Circuit Theory Analysis, Basic and Advanced topics in Electronic

Àpd 6.29 € /h

I have 4 years of experience teaching
you will learn the basics of circuit theory analysis.
operation of semiconductors and their related devices such as Diode, MOSFET, and BJT, and their related applications.
verify your study with CAD tools such as Multisim, Altium, Proteus, ORCAD, and LT Spice.
teaching advanced Courses in Mixed Analog and Digital IC design using Cadence Virtuoso tools and teaching Layout with DRC, LVS, and PEX.
previous experience in Cadence are Design high-Speed Current steering DAC, Flash ADC, and low noise Biopotential Amplifier Using the chopper technique.

Lieu

En ligne depuis Égypte

Présentation

I have good experience of three years of teaching Circuit Theory and Basic electronic Devices such as Diode, MOSFET, BJT, Op-Amp, Differential pair, Current Mirror, and Oscillator topics such as Harmonic oscillator and multivibrator. Also related topics such that Feedback, frequency response, and noise analysis.

I have good experience in CAD tools such that Altium, protus, Multisim, OR CAD, and LT spice.
I graduated from the Department of communication and Electronics and Mastered analog and Digital (Mixed) IC circuits and Master Cadence Virtuoso software and VLSI Layout.

Education

graduated from telecomunication and electronics department.
Master degree in Mixed analog and Digital IC Design (Design High speed Current Steering DAC)
GPA: 3.2

Expérience / Qualifications

Experience of 3 years in online teaching of the following courses:
Circuit Theory.
Electronics I,II.
Logic Gates.
Analog IC.
DSP.
Analog Communication.

Age

Adolescents (13-17 ans)

Adultes (18-64 ans)

Seniors (65+ ans)

Niveau du Cours

Débutant

Intermédiaire

Avancé

Durée

60 minutes

90 minutes

120 minutes

Enseigné en

anglais

arabe

Compétences

Circuits electroniques

Télécommunications

Disponibilité semaine type

(GMT -04:00)

New York

Cours par webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

François

4.38

(8)

Civil engineer, with extensive experience in individual training, gives:

>Maths, physics, chemistry, statistics, algebra, geometry, analysis
>Electricity, automatic, electronic

For secondary level up to master.
I illustrate the theory on the basis of concrete examples thanks to my experience in the business environment.

Rym

4.38

(8)

Doctor of Physics, teacher for more than 18 years, I support students in scientific preparatory classes (MPSI, PCSI, PTSI, MP, PSI, TSI, Medical Prep, etc.) to master physics in depth and to succeed in their competitive exams.

My approach is based on a rigorous methodology, a detailed analysis of blockages and a tailor-made progression adapted to each student, whether it is to consolidate the basics or achieve excellence.

🎯 What I offer

-Methodical work on understanding fundamental concepts
-Intensive training in solving exercises and competition-type subjects
-Detailed analysis and correction of copies
-Scientific and mental coaching for stress and time management
-Personalized support according to the program (French or Tunisian)

👩‍🏫 Course

-Doctor of Plasma Physics
-DEA and Masters in Fundamental Physics
-Former teacher in preparatory classes and at the Faculty of Medicine of Sfax
-Experience at Paris 11 University
-More than 15 years in higher education and 5 years in French high schools

💻 Terms and Conditions

-Online courses (Zoom, Google Meet, graphics tablet)
- Face-to-face courses by appointment in Tunis
- Personalized support, standard corrections, weekly monitoring

🚀 Objective

Enable each student to understand, reason and perform with confidence.
Rigor, method and requirement... without ever losing the pleasure of science.

Matías

4.38

(8)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Abdellah

4.38

(8)

je propose des cours de sciences de l’ingénieur pour STE et CPGE option TSI ;PTSI ...ces cours peuvent être dispensés à domicile ou à distance ,je donne également des cours de l'électronique analogique et numérique pour tout les niveaux avec des sujets examens et des TD types.

Ahmed

4.38

(8)

Professeur agrégé en Sciences Industrielles de l’Ingénieur et Ingénierie Electrique, et Ingénieur d'état en génie électrique. Disponible pour des cours de soutiens, préparation aux examens d'électronique.... : IUT, BTS, EST, CPGE, UNIVERSITE, CYCLE D'INGENIEUR.

Je propose des cours en électronique, électrotechnique, automatique et électricité pour CPGE TSI, EST et BTS et des Ecoles d'ingénieurs.

Je dispose de tout les outils technologiques nécessaires pour donner des cours à distance et donc dispenser le cours dans d'excellentes conditions.

Méthode de travail :

Je fonctionne selon vos attentes puis je vous proposerez des cours plus ciblées pour combler vos lacunes.

1- Nous commençons par un rappel de cours en mettant l'accent sur les points clés.
2- Nous travaillons ensemble des exercices en lien direct avec le cours de la classe.
3- Nous abordons des exercices plus approfondis pour traiter les différents cas.

+ Electronique de puissance :
- Convertisseur statique DC/AC : Onduleur
- Convertisseur statique AC/DC : Redresseur
- Convertisseur statique DC/DC : Hacheur
- Convertisseur statique AC/AC : Gradateur

+ Electrotechnique:
- Machine à courant continu
- Variation de vitesse de la machine à courant continu
- Machine asynchrone.
- Variation de vitesse de la machine asynchrone
- Machine synchrone - Alternateur
- Transformateurs
- Régime monophasé et régime triphasé
- Energies renouvelables (solaire & éolienne)

+ Automatique :
- Automate programmable (Schneider et Siemens)
- Régulation industrielle
- Asservissement
- Microcontrôleurs

+ Electronique :
- Capteurs et détecteurs
- Amplificateurs opérationnels ALI
- Filtres analogiques : Filtrage
- Convertisseurs Analogique/Numérique CAN et CNA
- Systèmes logique combinatoires et séquentielles
- Modulation analogique (AM, FM, PM) et Modulation numérique (ASK, FSK, PSK, QAM)

+ Projets :
- Réalisation des projets à base d'arduino
- Simulations sur Proteus ISIS
- Réalisation des projets à base ESP8266 nodmcu ESP32

Marko

4.38

(8)

✅ Experienced teacher offering private online physics lessons for all levels.
✅ Fully dedicated and focused on student progress.
✅ Very patient, systematic, and organized.

I teach a wide range of topics in physics, including but not limited to:

5- Physical quantities and units
- Kinematics (types of motion, kinematics of point particles and rigid bodies)
- Dynamics (frictional and inertial forces, Newton's laws)
- Laws of conservation (energy, momentum)
- Theory of collision processes
- Inertial and non-inertial reference frames
- Potential and kinetic energy
- Gravitation and gravity fields
- Oscillatory and wave motions
- Harmonic oscillator
- Doppler effect
- Standing waves
- Sound waves and physical characteristics of sound
- Surface tension and capillary phenomena
- Fluid mechanics
- Temperature and heat
- Calorimetry
- Phase transitions
- Principles of thermodynamics
- Electrostatics
- Electromagnetism
- Kirchhoff's laws
- Electronic circuits
- Dielectrics
- Optics
... and much more.

If there are specific topics you would like to focus on or if you have any questions, feel free to let me know. I am here to help you deepen your understanding of physics.

Abdelali

4.38

(8)

Hello, I am an electrical engineer having an extensive experience as a professor in higher education in engineering science and electrical engineering, as well as great experience as an embedded systems engineer, in EE architecture, ADAS, Testing and validations in the automotive sector.

I offer support courses and training in engineering science subjects, particularly in Automation and Industrial Control, to graduate students. My methodology is based on the acquisition of knowledge and course concepts in a very simple manner and also on practical experience using the most widely used software on the market.

Automation is the discipline that, generally speaking, deals with the control of systems. It is therefore very important in the industrial field, to which it provides solutions, study methods, and systematic analysis approaches. It is a scientific discipline that studies dynamic systems, signals, and information for the purposes of control or decision-making.

This course consists of six chapters, divided as follows:

Chapter 1: Introduction to Automation & Controlled Systems
Chapter 2: Mathematical Modeling of Controlled Systems
Chapter 3: Time & Frequency Analysis of Controlled Systems
Chapter 4: Controlling Systems & Block Diagram Algebra
Chapter 5: Stability & Performance of Controlled Systems
Chapter 6: Correction and Regulation of Controlled Systems

Abdallah

4.38

(8)

By being an engineer who has experienced all the possibilities of stress that a student can encounter when understanding it, a teacher who has encumbered an experience for years, I have developed teaching and efficient methods in order to better explain to my students.
For me, a student needs a logical explanation of things and a personalized follow-up in order to be able to better advance and develop their own skills.

Distance courses:
-----------------------------------
I can give distance lessons perfectly since I have a tablet on which I can work in the same way as if it were a notebook. The student can see everything I do live through screen sharing, and all they need is to use a computer. At the end of the course, I send him a copy of all the work done, which allows me to make sure that he has kept a clean record of the course spent together.

Domains :
-------------------------------------------------- ------------------

* Analog electronic:
-------------------------------------------
- Semiconductor and PNP Junction
- Diodes and transistors
- Bipolar transistors and JFET (Static and dynamic analysis)
- Operational amplifier in linear and non-linear mode
- Frequency analysis (Bode, Nichols, Nyquist diagram ...)
- Analog filtering
- Analog Oscillator
- Converters: CAN and CNA
- Modulation
- Differential amplifier
- ...

* Electrical engineering:
--------------------------------
- Single-phase network
- Three-phase network
- Coil and magnetic circuit
- Single-phase and three-phase transformers
- Direct current machine (MCC)
- Asynchronous Machine (MAS)
- Synchronous Machine (MS)
- Speed variators
-....

* Power electronics:
----------------------------------------------
- Choppers
- Rectifiers
- Inverters
- Dimmers
- Speed variator
-....

* Digital Electronics:
-------------------------------------------
- Boolean algebra
- Combinatorial systems
- Sequential systems
- Counters and decounters
- Registers and memories
- ....

* Industrial Automation:
----------------------------------------
- Grafcet and GEMMA
- State graph / state diagram
- Programmable controllers (Siemens, Schnieder ...)
- Programmable circuits (Microcontrollers, arduino ...)
-....

* Linear automatic - Servo-control and regulation:
-------------------------------------------------- -----------------------------------
- Laplace transformation
- Transfer function
- Functional diagrams
- Dynamic performance of linear systems: Speed, Precision and Stability
- The correctors: P, PI, PID, phase advance, phase delay, ...
- Regulation and servoing
- Digital servo
-....

-------------------------------------------------- ---------------
Additional Information
Zoom or Google meet
Whiteboard

Anyway, I'll be there to help you move forward and love this area more.
Are you ready to experience this learning adventure with me?

4.38

(8)

Hello, I am a doctor in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer support courses in the subjects of engineering sciences (electronics, automation, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism (propagation of high frequency waves)
Automatic (continuous, sampled)
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python,VHDL
PIC Microprocessor and Microcontroller
Signal processing and data acquisition
Engineering Sciences

These courses allow the student to get up to speed and regain confidence in all scientific subjects, just as they prepare him effectively for the Baccalaureate, the Preparatory Classes or various examinations of the engineering classes.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Youssef

4.38

(8)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Yassine

4.38

(8)

Discover the world of robotics, electronics, and programming with a course designed for technology and innovation enthusiasts. Whether you are a beginner or already have some basics, this course will guide you through the fundamentals, with a hands-on approach to designing your own projects. You will learn how to use electronic components, program microcontrollers, and assemble robots to perform autonomous tasks.

Ossama

4.38

(8)

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School. I master the teaching of analog and digital electronics, covering components, integrated circuits and embedded systems.
- Fundamentals of electronics: Definitions, basic concepts, Kirchhoff's laws.
- Electronic components: Resistors, capacitors, inductors, diodes.
- Operational amplifiers: Operation, characteristics, applications.
- Basic analog circuits: Amplifiers, filters, oscillators.
- Introduction to digital electronics: Binary logic, logic gates, combinational circuits.
- Numbering systems: Conversion between bases, adders, subtractors.
- Transistors: Bipolar transistors, field effect transistors, characteristics, applications.
- Transistor amplifiers: Configuration, gain calculations, stability.
- Analog integrated circuits: Voltage regulators, A/D and D/A converters.
- Sequential digital systems: Flip-flops, registers, counters.
- Microcontrollers and microprocessors: Architecture, basic programming, interfaces.
- Analysis of electronic circuits: Frequency and time analysis methods.
- Advanced analog circuits: Differential amplifiers, power amplifiers, active filters.
- Modulation and demodulation techniques: AM, FM, PM.
- Embedded systems: Design of real-time systems, communication between peripherals.
- Test and measurement techniques: Oscilloscope, spectrum analyzer, signal generators.
-

Rachid

4.38

(8)

En tant que professeur et ingénieur spécialisé en génie électrique, j'adopte une approche personnalisée et interactive de l'enseignement. Mon approche se caractérise par les éléments suivants :
🟦 Création d'un environnement d'apprentissage favorable, où vous vous sentez à l'aise pour poser des questions et explorer en profondeur les concepts électriques.
🟦 Partage de savoir au moyen d'exemples concrets et de démonstrations pratiques.
🟦 Objectif visant à favoriser une compréhension approfondie chez vous, tout en vous préparant efficacement aux examens et vous aidant à faire vos devoirs et vos projets.

Domaines de Compétences & Matières Enseignées

Je propose des cours approfondis couvrant les principaux piliers du génie électrique :

🟠 Électrotechnique : Machines électriques, transformateurs (monophasés et triphasés), énergies renouvelables (solaire et éolien).

🟠Électronique de Puissance : Convertisseurs statiques (Redresseurs, Hacheurs, Onduleurs, Gradateurs).

🟠Automatique et Asservissement.

🟠Automatisme et systèmes embarqués.

🟠Électronique Analogique & Numérique : Logique, filtres, amplificateurs, etc.

🟠Capteurs et Détecteurs.

🟠Télécommunications : Modulation analogique (AM, FM) et numérique (ASK, FSK, PSK).

🟠Traitement du signal

🟠Aide aux Projets & Maîtrise Logicielle:
Je vous accompagne activement dans la réalisation de vos projets, notamment : conception et programmation sur microcontrôleurs (Arduino, ESP32, etc.).
Simulation et modélisation sous Proteus ISIS et MATLAB/SIMULINK.

Abdallah

4.38

(8)

I offer online tutoring in High School Mathematics & Physics, University Electronics/Electronic Circuits, and Turkish language.
Lessons are structured, clear, and focused on understanding + practice, with personalized plans, step-by-step solutions, and regular feedback.

Fayza

4.38

(8)

This class is designed for beginners who want to start learning robotics in a simple and practical way.

Students will learn the basics of electronics, Arduino programming, sensors, motors, and how to build small real-world projects step by step. No advanced background is required.

The course focuses on hands-on learning: connecting components, writing Arduino code, understanding how robots work, and creating mini projects such as smart fans, automatic lights, and simple robots.

By the end of the class, students will understand how hardware and software work together and will be able to build their own basic robotic systems.

This class is suitable for students, hobbyists, and anyone interested in robotics and technology.