Electrical Engineering - Electronic I, II, III - Microelectronics - IC Design - Cadence - ADS - Chip Design - PCB Design - RFIC

Electrical engineering is the foundation of modern technology, powering everything from household appliances to industrial automation. This class is designed to introduce beginners to the core concepts of electrical engineering, making complex topics easy to understand. You will learn about: Basic electrical concepts: Voltage, current, resistance, and power Circuit analysis techniques: Ohm’s Law, Kirchhoff’s Laws, and network theorems Introduction to electronic components: Resistors, capacitors, diodes, and transistors etc Hands-on projects using breadboards and simulation software By the end of this course, students will have a strong understanding of electrical fundamentals and be able to apply them in real-world applications, including Arduino and Raspberry Pi projects.

Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer for students of preparatory classes and technical high school support courses in the subjects of engineering sciences (Electronics, automatic, electrical engineering, automation, programming). Digital electronics Analog electronic electromagnetism Automatic electrical engineering (transformers, electrical machines, switching power supply) C / c ++ programming, Assembler, ARM, STM32 renewable energy (wind, PV) engineering Sciences RDM Python PIC microcontroller Microprocessor These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams. COURSE OBJECTIVES AND PEDAGOGICAL APPROACH Resumption and deepening of fundamental concepts through exercises with course reminders. Put the student in a situation of questioning and research. Respond to individual issues and questions Exercise training in order to achieve real mastery of the content. Learn to build theoretical reasoning from observable facts or hypotheses. Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background) This educational approach is effective since it has often led me to interesting results with my students. Associate professor provides support courses in electrical engineering

Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer support courses in the subjects of engineering sciences (Electronics, automatics, electrical engineering, automation, programming). Digital electronics Analog electronic electromagnetism (propagation of high frequency waves) Automatic (continuous, sampled) electrical engineering (transformers, electrical machines, switching power supply) C / c ++ programming, Assembler, ARM, STM32 renewable energy (wind, PV) engineering Sciences RDM Python,VHDL PIC Microprocessor and Microcontroller Signal processing and data acquisition Engineering Sciences These courses allow the student to get up to speed and regain confidence in all scientific subjects, just as they prepare him effectively for the Baccalaureate, the Preparatory Classes or various examinations of the engineering classes. COURSE OBJECTIVES AND PEDAGOGICAL APPROACH Resumption and deepening of fundamental concepts through exercises with course reminders. Put the student in a situation of questioning and research. Respond to individual issues and questions Exercise training in order to achieve real mastery of the content. Learn to build theoretical reasoning from observable facts or hypotheses. Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background) This educational approach is effective since it has often led me to interesting results with my students. Associate professor provides support courses in electrical engineering

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics. Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects. Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies. Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life. Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life. Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently. Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

I am a native english speaking academic with more than 20 years of teaching experience in the UK, Spain and Turkey. Teaching university electrical electronic engineering, physics and maths also at high school level. Also, i teach English for academic education abroad.

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School. I master the teaching of analog and digital electronics, covering components, integrated circuits and embedded systems. - Fundamentals of electronics: Definitions, basic concepts, Kirchhoff's laws. - Electronic components: Resistors, capacitors, inductors, diodes. - Operational amplifiers: Operation, characteristics, applications. - Basic analog circuits: Amplifiers, filters, oscillators. - Introduction to digital electronics: Binary logic, logic gates, combinational circuits. - Numbering systems: Conversion between bases, adders, subtractors. - Transistors: Bipolar transistors, field effect transistors, characteristics, applications. - Transistor amplifiers: Configuration, gain calculations, stability. - Analog integrated circuits: Voltage regulators, A/D and D/A converters. - Sequential digital systems: Flip-flops, registers, counters. - Microcontrollers and microprocessors: Architecture, basic programming, interfaces. - Analysis of electronic circuits: Frequency and time analysis methods. - Advanced analog circuits: Differential amplifiers, power amplifiers, active filters. - Modulation and demodulation techniques: AM, FM, PM. - Embedded systems: Design of real-time systems, communication between peripherals. - Test and measurement techniques: Oscilloscope, spectrum analyzer, signal generators. -

More than 10 years of experience teaching inside the Emirates for students of Colleges of Technology, Abu Dhabi University, Baynouna Institute and Emirates University. In addition to the work of projects for students and solutions for reports. The possibility of detailed explanation in an easy and simple way. Items that can be explained: Electrical and electronic circuits 1 and 2 - Digital circuits - Mathematics such as 1, 2 and 3 - Physics - Measurements - Machines - Engineering economics - Matlab - Communication - control - DSP - signals & systems - PLC All subjects of electrical engineering department Electronics I,II, Advanced Electronics, . Electrical and Electronics circuits 1 and 2 - Digital circuits -Digital logic- Mathematics with all its sections - Physics - Measurements -Instrumentation- Matlab - Analog and Digital Communications - DSP (Digital signal Processing)- signals and systems -Logic design- Control - economic Engineering - networks- PLC - micro. All electrical engineering subjects related

✅ Experienced teacher offering private online physics lessons for all levels. ✅ Fully dedicated and focused on student progress. ✅ Very patient, systematic, and organized. I teach a wide range of topics in physics, including but not limited to: 5- Physical quantities and units - Kinematics (types of motion, kinematics of point particles and rigid bodies) - Dynamics (frictional and inertial forces, Newton's laws) - Laws of conservation (energy, momentum) - Theory of collision processes - Inertial and non-inertial reference frames - Potential and kinetic energy - Gravitation and gravity fields - Oscillatory and wave motions - Harmonic oscillator - Doppler effect - Standing waves - Sound waves and physical characteristics of sound - Surface tension and capillary phenomena - Fluid mechanics - Temperature and heat - Calorimetry - Phase transitions - Principles of thermodynamics - Electrostatics - Electromagnetism - Kirchhoff's laws - Electronic circuits - Dielectrics - Optics ... and much more. If there are specific topics you would like to focus on or if you have any questions, feel free to let me know. I am here to help you deepen your understanding of physics.

أساسيات هندسة الإلكترونيات وبرمجة أردوينو ودوائر المنزل الذكي بدء التعليم من أساسيات الإكترونيات والمكونات الإلكترونية المختلفة والتوصيلات الكهربية المطلوبة لتصميم وبرمجة دوائر المنزل الذكي وانترنت الأشياء ماهو الأردوينو وماهي اللغة المطلوبة لبرمجته كيفية تصميم برامج للتحكم في المنزل من خلال التليفون المحمول التدريب على دوائر أردوينو حقيقية وأيضا على برامج المحاكاة

As an electronics engineering student with hands-on experience in robotics and a native speaker of Arabic, I’m excited to offer lessons that connect practical knowledge with a passion for learning. My goal is to inspire curiosity, build confidence, and provide engaging insights into both robotics and Arabic. Whether you’re a beginner exploring these fields or someone looking to deepen your understanding, I’m here to guide you step-by-step on your learning journey.

Teaching electrical and electronic engineering subjects through examples and practical explanations Examples of subjects that I can teach in Arabic and English: Microcontroller - Arduino - Embedded System - Electrical Machine - Power Electronics - Digital System Design - Digital Circuit - Programming in C And some other core subjects for electrical and electronic engineering major I am able to teach the Electrical and Electronics Engineering Subject with practical examples, some courses that I can teach: Microcontroller - Embedded System - Electrical Machine - Power Electronics - Digital System Design - Digital Circuit - Programming in C.

Discover the fundamental principles and practical applications of digital circuits and systems in this comprehensive course. From basic logic gates to complex integrated circuits, you'll learn how to design, analyze, and implement digital circuits using industry-standard tools and techniques. You'll delve into topics such as binary arithmetic, Boolean algebra, sequential and combinational logic, memory devices, and microprocessor fundamentals. Whether you're a beginner or an experienced enthusiast, this course will equip you with the knowledge and skills needed to excel in the exciting field of digital electronics. Join us on a journey into the digital realm and unlock the secrets of modern technology!

Discover the world of robotics, electronics, and programming with a course designed for technology and innovation enthusiasts. Whether you are a beginner or already have some basics, this course will guide you through the fundamentals, with a hands-on approach to designing your own projects. You will learn how to use electronic components, program microcontrollers, and assemble robots to perform autonomous tasks.

Civil engineer, with extensive experience in individual training, gives: >Maths, physics, chemistry, statistics, algebra, geometry, analysis >Electricity, automatic, electronic For secondary level up to master. I illustrate the theory on the basis of concrete examples thanks to my experience in the business environment.

💡 What you will learn: ✔️ The basics of IoT, robotics and embedded systems ✔️ Programming and using Arduino and ESP32 boards for connected and robotic applications ✔️ Wireless communication (WiFi, Bluetooth, MQTT) ✔️ Interface with sensors and actuators (temperature sensors, motors, displays, etc.) for your IoT and robotics projects ✔️ Creation of connected, autonomous and robotic projects ✔️ Deployment of an embedded web server for supervision 🎯 Who is this course for? 🔹 Beginners curious about IoT, robotics and electronics 🔹 Engineering students or technology enthusiasts 🔹 Professionals wishing to develop embedded and robotic solutions 📌 Course format: Online or face-to-face courses Practical exercises and mini-projects Personalized support 🚀 Join me to discover the fascinating world of connected objects, embedded systems and robotics!