Abdelali
    Trusted teacher
    FavouritesAdd to Wish List
    FavouritesAdd to Wish List
    Trusted teacher
    from27.34USD/ h

    Electricity / Electronics Course: Electric Circuits & Systems

    Translated using Google Translate. Click to view original.
    Hello, I am an engineer and doctor in electrical engineering and professor of higher education in engineering sciences, experienced in the field of electrical engineering, I offer for graduate students support courses and training in the subjects engineering sciences, in particular in electrical circuits and electricity. My methodology is based on the acquisition of knowledge and course concepts in a very simple way and also on practice using the most widely used software on the market.

    The "electrical circuits" course is an essential element of the "engineering sciences" module, or industrial engineering sciences, which brings together scientific disciplines related to the engineering profession, particularly in the field of electrical engineering. .

    It deals with the basics of electricity: from the notion of a circuit, to the various existing electrical components, to the resolution of problems and exercises using general theorems.

    At the end of this course, the student must be able to:
    Analyze in continuous mode and in sinusoidal mode the electrical circuits based on passive components;
    Use the theoretical knowledge necessary for solving electrical problems;
    Use the theoretical knowledge necessary for the proper conduct of practical work;
    Carry out and analyze electrical circuits on design and simulation software used by engineers;

    I also give courses and training in:

    Electrical and electronic circuits
    Automatic
    Industrial regulation
    Signal processing
    C / c ++ programming, Assembler, PIC, Arduino
    Matlab
    LabVIEW
    PIC microcontroller
    Microprocessor

    Location

    Online via webcam
    At student's location: Around Rabat, Morocco

    |
    Use ⊞+wheel to zoom!
    +

    General info

    Skills:
    Age:
    Children (7-12 years old)
    Teenagers (13-17 years old)
    Adults (18-64 years old)
    Seniors (65+ years old)
    Student level:
    Beginner
    Intermediate
    Advanced
    Duration:
    60 minutes
    The class is taught in:French, English, Arabic

    About Me

    Translated using Google Translate. Click to view original.
    Hello, I am an engineer and doctor in electrical engineering and professor of higher education in engineering sciences, experienced in the field of electrical engineering, I offer for graduate students support courses and training in the subjects engineering sciences (Electronics, automation, industrial regulation, signal processing, automation, microcontroller programming, Matlab / Simulink, LabVIEW).

    My methodology is based on the acquisition of knowledge and course concepts in a very simple way and also on practice using the most widely used software on the market.

    The courses and training I give are:

    Electrical and electronic circuits
    Automatic
    Industrial regulation
    Signal processing
    C / c ++ programming, Assembler, PIC, Arduino
    Matlab
    LabVIEW
    PIC microcontroller
    Microprocessor

    Education

    Translated using Google Translate. Click to view original.
    Doctor of Engineering Sciences
    Engineer in electrical engineering and industrial computing
    Professional bachelor's degree in electrical engineering and industrial computer science
    University degree in technologies in electrical engineering and industrial computer science

    Experience / Qualifications

    Translated using Google Translate. Click to view original.
    5 years of experience in higher education in an engineering school
    Teaching of subjects related to electrical engineering
    Hello, I am an engineer and doctor in electrical engineering and professor of higher education in engineering sciences, experienced in the field of electrical engineering, I offer for graduate students support courses and training in the subjects engineering sciences, particularly in Matlab Simulink programming. My methodology is based on the acquisition of knowledge and course concepts in a very simple way and also on practice using the most widely used software on the market. Matlab is both a software and a scientific programming language developed by the American company MathWorks which makes it possible to perform various numerical calculation operations. For example, the manipulation of algorithms, the display of data curves or even the generation of matrices. It is used in all that is programming, signals and systems, signal processing ... It contains another part of graphic programming called Simulink, dedicated to the programming and modeling of dynamic systems (Widely used in the discipline of automation and industrial regulation). I also give courses and training in: Electrical and electronic circuits Automatic Industrial regulation Signal processing C / c ++ programming, Assembler, PIC, Arduino LabVIEW PIC microcontroller Microprocessor
    Hello, I am an engineer and doctor in electrical engineering and professor of higher education in engineering sciences, experienced in the field of electrical engineering, I offer for graduate students support courses and training in the subjects engineering sciences, particularly in Automation and industrial regulation. My methodology is based on the acquisition of knowledge and course concepts in a very simple way and also on practice using the most widely used software on the market. Automation is the discipline which, in general, deals with the control of systems. It therefore takes on a very important character in the industrial field to which it provides both solutions, study methods and systematic analysis approaches. It is a scientific discipline that studies dynamic systems, signals and information, for the purpose of driving or making decisions. This course is made up of 6 chapters divided as follows: Chapter 1: Introduction to automation & servo systems Chapter 2: Mathematical modeling of SLCIs Chapter 3: Time & frequency analysis of SLCIs Chapter 4: Command of SLCIs & algebra of block diagrams Chapter 5: Stability & performance of SLCIs Chapter 6: Correction and regulation of servo systems I also give courses and training in: Electrical and electronic circuits Automatic Industrial regulation Signal processing C / c ++ programming, Assembler, PIC, Arduino Matlab LabVIEW PIC microcontroller Microprocessor

    Ask a question

    Send a message explaining your needs and Abdelali will reply soon:
    The more detail, the better.
    Ex. "Hi, when are you available to meet for a lesson?"

    Availability of a typical week

    (GMT -04:00) New York
    MonTueWedThuFriSatSun
    0              
    1              
    2              
    3            Saturday at 3:00  Sunday at 3:00
    4            Saturday at 4:00  Sunday at 4:00
    5            Saturday at 5:00  Sunday at 5:00
    6            Saturday at 6:00  Sunday at 6:00
    7            Saturday at 7:00  Sunday at 7:00
    8            Saturday at 8:00  Sunday at 8:00
    9            Saturday at 9:00  Sunday at 9:00
    10            Saturday at 10:00  Sunday at 10:00
    11            Saturday at 11:00  Sunday at 11:00
    12            Saturday at 12:00  Sunday at 12:00
    13  Monday at 13:00  Tuesday at 13:00  Wednesday at 13:00  Thursday at 13:00  Friday at 13:00  Saturday at 13:00  Sunday at 13:00
    14  Monday at 14:00  Tuesday at 14:00  Wednesday at 14:00  Thursday at 14:00  Friday at 14:00  Saturday at 14:00  Sunday at 14:00
    15  Monday at 15:00  Tuesday at 15:00  Wednesday at 15:00  Thursday at 15:00  Friday at 15:00  Saturday at 15:00  Sunday at 15:00
    16  Monday at 16:00  Tuesday at 16:00  Wednesday at 16:00  Thursday at 16:00  Friday at 16:00  Saturday at 16:00  Sunday at 16:00
    17  Monday at 17:00  Tuesday at 17:00  Wednesday at 17:00  Thursday at 17:00  Friday at 17:00  Saturday at 17:00  Sunday at 17:00
    18  Monday at 18:00  Tuesday at 18:00  Wednesday at 18:00  Thursday at 18:00  Friday at 18:00  Saturday at 18:00  Sunday at 18:00
    19              
    20              
    21              
    22              
    23              
    from $27.34Online via webcam
    from $32.73At student's home

    Good-fit Instructor Guarantee


    If you are not satisfied after your first lesson, Apprentus will find you another instructor or will refund your first lesson.

    Online reputation

    • Instructor since September 2021
    • Phone number verified
    • Google connected
    • Linkedin connected

    Availability of a typical week

    (GMT -04:00) New York
    MonTueWedThuFriSatSun
    0              
    1              
    2              
    3            Saturday at 3:00  Sunday at 3:00
    4            Saturday at 4:00  Sunday at 4:00
    5            Saturday at 5:00  Sunday at 5:00
    6            Saturday at 6:00  Sunday at 6:00
    7            Saturday at 7:00  Sunday at 7:00
    8            Saturday at 8:00  Sunday at 8:00
    9            Saturday at 9:00  Sunday at 9:00
    10            Saturday at 10:00  Sunday at 10:00
    11            Saturday at 11:00  Sunday at 11:00
    12            Saturday at 12:00  Sunday at 12:00
    13  Monday at 13:00  Tuesday at 13:00  Wednesday at 13:00  Thursday at 13:00  Friday at 13:00  Saturday at 13:00  Sunday at 13:00
    14  Monday at 14:00  Tuesday at 14:00  Wednesday at 14:00  Thursday at 14:00  Friday at 14:00  Saturday at 14:00  Sunday at 14:00
    15  Monday at 15:00  Tuesday at 15:00  Wednesday at 15:00  Thursday at 15:00  Friday at 15:00  Saturday at 15:00  Sunday at 15:00
    16  Monday at 16:00  Tuesday at 16:00  Wednesday at 16:00  Thursday at 16:00  Friday at 16:00  Saturday at 16:00  Sunday at 16:00
    17  Monday at 17:00  Tuesday at 17:00  Wednesday at 17:00  Thursday at 17:00  Friday at 17:00  Saturday at 17:00  Sunday at 17:00
    18  Monday at 18:00  Tuesday at 18:00  Wednesday at 18:00  Thursday at 18:00  Friday at 18:00  Saturday at 18:00  Sunday at 18:00
    19              
    20              
    21              
    22              
    23              
    from $27.34Online via webcam
    from $32.73At student's home

    Good-fit Instructor Guarantee


    If you are not satisfied after your first lesson, Apprentus will find you another instructor or will refund your first lesson.

    Share


    Matías
    Electronics, programming and robotics with ARDUINO and ESP32
    ARDUINO is a free hardware microcontroller. It is very useful for learning electronics and coding at the same time. It is very estimating thanks to that we can solve problems and look at the results physically. Thanks to the size of its community and the openness of its philosophy, information is widely accessible. Arduino allows us to undertake countless projects of all kinds. In a way, it's a small door through which you can easily access the world of makers. Among others. In the particular case of the arduino, my main goal is to stimulate creativity and curiosity. In addition to allowing my student to acquire a level of competence which allows him to function alone. I am used to working with people of different ages. I believe in segmentation, visualization of progress, objective results and practice. Beyond these general lines, there is no rule or magic method. Some things work with some students and not with others. Adapting to needs is really the goal of private lessons. So I will do my best to find what motivates and helps my student.

    Youssef
    Industrial IT, telecommunications, Network, biomedical instrumentation Electronics: analog, digital, Variable speed drive
    Give the most desired. motivate the student on the day of the exam. Associate Professor in Engineering Sciences SKILLS Engineering Sciences Embedded system (microcontrollers, z80 microprocessors, Motorola, ARM), Real-time system, network concept (OSI, TCP / IP), design of electronic systems and boards (analog, digital, power supply), signal processing, communication protocols ( SPI, I2C, CAN BUS, UART ...), telecommunications. Technical skills : Languages: C / C ++, JAVA, VHDL / VERILOG, Python, Assembler. Professional software: MATLAB, SIS + PSIM + PSpice, QUARTUS, IDE68, Mikro C, Xilinix ISE, Labview, CoIDE. Technologies: Siemens PLC, Allen bradeley, STM32, FPGA, TIA Portal, STEP7, RSLogix Electrical accreditation: NF C18-510 standard  Electrical engineering: Electric motors, Transformers • Noise and vibration of asynchronous motors • Speed variator • Study and implementation of LV / MV standards • Electrical accreditation: NF C18-510 standard • NF C 15-100 electrical installations • Management of electrical energy in networks (Continuous Power Flow)  Renewable energies: study of the pumping installation solar and wind power plant.  Electronics: analog, digital, electronic control power, system electronics and instrumentation biomedical.  Networks and telecommunications.  Industrial IT and programmable logic controllers.  Automatic: modeling, identification and control of systems.  Mechatronics.

    Abdallah
    Learn Analog Electronics With an Engineer and Graduate Professor.
    By being an engineer who has experienced all the possibilities of stress that a student can encounter when understanding it, a teacher who has encumbered an experience for years, I have developed teaching and efficient methods in order to better explain to my students. For me, a student needs a logical explanation of things and a personalized follow-up in order to be able to better advance and develop their own skills. Distance courses: ----------------------------------- I can give distance lessons perfectly since I have a tablet on which I can work in the same way as if it were a notebook. The student can see everything I do live through screen sharing, and all they need is to use a computer. At the end of the course, I send him a copy of all the work done, which allows me to make sure that he has kept a clean record of the course spent together. Domains : -------------------------------------------------- ------------------ * Analog electronic: ------------------------------------------- - Semiconductor and PNP Junction - Diodes and transistors - Bipolar transistors and JFET (Static and dynamic analysis) - Operational amplifier in linear and non-linear mode - Frequency analysis (Bode, Nichols, Nyquist diagram ...) - Analog filtering - Analog Oscillator - Converters: CAN and CNA - Modulation - Differential amplifier - ... * Electrical engineering: -------------------------------- - Single-phase network - Three-phase network - Coil and magnetic circuit - Single-phase and three-phase transformers - Direct current machine (MCC) - Asynchronous Machine (MAS) - Synchronous Machine (MS) - Speed variators -.... * Power electronics: ---------------------------------------------- - Choppers - Rectifiers - Inverters - Dimmers - Speed variator -.... * Digital Electronics: ------------------------------------------- - Boolean algebra - Combinatorial systems - Sequential systems - Counters and decounters - Registers and memories - .... * Industrial Automation: ---------------------------------------- - Grafcet and GEMMA - State graph / state diagram - Programmable controllers (Siemens, Schnieder ...) - Programmable circuits (Microcontrollers, arduino ...) -.... * Linear automatic - Servo-control and regulation: -------------------------------------------------- ----------------------------------- - Laplace transformation - Transfer function - Functional diagrams - Dynamic performance of linear systems: Speed, Precision and Stability - The correctors: P, PI, PID, phase advance, phase delay, ... - Regulation and servoing - Digital servo -.... -------------------------------------------------- --------------- Additional Information Zoom or Google meet Whiteboard Anyway, I'll be there to help you move forward and love this area more. Are you ready to experience this learning adventure with me?

    Monther
    Electrical and Electronics Engineering, Microcontroller Projects
    Teaching electrical and electronic engineering subjects through examples and practical explanations Examples of subjects that I can teach in Arabic and English: Microcontroller - Arduino - Embedded System - Electrical Machine - Power Electronics - Digital System Design - Digital Circuit - Programming in C And some other core subjects for electrical and electronic engineering major I am able to teach the Electrical and Electronics Engineering Subject with practical examples, some courses that I can teach: Microcontroller - Embedded System - Electrical Machine - Power Electronics - Digital System Design - Digital Circuit - Programming in C.

    Marko
    Physics for all levels from Elementary school to University
    ✅ Experienced teacher gives private online lectures for all levels in physics ✅ Fully dedicated and focused on student progress ✅ Very patient, systematic and organized I teach many fields of physics, but some of them are the following: - physical quantities and units - kinematics (movement types, kinematics of material point and rigid body) - dynamics (frictional and inertial forces, Newton's laws) - laws of conservation - theory of collision processes - inertial and non-inertial systems - potential and kinetic energy - gravitation and gravity field - oscillatory and wavy motions - harmonic oscillator - Doppler's effect - standing waves - sound waves and physical sound characteristics - surface tension and capillary phenomena - fluid mechanics - temperature and heat - calorimetry - phase switches - principles of thermodynamics - electrostatics - electromagnetism - Kirchoff's law - electronic circuits - dielectrics - optics ... etc.

    elMehdi
    Electronics, robotics and electric auromatomation.
    im Engineer in Electronics and Automation and holder of a specialization in Electromechanical Automation Systems, Teaching electrical engineering and electronics subjects using examples and practical explanations Examples of subjects I can teach in French and Arabic: (Microcontrollers - Arduino - Embedded Systems - Motors - Power Electronics - Digital System Design - Digital Circuits - C... etc) . Programming and some other core courses in electrical engineering and electronics

    Mouna
    Electrical engineering and electrotechnical industrial engineering power electronics
    Doctor in electrical engineering I know exactly how difficult it is to write an article especially the first articles, even more in English. Admittedly, well-known newspapers, especially those indexed scopus, are very demanding, but don't worry, I'll give you the keys to a well-written article that will, above all, be published. The keys that allowed me to publish my articles in many journals indexės scopus (taylor and francis, ijpeds....)

    Yassine
    Electrical, Electronic and Industrial Computer Engineering
    This course is dedicated to students in higher education specializing in electrical engineering, electronics and industrial computing. the main subjects are: - Digital electronics - Analog electronic - Electrical engineering - Industrial data

    Mostafa
    Electrical, Electronic and communication Engineering Class
    I only give online classes or help in assignments or projects. but doing exams or assignments or projects with my own without any efforts from you is not allowed. Hello Everyone, I am a postgraduate student in electrical engineering. I have bachelor of Engineering in Electrical and communication engineering. I've been teaching electrical engineering courses for 2 years. The courses I am teaching are 1-Electric circuits 2-signal and systems 3-electromagnetic fields 4-electromagnetic waves 5-transmission line theory 6-microwave engineering 7-antennas and propagation of radio waves Also I can give tutorials on simulation softwares dedicated for these courses. the simulations softwares are MATLAB, Multisim, ADS, Ansys Electronics, CST. I have my digital pen and my online whiteboard, so I can share my white board online. I also have, 3D scientific visualization experience. So, I have 3D visualization for the electromagnetic concepts. at the end, I'm happy to connect and help you and I hope you to fully understand these courses and do well in their exams.

    Arianit
    Electrical Engineering I (Beginner basics for students who started a degree in Engineering)
    Being at the end of my studies I am offering Electrical Engineering I tutorials for beginner students that need a bit of more information on the following topics: •Electrical Engineering Basics •Passive components •Circuit Analysis (Thevenin, Kirchoff and Helmholtz approaches) •Three-phase systems

    Viswambher
    Electronic Power Conversion : Course which deals with converters, inverters and other power electronic components.
    EPC could be a nightmare for SET students at the TU Delft, especially those who do not have a background in Electrical Engineering. I am a second year SET student with an Electrical Engineering background. I scored a 9/10 on my first attempt and would be offering classes in TU Campus. In this class , we go through all the concepts taught in the class, have doubts sessions and exam preparation sessions. Even if you are an absolute beginner, there is nothing to worry since I would explain everything in as simple terms as simple terms as possible. Group lessons are also available.

    Karlmarx
    Microcontroller(8051) Microprocessor(8085) Sensors and Actuators
    Many of the Micro-controller and Microprocessor teachers teaches the course more on the theory and book contents. The deviation in this learning part is the students are not knowing the internal bit level functioning inside the CPU and the tricks in the assembly level programming. In this place where I can able to clarify more to the students on the bit level function of different levels of processor domain classes. Interfacing sensor and actuators with controllers and memory interface area are the strong area of my teaching in which students can definitely understand and able to design any type of processor system. Memory mapping is an another area where distinct design making with more number of device will be demonstrated and make the students to practice with good design. I can help learners in practicing the microprocessor assignments and tutorial solving. ARM processor theory can be introduced to students and simple program execution can be demonstrated. The theoretical knowledge of RTOS will be demonstrated in a more understandable way to the students. Generally I teach the subjects. I can't write exams for the students. Arduino is an another easier hardware in which we can interface many sensors and take the analog signals and do some processing and send the processed signal to the input of a actuator. Practically different sensors I have interfaced to Arduino and triggered many actuator. I can help students in making projects based on Arduino boards.

    Taxhidin
    Android, Java, Electrical Circuit, Signal and System and Mathematics.
    I will teach you: Data structure and algorithm for coding Interview Test. Create Android Apps in Java and Kotlin. Mathematics and Electrical circuits. Practical with examples and applications in real life and business app. Passion and love to teach Students step by step.

    Amjad
    Math, Electronic Circuit, programing C Arduino and Phisyc
    For All engineer students and high school students .. I am an Electronics Engineer with a 3.43 GPA (THE FIRST, HONOR DEGREE ) and more than 8 years experience, while my on-the-job experience has afforded me a well-rounded skill set, including first-rate time management and problem-solving skills, I excel at: 1. Math. 2. Programming 3. electronic circuits.. 4. Simulation.

    Meryem
    Support course: Excellence in physics-chemistry
    Teacher of physics and chemistry experienced in the public sector Holder of a Master's degree specializing in physics and chemistry, I assure you a good mastery of the bass as well as a good understanding of the material, do not hesitate to contact me.