FavouritesAdd to Wish List
FavouritesAdd to Wish List
FavouritesAdd to Wish List
from15.00USD/ h

Introduction to thermodynamics covering all main branches

When studying thermodynamics we study how different types of energy and how are they transferred. This is essential for mechanical engineering students. By understanding this concept, the base fundamentals will be implemented for the thermal track in mechanical engineering. Main focus will be:
1) Properties of pure substances and thermodynamic systems
2) Energy analysis of closed systems
3) Mass and energy analysis of control volumes (open systems)
4) Second law of thermodynamics
5) Introduction to entropy
6) Simple gas power cycles
7) Basic Refrigeration cycles
8) Introduction to psychometric analysis

These topics will be covered in an easy way with extra noted and questions will be left for the end of each lecture.

Extra information

* Preferably use your laptops or tablets during the lecture
* Write notes
* Study and solve the simple assignments that will be given

Location

Online via webcam

General info

Skills:
Age:
Adults (18-64 years old)
Seniors (65+ years old)
Student level:
Intermediate
Advanced
Duration:
45 minutes
60 minutes
The class is taught in:English, Arabic

About Me

* CFD enthusiast also a passionate math and physics tutor.
* Trained in different fields of mechanical engineering
* Tutored plenty of students of different ages and conducted study groups
* Familiar with many softwares including Ansys, AutoCAD, Arduino, LABView.
* Solidworks ,Matlab and EES expert.

Education

1) American University of Beirut
* Studying: Masters of Engineering
* GPA: 3.85
* Expected year of Graduation: 2021

2) Beirut Arab University
* Studied: Mechanical Engineering
* GPA: 3.59
* year of Graduation: 2019
With high distinction i achieved fourth highest GPA over 104 Engineer

Experience / Qualifications

Private tutoring - 5 years
Research Assistant at Americ University of Beirut- 1 year
MEP trainee at Forward Company - 6 month
CAD drawing using SOLIDWORKS - 2 years

Ask a question

Send a message explaining your needs and Omar will reply soon:
The more detail, the better.
Ex. "Hi, when are you available to meet for a lesson?"

Availability of a typical week

MonTueWedThuFriSatSun
7      Wednesday at 7:00  Thursday at 7:00  Friday at 7:00  Saturday at 7:00  Sunday at 7:00
8      Wednesday at 8:00  Thursday at 8:00  Friday at 8:00  Saturday at 8:00  Sunday at 8:00
9  Monday at 9:00  Tuesday at 9:00  Wednesday at 9:00  Thursday at 9:00  Friday at 9:00  Saturday at 9:00  Sunday at 9:00
10  Monday at 10:00  Tuesday at 10:00  Wednesday at 10:00  Thursday at 10:00  Friday at 10:00  Saturday at 10:00  Sunday at 10:00
11  Monday at 11:00  Tuesday at 11:00      Friday at 11:00  Saturday at 11:00  Sunday at 11:00
12  Monday at 12:00  Tuesday at 12:00      Friday at 12:00    
13  Monday at 13:00  Tuesday at 13:00      Friday at 13:00    
14      Wednesday at 14:00  Thursday at 14:00  Friday at 14:00    
15      Wednesday at 15:00  Thursday at 15:00  Friday at 15:00    
16      Wednesday at 16:00  Thursday at 16:00  Friday at 16:00    
17  Monday at 17:00  Tuesday at 17:00  Wednesday at 17:00  Thursday at 17:00  Friday at 17:00    
18  Monday at 18:00  Tuesday at 18:00          
19  Monday at 19:00  Tuesday at 19:00          
20  Monday at 20:00  Tuesday at 20:00          
21              
22              
23              
from $15Online via webcam

Good-fit Instructor Guarantee


If you are not satisfied after your first lesson, Apprentus will find you another instructor or will refund your first lesson.

Online reputation

  • Instructor since August 2020

Availability of a typical week

MonTueWedThuFriSatSun
7      Wednesday at 7:00  Thursday at 7:00  Friday at 7:00  Saturday at 7:00  Sunday at 7:00
8      Wednesday at 8:00  Thursday at 8:00  Friday at 8:00  Saturday at 8:00  Sunday at 8:00
9  Monday at 9:00  Tuesday at 9:00  Wednesday at 9:00  Thursday at 9:00  Friday at 9:00  Saturday at 9:00  Sunday at 9:00
10  Monday at 10:00  Tuesday at 10:00  Wednesday at 10:00  Thursday at 10:00  Friday at 10:00  Saturday at 10:00  Sunday at 10:00
11  Monday at 11:00  Tuesday at 11:00      Friday at 11:00  Saturday at 11:00  Sunday at 11:00
12  Monday at 12:00  Tuesday at 12:00      Friday at 12:00    
13  Monday at 13:00  Tuesday at 13:00      Friday at 13:00    
14      Wednesday at 14:00  Thursday at 14:00  Friday at 14:00    
15      Wednesday at 15:00  Thursday at 15:00  Friday at 15:00    
16      Wednesday at 16:00  Thursday at 16:00  Friday at 16:00    
17  Monday at 17:00  Tuesday at 17:00  Wednesday at 17:00  Thursday at 17:00  Friday at 17:00    
18  Monday at 18:00  Tuesday at 18:00          
19  Monday at 19:00  Tuesday at 19:00          
20  Monday at 20:00  Tuesday at 20:00          
21              
22              
23              
from $15Online via webcam

Good-fit Instructor Guarantee


If you are not satisfied after your first lesson, Apprentus will find you another instructor or will refund your first lesson.

Share

You are here


Christophe
Mathematics, geometry, drawing, mechanics, 3D imaging and computer courses
Working part-time in the watch industry, I have been tutoring for several years in the context of refresher, one-off support or preparation of exams or competitions. Very experienced in relation to the difficulties encountered by students and pedagogue, I adapt to everyone's needs in order to quickly regain the necessary confidence, the methodology of mathematical reasoning and thus allow rapid improvement of results. Experienced and pedagogue, I adapt to the needs of the student to help him consolidate his knowledge methodically, to regain confidence and improve as quickly as possible its results. I teach these courses in a radius of 30 km around Geneva.

Ilef
STEM Subjects Support and Competitive Exams Preparation
Science and Math are subjects that cannot be learnt overnight. Their proficiency is the byproduct of years of training. Having the right supervision, mentoring and planning can help you point out weaknesses early on and save up so much time and money. This course will prep you not only for your upcoming exams, not for a class project but it will lay the foundation for many years ahead of sound thinking.

Loise
Learn how to speak, read and understand English language easily
I specialize is teaching English language to students at all stage. I have been Tutoring English language for over 3 years. Learning English with me is fun, easy and interesting. I do give rooms for questions and answers. Learning is easy when it's fun. I use interactive method of teaching to ensure that my students understands what I teach them easily. Please feel free to contact me for your English language lesson. I look forward to meeting you soon.

Thibault
Maths and Engineering - French High School / Cégep / University
My name is Thibault and I am a 3rd year mechanical engineering student at Polytechnique Montreal. I did all my secondary schooling in France where I passed my baccalaureate, before doing the preparatory year for Polytechnique Montreal and continuing to the baccalaureate. I can help with the following courses: - Middle school, high school level courses in the French system. - CEGEP or preparatory year courses: (Differential calculus, Vector algebra, Integral calculus, Probability and statistics, General chemistry) - Course of the first three years of Polytechnique Montreal in mechanical engineering. I can also help prepare for university entrance.

Gaston
Young experienced teacher of MATHEMATICS (all levels)
Currently a final year student at Polytechnique Montreal in mechanical engineering, I can give math lessons to students of all levels (from junior school to CEGEP / high school / college). The lessons are done online on the platform of your choice. Possibility to do face-to-face lessons as well as you wish. I can gladly help with exam preparation (like the BAC or other), and help with homework in mathematics. I am a pegadogue and love to help students understand and solve problems. I am used to working with children of all ages. I have been giving private lessons for 2 years and I also did tutoring in my school. Do not hesitate to contact me ! :) I am also fluent in English.

Karan
Engineering for Degree/Professional Level Engineers
A master’s graduate with First Class Honours in Advanced Mechanical Engineering from University of Leicester. Since, I completed my course in September 2019. I have worked as a Teaching Assistant in the department of engineering. I was trained and certified to teach in higher education from Leicester Learning Institute. I have assisted in demonstrating mechanical oriented first year labs concerning flow measurements in pipes, and electrical oriented labs based on circuit design and analysis using PSpice. Also, assisted in second year labs helping students to learn about material selection in electromechanical devices using CES Edupack software, as well as different engineering materials micro structural properties and processing. Furthermore, I have helped in for fourth year module involving conceptual design process for turbofan engines with improvements in aero engine design configurations. Overall, my aspects of teaching involved concepts related to designing, modelling, real life applications, mathematical calculations, physical and chemical sciences. As a tutor, I would like to give my best abilities to improvise any individuals knowledge and make sure that they succeed in each & every aspects. At the same time, my commitment to teach with supporting and delivering the learning materials with at most reliability will always be my utmost priority. I will give what it takes to make an individual completely transformed into a knowledgeable individual. I believe one becomes intelligent by not just learning the concepts, but making the best use of it by applying in the real world.

Chalan
Private Tuition in Chemistry, Engineering Studies, Maths, and Physics up to year 12, and University Mechanical Engineering up to 4th year
I am an engineering student at UNSW completing the final year of a Biomedical Engineering Masters. My undergrad is in Mechanical Engineering and I also have a Bachelors in Physics. I have taught several mechanical engineering classes at UNSW and I will be bringing that experience and know-how to my classes with you.

Reza
Tutor for Math, Physics, and Mechanical/Material Engineering courses
I have a PhD in Mechanical Engineering and currently I work as a post-doc researcher in aerospace Engineering faculty of TU Delft. I have ample experience in teaching all the courses related to Engineering such as mathematics (algebra, probability, calculus, differential equations, and advanced engineering mathematics), Mechanical engineering courses (Statics, Dynamics, Mechanics of materials, Mechanical design, control, vibration, Fluid mechanics, Thermodynamics, Heat transfer, Engineering drawing, etc), Physics (mechanics, electricity, light, waves, etc), CAD/CAM software (Autocad, Solidworks), and Mechanical design packages (ANSYS, ABAQUS, MATLAB, LS-DYNA). Not all the teachers are good at teaching Engineering and Mathematics courses and informing the students about the importance of what they are learning. That is why mathematical based engineering courses (such as Statics or Strength of Materials) are mostly boring for the students. The other problem that many students have with courses with strong mathematical background is that their mathematical basis is weak and therefore they cannot follow the course. I usually try to start my course from the basics and therefore actively engage as many students as possible in the class (even the weak ones). I also usually try to inform the students about the importance of what they are learning in the class by giving them some examples. This makes them more inspired and interested into what they are learning. If you have extra questions before starting a class, don't hesitate to ask me :)

Ivan
Math, Physics, and Test Prep Tutoring, Modeling and Simulation in Physics, Solving Equations
I specialize in modeling and simulation of the fluid dynamics, heat transfer and other engineering problems. Have 45 years of scientific and 30 years of university teaching experience, spent about 20 years as guest and affiliated professot at the Royal Institute of Technology. Full professor since 1989 in Ukraine. PhD in physics and mathematics (1981), Full Doctor in Mechanical Engineering (1991). Since secondary school I like math and physics, graduated secondary school with golden medal and also during secondary school study graduated 2-year advanced math school by Moscow Lomonosov state university.

Haider
Machine tools, elasticity theory, stability theory | Tutoring for students (Bachelor and Master)
Welcome! I have already completed my master’s degree in mechanical engineering and am currently doing my doctorate. Tutoring is offered in ✔ Machine tools ✔ Theory of elasticity ✔ Theory of stability for students (Bachelor and Master). When contacting please Class / study / training and subject notify! During the online tutoring you can see my PC desktop as I explain the subject matter to you and handwrite the tasks chapter by chapter. At the end of the tutoring, you will receive files with solutions or notes. I'm looking forward to your messages.

Abdessatar
Learn CAD, 3D design and drawing
Do you want to learn 3D design and drawing? This course is for you. You learn : - The basics of 3D design. - The basics of mechanics. - Manufacturing processes. - Mastery of a 3D design software.

Muhammad
Experienced Mechanical Engineering and Physics Online Tutor
A university teaching assistant with six years of teaching experience in teaching mechanical engineering students. I had experience in teaching various engineering courses including college physics, engineering drawing, thermodynamics, fluid mechanics, programming with C++ and Fortran languages, design of thermal systems, and more. I have an M.Sc. in mechanical engineering with my research area in the field of internal combustion engines. I can deliver the information easily and conveniently, and I focus on having the student understand the basics deeply, and then consolidate this understanding by solving problems. I establish in the student mind the systematic method of solving problems because it develops the ability to solve engineering problems - as well as problems of daily life - in a correct manner.

Hassan
Math, Calculus, physics, dynamics strengths.
Math and physics are the most important subjects for an engineer. If you have any problems with learning math or physics the problem is with the strategy that your teacher is using with you. Whenever the teacher finds the right strategy for each student the problem will be solved.

Carlos
Solidworks Design for creation of mechanical pieces or assembles
In this private classes you will learn how to use Solidworks, how to create mechanical pieces to you use them in assemblies or any mechanism. You will learn from the most basic concept like the software environment, till the medium and complex operations for design. We can use any kind of software that allows screen sharing for the classes, like Google meet, Zoom, etc. The course can be made in Spanish or English.

Eduardo
High School and College Physics Classes in English
Whether you go to an International School or to a University with English as the language of instruction, my goal is to help kids, teenagers, and adults deal with Newtonian Physics effectively. During my Mechanical Engineering Major, I worked as a Teaching Assitant for Physics I (Mechanics) and Physics II (Electricity and Magnetism). In addition, I took higher-level courses regarding mechanics, which created a very solid foundation regarding this area, as well as the capacity to convey information on these challenging subjects. With Physics it is paramount to understand what is happening, and at times we all need extra help to see why something behaves in a certain way. I will try to help you see this, and then provide you with plenty of exercises to ensure that once you take a look at your exam, you do not even have to think of what to do, you just do it.