Recentelijk actief
Betrouwbare leraar
Deze leraar antwoordt snel. Dit getuigt van een goede dienstverlening naar haar of zijn leerlingen toe.
Sinds december 2020
Leraar sinds december 2020
BMS Cost Estimation & Presales Online Course (Beginner to Advanced)
Van 18.21 $ /h
Online sessions focused on real projects, HVAC controls, and technical office workflows.
This course is designed for engineers who want to build strong skills in BMS design, estimation, and tendering, with a clear understanding of how systems work in real-life projects.
You will gain hands-on experience in:
• BMS fundamentals and system architecture (Controllers, field devices, network)
• Understanding HVAC systems for BMS (AHU, FCU, Chillers, Pumps)
• Identifying and calculating I/O points (DI, DO, AI, AO)
• Selecting field devices (sensors, actuators, valves, dampers)
• Preparing BMS BOQ (Bill of Quantities) professionally
• Cost estimation and pricing techniques for real tenders
• Reading and analyzing project specifications and drawings
• Preparing technical submittals and compliance sheets
• Creating BMS shop drawings and control schematics
• Introduction to Sauter BMS controllers and solutions
• Real case studies from actual projects and tender documents
The course is fully practical and job-oriented, where you will simulate real technical office and presales tasks, not just theory.
Perfect for:
• Mechanical & Electrical engineers
• Fresh graduates entering the BMS / ELV field
• Engineers shifting to technical office or presales roles
• Anyone interested in HVAC controls and smart building systems
Build real skills in BMS estimation, HVAC control design, and presales engineering, and become ready to work on real projects with confidence. 🚀
This course is designed for engineers who want to build strong skills in BMS design, estimation, and tendering, with a clear understanding of how systems work in real-life projects.
You will gain hands-on experience in:
• BMS fundamentals and system architecture (Controllers, field devices, network)
• Understanding HVAC systems for BMS (AHU, FCU, Chillers, Pumps)
• Identifying and calculating I/O points (DI, DO, AI, AO)
• Selecting field devices (sensors, actuators, valves, dampers)
• Preparing BMS BOQ (Bill of Quantities) professionally
• Cost estimation and pricing techniques for real tenders
• Reading and analyzing project specifications and drawings
• Preparing technical submittals and compliance sheets
• Creating BMS shop drawings and control schematics
• Introduction to Sauter BMS controllers and solutions
• Real case studies from actual projects and tender documents
The course is fully practical and job-oriented, where you will simulate real technical office and presales tasks, not just theory.
Perfect for:
• Mechanical & Electrical engineers
• Fresh graduates entering the BMS / ELV field
• Engineers shifting to technical office or presales roles
• Anyone interested in HVAC controls and smart building systems
Build real skills in BMS estimation, HVAC control design, and presales engineering, and become ready to work on real projects with confidence. 🚀
Extra informatie
To get the best results from the sessions, it is recommended that you:
• Have a basic understanding of HVAC systems (AHU, FCU, Pumps is a plus but not mandatory)
• Be familiar with engineering drawings (PDF / AutoCAD)
• Have a laptop with stable internet for live online sessions
• Be ready to practice through assignments and real project exercises
During the course, you will:
• Work on real project examples and tender documents
• Practice I/O point calculations and BMS design concepts
• Learn how to prepare BOQ, cost estimation, and technical submittals
• Gain skills required for technical office and presales roles
You will also receive continuous guidance, feedback on assignments, and support to ensure you fully understand each topic.
• Have a basic understanding of HVAC systems (AHU, FCU, Pumps is a plus but not mandatory)
• Be familiar with engineering drawings (PDF / AutoCAD)
• Have a laptop with stable internet for live online sessions
• Be ready to practice through assignments and real project exercises
During the course, you will:
• Work on real project examples and tender documents
• Practice I/O point calculations and BMS design concepts
• Learn how to prepare BOQ, cost estimation, and technical submittals
• Gain skills required for technical office and presales roles
You will also receive continuous guidance, feedback on assignments, and support to ensure you fully understand each topic.
Locatie
Plaats gekozen door de student :
- In de omgeving van Caïro, Egypte
Over
I am Ahmed, a Mechanical Engineer and SolidWorks Online Tutor with more than 5 years of teaching experience helping students and engineers master 3D CAD design, mechanical modeling, and technical drawings using SolidWorks.
My teaching approach focuses on practical learning, real engineering exercises, and structured training to ensure you gain strong skills in 2D sketching, 3D part modeling, assemblies, and engineering drawings.
During our live online sessions, I guide you step-by-step while we design real models together. You will practice with hands-on assignments, design challenges, and professional exercises that help you build real experience and confidence using SolidWorks.
My goal is not only to teach software tools, but also to help you think like a design engineer, improve your problem-solving skills, and build a strong CAD portfolio that can support your academic or professional career.
If you want to learn SolidWorks professionally, improve your CAD skills, or start your journey in mechanical design, feel free to contact me and start learning today.
My teaching approach focuses on practical learning, real engineering exercises, and structured training to ensure you gain strong skills in 2D sketching, 3D part modeling, assemblies, and engineering drawings.
During our live online sessions, I guide you step-by-step while we design real models together. You will practice with hands-on assignments, design challenges, and professional exercises that help you build real experience and confidence using SolidWorks.
My goal is not only to teach software tools, but also to help you think like a design engineer, improve your problem-solving skills, and build a strong CAD portfolio that can support your academic or professional career.
If you want to learn SolidWorks professionally, improve your CAD skills, or start your journey in mechanical design, feel free to contact me and start learning today.
Opleiding
Faculty of engineering, Helwan University
Mechanical department, Mechatronics Engineering devision, GPA = 3.7
Secondary school, Zahraa Helwan Secondary school 98%
Mechanical department, Mechatronics Engineering devision, GPA = 3.7
Secondary school, Zahraa Helwan Secondary school 98%
Leservaring
• Founder & SolidWorks Instructor – CADit Academy (06/2024 – Present)
Providing professional SolidWorks training and CAD education, teaching students and engineers 3D modeling, assemblies, sheet metal, and engineering drawings through structured courses and practical design exercises.
• SolidWorks Instructor – CAMTECH Egypt (06/2024 – Present)
Delivering hands-on SolidWorks training programs focused on parametric design, mechanical modeling, and industry-based projects for engineering students and professionals.
• SolidWorks Instructor – Pixels Egypt (09/2021 – 06/2022)
Taught SolidWorks fundamentals and advanced design techniques, helping students build strong CAD skills and practical engineering experience.
Certifications
• SOLIDWORKS Certified – CSWA (Certified SolidWorks Associate)
• SOLIDWORKS Certified – CSWPA-SM (Sheet Metal Specialist)
Providing professional SolidWorks training and CAD education, teaching students and engineers 3D modeling, assemblies, sheet metal, and engineering drawings through structured courses and practical design exercises.
• SolidWorks Instructor – CAMTECH Egypt (06/2024 – Present)
Delivering hands-on SolidWorks training programs focused on parametric design, mechanical modeling, and industry-based projects for engineering students and professionals.
• SolidWorks Instructor – Pixels Egypt (09/2021 – 06/2022)
Taught SolidWorks fundamentals and advanced design techniques, helping students build strong CAD skills and practical engineering experience.
Certifications
• SOLIDWORKS Certified – CSWA (Certified SolidWorks Associate)
• SOLIDWORKS Certified – CSWPA-SM (Sheet Metal Specialist)
Leeftijd
Kinderen (7-12 jaar oud)
Tieners (13-17 jaar oud)
Volwassenen (18-64 jaar oud)
Senioren (65+ jaar oud)
Niveau van de leerling
Beginner
Gemiddeld
Gevorderden
Duur
45 minuten
60 minuten
De les wordt gegeven in
Engels
Arabisch
Vaardigheden
Beschikbaarheid typische week
(GMT -04:00)
New York
Bij de student thuis
Mon
Tue
Wed
Thu
Fri
Sat
Sun
00-04
04-08
08-12
12-16
16-20
20-24
Master ELV (Extra Low Voltage) systems cost estimation and presales through practical, real-project-based online sessions covering Fire Alarm, CCTV, and Access Control systems.
This course is designed to help engineers understand the full workflow of technical office and presales roles, from studying tender documents to preparing BOQ, pricing, and technical submittals.
You will gain hands-on experience in:
• ELV systems overview and integration concepts
• Fire Alarm systems design & estimation (Conventional & Addressable – Hochiki systems)
• CCTV systems design (camera selection, storage, coverage, VMS basics – Honeywell solutions)
• Access Control systems (doors, readers, controllers – Lenel systems)
• Preparing BOQ (Bill of Quantities) for ELV systems
• Cost estimation and pricing strategies for tenders
• Reading and analyzing project drawings and specifications
• Preparing technical submittals and compliance sheets
• Understanding technical office routine and documentation cycle
• Basics of value engineering and alternative proposals
• Real case studies from actual projects and tenders
The course is fully practical and career-focused, simulating real presales and technical office tasks used in companies.
Perfect for:
• Electrical & Mechanical engineers
• Fresh graduates entering the ELV field
• Engineers shifting to presales or technical office roles
• Anyone interested in Fire Alarm, CCTV, and Access Control systems
Build strong skills in ELV design, estimation, and presales engineering, and become ready to work on real projects with confidence.
This course is designed to help engineers understand the full workflow of technical office and presales roles, from studying tender documents to preparing BOQ, pricing, and technical submittals.
You will gain hands-on experience in:
• ELV systems overview and integration concepts
• Fire Alarm systems design & estimation (Conventional & Addressable – Hochiki systems)
• CCTV systems design (camera selection, storage, coverage, VMS basics – Honeywell solutions)
• Access Control systems (doors, readers, controllers – Lenel systems)
• Preparing BOQ (Bill of Quantities) for ELV systems
• Cost estimation and pricing strategies for tenders
• Reading and analyzing project drawings and specifications
• Preparing technical submittals and compliance sheets
• Understanding technical office routine and documentation cycle
• Basics of value engineering and alternative proposals
• Real case studies from actual projects and tenders
The course is fully practical and career-focused, simulating real presales and technical office tasks used in companies.
Perfect for:
• Electrical & Mechanical engineers
• Fresh graduates entering the ELV field
• Engineers shifting to presales or technical office roles
• Anyone interested in Fire Alarm, CCTV, and Access Control systems
Build strong skills in ELV design, estimation, and presales engineering, and become ready to work on real projects with confidence.
Designed for students, engineers, and professionals who want to master 3D CAD modeling and product design.
In this course, you will develop strong practical skills in SolidWorks 3D modeling, parametric design, assemblies, and engineering drawings using real engineering exercises and industry techniques.
Whether you are a complete beginner, an engineering student, or a professional who wants to improve CAD skills, the lessons are customized to your level and goals.
What you can learn in these SolidWorks lessons:
• SolidWorks interface and professional workflow
• 2D Sketching fundamentals and fully defined sketches
• 3D Part Modeling (Extrude, Revolve, Sweep, Loft, Patterns, Fillets)
• Parametric design and design intent
• Assemblies and mechanical motion
• Technical drawings and manufacturing documentation
• Sheet metal and surface modeling
• Design for manufacturing (DFM) basics
• Creating a professional engineering portfolio
• Preparing for SolidWorks exams or engineering interviews
My teaching approach focuses on practical exercises, real design problems, and industry tips so students gain skills that are immediately useful in mechanical engineering, product design, and manufacturing.
Lessons are fully online and interactive, with screen sharing, live modeling, and hands-on guidance to ensure you truly understand the tools and techniques.
Perfect for:
• Mechanical engineering students
• Product designers
• CAD beginners
• Engineers wanting to upgrade their SolidWorks skills
• Anyone interested in 3D design and mechanical modeling
Start learning SolidWorks professionally and build real engineering skills.
In this course, you will develop strong practical skills in SolidWorks 3D modeling, parametric design, assemblies, and engineering drawings using real engineering exercises and industry techniques.
Whether you are a complete beginner, an engineering student, or a professional who wants to improve CAD skills, the lessons are customized to your level and goals.
What you can learn in these SolidWorks lessons:
• SolidWorks interface and professional workflow
• 2D Sketching fundamentals and fully defined sketches
• 3D Part Modeling (Extrude, Revolve, Sweep, Loft, Patterns, Fillets)
• Parametric design and design intent
• Assemblies and mechanical motion
• Technical drawings and manufacturing documentation
• Sheet metal and surface modeling
• Design for manufacturing (DFM) basics
• Creating a professional engineering portfolio
• Preparing for SolidWorks exams or engineering interviews
My teaching approach focuses on practical exercises, real design problems, and industry tips so students gain skills that are immediately useful in mechanical engineering, product design, and manufacturing.
Lessons are fully online and interactive, with screen sharing, live modeling, and hands-on guidance to ensure you truly understand the tools and techniques.
Perfect for:
• Mechanical engineering students
• Product designers
• CAD beginners
• Engineers wanting to upgrade their SolidWorks skills
• Anyone interested in 3D design and mechanical modeling
Start learning SolidWorks professionally and build real engineering skills.
Contacteer Ahmed
1e les wordt ondersteund
door onze Good-fit Leraar Garantie
door onze Good-fit Leraar Garantie
Good-fit Leraar Garantie
Contacteer Ahmed