/IP), design of systems and electronic cards (analog, digital, power supply), signal processing, communication protocols ( SPI, I2C, CAN BUS, UART...), telecommunications.

Technical skills :
Languages: C / C ++, JAVA, VHDL / VERILOG, Python, Assembler.
Professional software:
MATLAB, SIS + PSIM + PSpice, QUARTUS, IDE68, Mikro C, Xilinix ISE, Labview, CoIDE.
Technologies:
Siemens PLC, Allen bradeley, STM32, FPGA, TIA Portal, STEP7, RSLogix

 Electrical engineering: Electric motors, Transformers
 Renewable energies: study of the solar pumping installation and the wind turbine installation.
 Electronics: analog, digital, power electronics, system electronics and instrumentation
biomedical.
 Networks and telecommunications.
 Industrial IT and programmable logic controllers.
 Automatic: modeling, identification and control of systems.
 Mechatronics.
 MATLAB
• Noise and vibration of asynchronous motors
• Speed variator
• Study and implementation of LV / MV standards
• Electrical accreditation: NF C18-510 standard
• NF C 15-100 electrical installations
• Management of electrical energy in networks (Continuous Power Flow)

Marko

5.0

(2)

✅ Experienced teacher offering private online physics lessons for all levels.
✅ Fully dedicated and focused on student progress.
✅ Very patient, systematic, and organized.

I teach a wide range of topics in physics, including but not limited to:

5- Physical quantities and units
- Kinematics (types of motion, kinematics of point particles and rigid bodies)
- Dynamics (frictional and inertial forces, Newton's laws)
- Laws of conservation (energy, momentum)
- Theory of collision processes
- Inertial and non-inertial reference frames
- Potential and kinetic energy
- Gravitation and gravity fields
- Oscillatory and wave motions
- Harmonic oscillator
- Doppler effect
- Standing waves
- Sound waves and physical characteristics of sound
- Surface tension and capillary phenomena
- Fluid mechanics
- Temperature and heat
- Calorimetry
- Phase transitions
- Principles of thermodynamics
- Electrostatics
- Electromagnetism
- Kirchhoff's laws
- Electronic circuits
- Dielectrics
- Optics
... and much more.

If there are specific topics you would like to focus on or if you have any questions, feel free to let me know. I am here to help you deepen your understanding of physics.

Youssef

5.0

(2)

Associate professor in engineering sciences, 5 years of professional experience at all levels, college, high school, university, preparatory classes, engineering schools. Gives courses from college to university, preparation for exams, revisions, oral preparation, development of study methodologies.

Webcam lessons

Abdelali

5.0

(2)

Hello, I am an electrical and electronic engineer with extensive experience as a professor in higher education in engineering sciences and electrical engineering, as well as a rich experience as an embedded systems engineer, in EE architecture, ADAS, Testing and validation in the automotive sector.

I propose for the students of the higher cycle a supervision and an accompaniment until the realization of their projects or mini projects in electronics, signal processing, regulation and enslavement... using languages and software such as: Matlab / Simulink, Python, LabVIEW, ISIS Proteus, Arduino...

I also give courses and training in:

Embedded systems, ADAS systems and automotive engineering
Electrical and electronic circuits
Automatic
Industrial regulation
Signal processing
C Programming, Assembler, PIC, Arduino
PIC microcontroller
Microprocessor

Yassine

5.0

(2)

Discover the world of robotics, electronics, and programming with a course designed for technology and innovation enthusiasts. Whether you are a beginner or already have some basics, this course will guide you through the fundamentals, with a hands-on approach to designing your own projects. You will learn how to use electronic components, program microcontrollers, and assemble robots to perform autonomous tasks.

Ossama

5.0

(2)

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School. I master the teaching of analog and digital electronics, covering components, integrated circuits and embedded systems.
- Fundamentals of electronics: Definitions, basic concepts, Kirchhoff's laws.
- Electronic components: Resistors, capacitors, inductors, diodes.
- Operational amplifiers: Operation, characteristics, applications.
- Basic analog circuits: Amplifiers, filters, oscillators.
- Introduction to digital electronics: Binary logic, logic gates, combinational circuits.
- Numbering systems: Conversion between bases, adders, subtractors.
- Transistors: Bipolar transistors, field effect transistors, characteristics, applications.
- Transistor amplifiers: Configuration, gain calculations, stability.
- Analog integrated circuits: Voltage regulators, A/D and D/A converters.
- Sequential digital systems: Flip-flops, registers, counters.
- Microcontrollers and microprocessors: Architecture, basic programming, interfaces.
- Analysis of electronic circuits: Frequency and time analysis methods.
- Advanced analog circuits: Differential amplifiers, power amplifiers, active filters.
- Modulation and demodulation techniques: AM, FM, PM.
- Embedded systems: Design of real-time systems, communication between peripherals.
- Test and measurement techniques: Oscilloscope, spectrum analyzer, signal generators.
-

Rachid

5.0

(2)

En tant que professeur et ingénieur spécialisé en génie électrique, j'adopte une approche personnalisée et interactive de l'enseignement. Mon approche se caractérise par les éléments suivants :
🟦 Création d'un environnement d'apprentissage favorable, où vous vous sentez à l'aise pour poser des questions et explorer en profondeur les concepts électriques.
🟦 Partage de savoir au moyen d'exemples concrets et de démonstrations pratiques.
🟦 Objectif visant à favoriser une compréhension approfondie chez vous, tout en vous préparant efficacement aux examens et vous aidant à faire vos devoirs et vos projets.

Domaines de Compétences & Matières Enseignées

Je propose des cours approfondis couvrant les principaux piliers du génie électrique :

🟠 Électrotechnique : Machines électriques, transformateurs (monophasés et triphasés), énergies renouvelables (solaire et éolien).

🟠Électronique de Puissance : Convertisseurs statiques (Redresseurs, Hacheurs, Onduleurs, Gradateurs).

🟠Automatique et Asservissement.

🟠Automatisme et systèmes embarqués.

🟠Électronique Analogique & Numérique : Logique, filtres, amplificateurs, etc.

🟠Capteurs et Détecteurs.

🟠Télécommunications : Modulation analogique (AM, FM) et numérique (ASK, FSK, PSK).

🟠Traitement du signal

🟠Aide aux Projets & Maîtrise Logicielle:
Je vous accompagne activement dans la réalisation de vos projets, notamment : conception et programmation sur microcontrôleurs (Arduino, ESP32, etc.).
Simulation et modélisation sous Proteus ISIS et MATLAB/SIMULINK.

Abdallah

5.0

(2)

I offer online tutoring in High School Mathematics & Physics, University Electronics/Electronic Circuits, and Turkish language.
Lessons are structured, clear, and focused on understanding + practice, with personalized plans, step-by-step solutions, and regular feedback.

Fayza

5.0

(2)

This class is designed for beginners who want to start learning robotics in a simple and practical way.

Students will learn the basics of electronics, Arduino programming, sensors, motors, and how to build small real-world projects step by step. No advanced background is required.

The course focuses on hands-on learning: connecting components, writing Arduino code, understanding how robots work, and creating mini projects such as smart fans, automatic lights, and simple robots.

By the end of the class, students will understand how hardware and software work together and will be able to build their own basic robotic systems.

This class is suitable for students, hobbyists, and anyone interested in robotics and technology.

Elayachi

5.0

(2)

I offer mathematics, electronics and electrotechnical courses adapted to all levels: middle school, high school, preparatory classes, university, as well as for students in engineering schools or technical training.

With a solid background in teaching and a clear pedagogical approach, I help you understand fundamental concepts, progress quickly, and gain confidence.
Each session is structured, interactive and practice-oriented.
What I teach:

Mathematics: algebra, analysis, functions, differential equations, probability

Electronics: analog and digital circuits, components, fundamental laws

Electrical engineering: electrical machines, three-phase systems, transformers, power

Homework help, exam preparation, ongoing support

Detailed explanations, solved exercises, effective methods

Method of working :

Simple and progressive explanations

Practical exercises to reinforce understanding

Solving real-world problems

Clear visual aids and diagrams

Complete adaptation to the student's level and objectives

For who ?

Middle and high school students

Students in BTS, DUT, Bachelor's, Master's programs

Apprentice technicians or engineers

Anyone wishing to enhance their technical skills

Objective :
Helping you master essential concepts, improve your results and develop a solid and lasting understanding of scientific subjects.

Jean-François

5.0

(2)

A course for creators, artists, designers, and... anyone curious! Learn to manipulate and program Arduinos and other control boards, discover the sensor ecosystem, and implement motors, actuators, and lights. Start designing your own interactive systems!