SolidWorks Associate and Professional Certification (CSWA & CSWP) Prep Courses in English

Von 54.41 Fr /Std

Computer-Aided Design (CAD) software is used in nearly all branches of Design Engineering, it represents a powerful tool to create, and represent 2D and 3D models in a user-friendly interface. SolidWorks is currently used by over 165,000 engineering companies worldwide (as of 2013). With the rise of Youtube, learning to use these packages is easier than ever, however, certifications are what make a company believe that you really know what you are doing. During my bachelors I took a class specifically dedicated to training for the CSWA and CSWP. At the end I got perfect scores in both. My goal is to pass on the strategies and tricks I was taught to ensure that once you make the economic investment to take this exam, you will pass with flying colors.

Zusätzliche Informationen

Must have SW installed in his computer.

Ort

Online aus Vereinigte Staaten

Über mich

I have always been fascinated by the idea of sharing the knowledge that I have worked so hard to amass. I always try to teach my students that in both languages and mathematics, the only key is practice, practice, practice. I was born and raised in Venezuela. Four years ago I moved to the US to pursue higher education. During these years I worked as a Teaching Assistant for classes such as Calculus, Linear Algebra, Physics I and II. Additionally, I worked as a private tutor for SAT and GRE prep courses for a year and a half and a year, respectively. Depending on your level of knowledge and expected goal, my focus will shift from elucidating concepts to allow you to see what is happening, to lots of problems to get familiar with the material. Over the years I have come up with strategies and techniques to efficiently tackle these science classes, and I am looking forward to sharing them with you.
To give you an idea of my mastery of this content, I got a perfect score in the Quantitative Reasoning section of the GRE six months ago.

Bildung

MSc in Biomedical Engineering, Biomechanics and Biomaterials track at Politecnico di Milano.
Mechanical Engineering Major from the University of Central Florida. Earned Summa Cum Laude honors with highest GPA of the college (3.97/4.00).
Certified as auxiliary lecturer of the Department of Mathematics of the University of Central Florida.

Erfahrung / Qualifikationen

1) Worked as an Undergraduate Teaching Assistant for Calculus I, II, III, Linear Algebra, Physics I, and Physics II. (2 years)
3) Private tutor for SAT and GRE prep courses (1 and a half years)

Alter

Kinder (7-12 Jahre alt)

Jugendliche (13-17 Jahre alt)

Erwachsene (18-64 Jahre alt)

Seniorinnen und Senioren (65+ Jahre alt)

Unterrichtsniveau

Anfänger

Mittel

Fortgeschritten

Dauer

60 Minuten

90 Minuten

120 Minuten

Unterrichtet in

Italienisch

Portugiesisch

Englisch

Spanisch

Französisch

Fachkenntnisse

Cad software

Maschinenbau

Biomedical engineering

Bewertungen

Verfügbarkeit einer typischen Woche

(GMT -04:00)

New York

Online via Webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

All-level Conversational Spanish with Latin American Tutor

28.14 Fr /Std

Did you know that there are 20 Hispanic-speaking countries in the world? There is way more to this beautiful language than what is spoken in Spain. Son Venezuelan parents, I want to give you the chance to experience this language with different eyes, to hear different accents (you get to choose between Venezuelan, Colombian, and Argentinian), and learn a bit from different cultures, thus helping to broaden your horizons. I am an ELE certified Spanish teacher and regardless of the accents, we are here to improve your Spanish.

This class is aimed at anyone looking to increase their Spanish-speaking and listening skills. Depending on the student's interests, the focus will shift from vocabulary expansion and sentence structuring to "accent" reduction. My goal is to be a talking partner with whom you can engage in significant conversations about any topic you are interested in. Whether you are getting ready for a trip or a presentation or if you just want to make sure you do not forget what you already know, practice makes perfect and I want to try to help you achieve your goals.

I will pay attention whenever you are speaking and point out the mistakes (or "funny-sounding" phrases) in a polite manner after you finish speaking. That way I will not cut you off or discourage you from not being afraid of making mistakes (which we all make).

All-level Conversational English with American Tutor

28.14 Fr /Std

This class is aimed at anyone looking to increase their English-speaking and listening skills. Depending on the student's interests, the focus will shift from vocabulary expansion and sentence structuring to "accent" reduction. My goal is to be a talking partner with whom you can engage in significant conversations about any topic you are interested in. Whether you are getting ready for a trip or a presentation or if you just want to make sure you do not forget what you already know, practice makes perfect and I want to try to help you achieve your goals.

I will pay attention whenever you are speaking and point out the mistakes (or "funny-sounding" phrases) in a polite manner after you finish speaking. That way I will not cut you off or discourage you from not being afraid of making mistakes (which we all make).

Haider

5.0

(6)

Welcome!

I have already completed my master’s degree in mechanical engineering and am currently doing my doctorate.

Tutoring / support is offered in

✔ Bachelor's thesis
✔ Master's thesis
✔ Thesis
✔ Project work
✔ Housework
✔ Dissertation
✔ Construction project
✔Control engineering
✔Electrical engineering

+ other subjects on request

When contacting please
Study education
notify!

Maarouf

5.0

(6)

Gibt es Probleme im Fach Mathematik ? Brüche ? Formeln ? Gleichungen ? etc.
Alles kein Problem mit der richtigen Herangehensweise und einiger Erfahrung in der Lehre.

Statistik ist nicht ganz mein Fachgebiet. Dafür alles anderen Themen in Mathe verständlich und leicht erklärt.

Adrian

5.0

(6)

I'll help you prepare for your statics exam, work through tasks with you step by step that you don't know what to do, or answer your questions about statics. Through my work as a tutor for statics at the university, I have a large collection of tasks and can support you with exercises for your own study.

Süleyman

5.0

(6)

I am doing a PhD. I can explain everything in the mechanical engineering curriculum, such as thermodynamics, work transition, fluid mechanics, mechanics, Autocad, NX, Solidworks, Matlab, Ansys. Also math, linear algebra, differential equations. I have been working as a research assistant for five years.

Mustafa

5.0

(6)

All the classes of mine include flexible hours depending on requests from tuition-takers. Every session takes one hour with interactive learning techniques. The primary aim of them is to ensure the tuition takers satisfy with the outcomes in the end.

Prof-I

5.0

(6)

Fundamentals of Mechanical Engineering Design
-Review of Load and Stress Concept
-Torsion and Bending
-Compound Stresses
-Mohr's Circle
-2D and 3D Stresses
-Shaft Design
-Bearing Selection
-Belt Selection
-Gear Design (Spur, Helical, Bevel)
-Fatigue Design including Stress Concentration

Marty

5.0

(6)

I have tutored many students in Mathematics, Physics, Differential Equations, Solid Mechanics, Fluid Mechanics, and Nuclear Engineering, and my ratings indicate that students are happy with the results. When you are my student, I am committed to meeting your needs, and my methods are both economical and effective. Whether you need some help in understanding a subject, or have a project that you need help on, you can count on me to provide the support you need!

Gokhan

5.0

(6)

I specialize in teaching Mechanics (statics, mechanics of materials and dynamics) for engineering students both in English and German language. Also in Turkisch.

I have 20 years of experience in teaching using both classical and innovative methods.

Both single and group lessons can be arranged

David

5.0

(6)

Courses in math, physics, mechanics, electricity, thermal, thermodynamics, engineering sciences.
Universities & High Schools Professor gives support courses to all categories of students.
Possibility of face-to-face lessons and/or supervision (Teams)
Numerous references in Belgium and internationally (France, Italy, England, UK, Ireland, Maghreb, USA, Israel)
Adaptation according to the information and needs of the student.
Flexibility of the organization according to mutual needs & possibilities.

Nguemkam

5.0

(6)

Discover the theoretical foundations of mechanical and electrical engineering in this online course. Explore the principles of solid and fluid mechanics, electricity, and electronics, and learn how to design and analyze complex systems. This course is ideal for students and professionals looking to expand their knowledge of mechanical and electrical engineering. Courses will be delivered online, with course materials and interactive exercises to help you better understand the concepts.

أحمد

5.0

(6)

Hello everyone and have a nice day,

As a teacher, teacher, student, teacher, professional teacher, and professional student/coaching/unterstützung in MATLAB/Simulink/embedded programme/automatic code generation...etc., you can also contact him.

Use this device for your Master Elektrotechnik-Ingenieur with a new academic design and installation tool in the basic model and use the Matlab/Simulink-Model for embedded System and Regelung on the E-Motoren with a fan and pass it. and Anforderungen.

For more information, please contact us. Unterstützung professionelle in Matlab, Simulink, C, Microcontroller and embedded Programmierung an.

There is a lot of expertise in this article, too:
- Matlab, Simulink,
- S-Functions, Simulink Modelle, Model Basierte Programmierung and Code Generation,
- Electrical drives and E-Motoren,
- STM32 Microcontroller,
- Rapid Prototyping mittels dSPACE HiL-Systeme and Echtzeit-Systeme,
- Power electronics / Leistungselektronik,
- Betreuung and Unterstützung während verschiedenenenenenen der projecterbeiten,
- ...

There is a lot of contact with you.

Very nice greetings

Mohamed

5.0

(6)

CAD-Unterricht (Autodesk Inventor, SolidWorks, Fusion 360)
Du möchtest professionelle CAD-Kenntnisse erwerben oder vertiefen?
Ich biete individuell abgestimmten Online-Unterricht für technische Zeichnung, 3D-Konstruktion und Produktdesign mit folgenden Programmen:

🔹 Autodesk Inventor
🔹 SolidWorks
🔹 (Weitere CAD-Programme auf Anfrage)

Was dich im Unterricht erwartet:
Grundlagen der 2D- und 3D-Konstruktion

Parametrische Modellierung & Skizzentechnik

Baugruppen (Assemblies) erstellen und verwalten

Zeichnungsableitung nach technischen Normen (z. B. ISO, DIN)

Explosionsdarstellungen & Animationen

Tipps für die berufliche Praxis (Maschinenbau, Produktentwicklung, Mechatronik, Ausbildung)

Julian

5.0

(6)

Tutoring in Thermodynamics 1 and 2 – from former student assistants of the LTT (RWTH Aachen)

Are you looking for understandable and practical support in Thermodynamics I & II?
I offer individual tutoring for students (especially mechanical engineering, process engineering, energy engineering, and physics) – from basics to exam preparation.

About me:

- Several semesters of experience as a tutor for Thermodynamics I & II

- Former teaching assistant at the LTT (Chair of Technical Thermodynamics) at RWTH Aachen

- Focus on understanding rather than memorization – including arithmetic exercises and concept linking

- Be patient, structured, and committed to getting through the exam as quickly and painlessly as possible!

In Aachen and the surrounding area (also remote/online possible)

Jammal

5.0

(6)

Hi, my name is Jammal and I give math and physics lessons for all school levels.
I'm an aerospace engineer and I'm training to be an airline pilot :)

Lorin

5.0

(6)

Dieser Kurs vermittelt die grundlegenden Fähigkeiten zur Arbeit mit Vectorworks. Die Teilnehmenden lernen den Aufbau der Benutzeroberfläche kennen, erstellen einfache 2D‐Zeichnungen, arbeiten mit Ebenen und Klassen und nutzen grundlegende Werkzeuge zur Konstruktion und Bemaßung. Zudem werden erste 3D‐Grundformen, Ansichtssteuerung sowie der Export von Plänen behandelt. Nach dem Kurs können die Teilnehmenden einfache technische Zeichnungen selbstständig in Vectorworks erstellen und organisieren.