Hi, I offer courses in mathematics, physics, as well as mechanical engineering courses for all levels (high school and university). As an engineer with a doctorate in mechanical engineering, I have a solid experience in teaching and I am passionate about supporting pupils and students towards success. Whether you are looking for academic support, exam preparation, or to deepen your knowledge in these subjects, I am here to help you with teaching methods adapted to your needs. Feel free to contact me for more information !

I give private lessons in Mathematics - Analysis - Matrices - Statistics - Algebra - Geometry - Physics - Chemistry - thermodynamics-fluid mechanics-RDM to students in French or Arabic programs. Homework help for Baccalaureate students. preparation for the competition. For more information, do not hesitate to contact me, guaranteed response in a few minutes up to 6 hours maximum.

Expert in teaching engineering subjects You will learn and understand civil engineering materials in the best modern ways and link them to practical reality. An assignment will be given after each lesson. and submit periodic reports on progress If you are a beginner, do not worry at all. All aspects of the material will be covered and PDF files will be given with each lesson.

This course provides a comprehensive introduction to the design of reinforced concrete structural elements according to Eurocode 2 (EN 1992-1-1). It is intended for students and professionals in structural and civil engineering who want to develop a solid understanding of concrete design in line with European standards. The course covers the fundamental principles of limit state design, material properties, and practical design procedures for beams, slabs, columns, and foundations. Emphasis is placed on correct application of Eurocode 2 provisions, including partial safety factors, load combinations, and serviceability checks. Students will gain hands-on experience through detailed design examples, reinforcement detailing, and structural drawings. Key Topics: Material properties and partial safety factors Ultimate and serviceability limit states Design of beams for bending, shear, and deflection Design of one-way and two-way slabs Column design (axial, uniaxial, and biaxial loading) Design of pad footings and strip foundations Crack width control and deflection checks Reinforcement anchorage, laps, and detailing rules Use of Eurocode 2 design aids and practical calculation methods Learning Outcomes: By the end of the course, learners will be able to: Understand and apply Eurocode 2 design principles to reinforced concrete structures Design structural elements including beams, slabs, columns, and foundations Perform checks for serviceability and durability Prepare reinforcement layouts and documentation in line with Eurocode 2 requirements

As a mechanical engineer, I offer tutoring in mathematics, physics and mechanical engineering, adapting each session to the specific needs of the student. My goal is to make these subjects clear and accessible while promoting understanding and practical application of concepts.

I am Engineer Abdel Rahman Abdel Aal, a university instructor specializing in explaining engineering subjects in a simplified and interactive manner via Zoom. God willing, our lessons aim to provide a deep and systematic understanding of the curriculum content, through simplified and interactive explanations that adapt to each student's level. 🔹 Short tests are given periodically to measure understanding and stimulate concentration, while clarifying the differences between similar concepts to prevent distraction. 🔹 I rely on various examples, patience, and gradual delivery of information in my explanation, until the student reaches full understanding with confidence. 🔹 There is continuous follow-up via WhatsApp or Telegram throughout the semester to answer questions and help the student with studying and solving problems as they occur. 💻 The explanation is conducted online via Zoom, with a full recording of each session provided, so that the student can review it at any time. 🎯 Our goal is not just to pass the subject, but to excel in it and understand it in an easy and consistent manner, God willing.

Engineering drawings are used to communicate design ideas and technical information to engineers and other professionals throughout the design process. An engineering drawing represents a complex three-dimensional object on a two-dimensional piece of paper or computer screen by a process called projection.

Hello civil engineering students, I am Engineer Mohamed. I am a civil engineer and I currently work as a teaching assistant at the university and I hold a master's degree in civil engineering. I provide engineering explanations for civil engineering, record the lectures for the student and send the explanation files in PDF format. I also provide continuous follow-up if you need to ask about anything related to the subject, I will always be with you.

Are you a university or high school student struggling with Civil Engineering, Math, Physics, or technical software? I’m here to help. I’m a Lebanese civil engineer with 5 years of hands-on experience in large-scale international projects across Africa and the Middle East. I specialize in structural concepts, construction planning, procurement, and estimation. I also teach core civil engineering software such as AutoCAD, Revit, Primavera P6, ETABS, and more. In our sessions, I tailor each lesson to your level and learning goals. Whether you're preparing for exams, needing help with assignments, or learning software tools for your career, I provide step-by-step guidance, real-world applications, and simplified explanations. Subjects I teach: Civil Engineering: Structures, project planning, estimation, procurement Math and Physics: High school and university level Engineering Software: AutoCAD, Revit, Primavera P6, ETABS, SAFE, Orgadata Logikal Lessons can be delivered in English, Arabic, French, or Portuguese, based on your preference. Let’s make learning practical, clear, and effective.

الحمد لله كفائة عالية مع شواهد أكاديمية و خبرة مكتسبة. شرح جيد مع لغة متقنة وتوفير جو للمراجعة والدعم للخروج بأحسن نتيجة ممكنة إنشاء الله. مع مراجعة قبلية لدروس لإنجاح الحصة والخروج بأكبر فائدة ممكنة، والانضباط لتعاليم المعلم وتوفير الأدوات المدرسية.

Mechanical engineering is a broad field that covers various topics related to the design, analysis, and manufacturing of mechanical systems. Here’s a brief overview of the core subjects you would typically study during a mechanical engineering program at university: Mathematics: Calculus: For understanding changes in systems, modeling dynamic behavior, and analyzing forces and motions. Linear Algebra: Used for solving systems of equations, matrix operations, and structural analysis. Differential Equations: Essential for modeling physical systems that change over time (e.g., motion, heat, fluid flow). Probability and Statistics: For analyzing data, reliability, and risks in engineering systems. Physics: Mechanics: Studying the forces and motion in solid bodies (statics and dynamics). Thermodynamics: Understanding energy systems, heat transfer, and the conversion of energy between mechanical forms. Fluid Mechanics: Focuses on the behavior of fluids (liquids and gases) in motion and at rest, which is essential for systems like pumps, engines, and turbines. Material Science: Exploring the properties of materials and how they behave under various conditions (stress, temperature, etc.). Statics and Dynamics: Statics: Study of forces in equilibrium, such as the forces on structures or machines that are not moving. Dynamics: Study of forces and motion in systems that are in motion, including vibrations, acceleration, and kinematics. Strength of Materials: Learning how materials respond to various forces, including stress, strain, bending, and torsion. This is essential for designing durable and safe structures and machines. Manufacturing Processes: Understanding different manufacturing techniques like casting, welding, machining, 3D printing, and material forming. Concepts of production planning, quality control, and design for manufacturability. Control Systems: Study of systems that maintain desired outputs (e.g., in robotics or automated systems). This includes understanding feedback loops and stability. Machine Design: Focus on designing mechanical components (gears, shafts, bearings) to perform specific tasks reliably and efficiently. Heat Transfer: Studying how heat moves through materials and fluids, which is critical for applications like engines, HVAC systems, and electronics cooling. Dynamics of Machinery: The study of moving mechanical components, their vibrations, and how to design them to minimize failure and wear. Computational Methods: Learning how to use software tools (like CAD, FEM, and CFD) for designing, simulating, and analyzing mechanical systems. Robotics and Automation: Study of robotic systems, automation in manufacturing, and how to integrate mechanical components with electronic control systems. Renewable Energy and Sustainability: Topics related to sustainable engineering solutions, energy-efficient systems, and the use of renewable energy sources (wind, solar, etc.).

Here is a short description for each area: 1. Civil Engineering This course provides an introduction to the fundamentals of civil engineering, including blueprint reading, construction techniques, site management, and the use of professional software such as AutoCAD and Robot Structural Analysis. Ideal for students, technicians, and anyone interested in the construction industry. 2. Computer science (Word & Excel) A practical course to master essential office tools: Word for professional writing (reports, resumes, formatted documents) and Excel for automatic calculations, tables, graphs, and data management. Perfect for students, employees, or job seekers. 3. Languages (Arabic, French, English) Courses tailored to all levels to improve oral and written communication, grammar, pronunciation, and vocabulary. Whether for study, work, or travel, courses are personalized to suit your schedule.

I offer specialized lessons in civil engineering subjects for students and engineers, whether at the undergraduate level or for those wishing to develop their engineering skills. The lessons cover theoretical and practical aspects, with practical applications using modern engineering software. Subjects taught: ✅ Soil Mechanics and Foundations – Analysis of soil properties and design of foundations according to engineering standards. ✅ Structural Engineering – Design and analysis of concrete and steel structures using software such as ETABS, SAFE and SAP2000. ✅ Structural Analysis – Study of forces and stresses in various structures. ✅ Geotechnical Engineering – Study of slope stability, design of retaining walls and analysis of soil stresses. ✅ Engineering Project Management – Learn to manage time, cost and quality with Primavera P6. ✅ Seismic engineering and design of earthquake-resistant buildings – according to international standards such as SBC, IBC and Eurocode. ✅ Modeling and analysis programs (Finite Element Analysis) – such as PLAXIS 3D for designing and analyzing soils and structures. Teaching style: 📌 Individual or group lessons according to the student's needs. 📌 Online or in-person teaching within the Kingdom of Saudi Arabia. 📌 Use practical examples and real-life projects to enhance understanding and practical application. 📌 Preparing students for exams and projects and helping them understand and solve complex engineering problems. 💡 Who are these lessons suitable for? Civil engineering students at all levels of study. Engineers who want to improve their design and analysis skills. Those who are about to take exams such as FE, PE or engineering recruitment tests. 📞 To communicate and book lessons: 📍 Available in Saudi Arabia - online or in person ⚡ Learn engineering in a practical and applied way that helps you excel in your studies or work!

Hello everyone and have a nice day, As a teacher, teacher, student, teacher, professional teacher, and professional student/coaching/unterstützung in MATLAB/Simulink/embedded programme/automatic code generation...etc., you can also contact him. Use this device for your Master Elektrotechnik-Ingenieur with a new academic design and installation tool in the basic model and use the Matlab/Simulink-Model for embedded System and Regelung on the E-Motoren with a fan and pass it. and Anforderungen. For more information, please contact us. Unterstützung professionelle in Matlab, Simulink, C, Microcontroller and embedded Programmierung an. There is a lot of expertise in this article, too: - Matlab, Simulink, - S-Functions, Simulink Modelle, Model Basierte Programmierung and Code Generation, - Electrical drives and E-Motoren, - STM32 Microcontroller, - Rapid Prototyping mittels dSPACE HiL-Systeme and Echtzeit-Systeme, - Power electronics / Leistungselektronik, - Betreuung and Unterstützung während verschiedenenenenenen der projecterbeiten, - ... There is a lot of contact with you. Very nice greetings

أنا عمر من الأردن، مهندس ميكانيكي حاصل على درجة الماجستير، أعمل في مجال التعليم الجامعي وأحب تبسيط المفاهيم المعقدة للطلبة. أستمتع بتعليم الرياضيات والفيزياء والهندسة الميكانيكية، وأسعى دائماً لتطوير نفسي وتعلم كل ما يساعدني على إيصال المعلومة بشكل أفضل وأكثر تفاعلًا.