Hybrid Power Plants: Wind and Solar PV with Energy Storaging

From 135.32 $ /h

Development of an algorithm methodology to minimize the hybrid
power produced forecast error so it’s important to keep in mind that I’m not presenting an optimization model in this work. I’ll show the dependency of the battery size used for this purpose so using the forecast error we will reduce its variability. We will see what positive
effects adding a battery within a hybrid wind and solar power plant has, its sensitivity effect, having as main advantages these:
• reduction of the curtailment produced, bigger battery size less curtailment.
• repair of the forecast error

Extra information

Bring your own laptop, Matlab can be used.

Location

Online from Spain

About Me

I'm a easy going teacher, I really like curious and hard worker students.
I like to spend as much time as necessary to provide the most complete explanation to help the student better understand.

These classes can be a perfect complement for an engineer willing to increase his/her renewable engineering formation and skills.

Education

DTU Wind Energy master by Danish Tecnical University - DTU (Denmark). Two years course.
Industrial Engineering master by Universitat Jaume I - UJI (Spain). Five years course.

Experience / Qualifications

13 years experience as renewable project engineer and many years as engineering department supervisor. RE Energy consultant expert

Age

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Intermediate

Advanced

Duration

60 minutes

The class is taught in

English

Spanish

Catalan

Skills

Engineering

Electrical engineering

Availability of a typical week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Wind turbines technology and its main components functioning

83.09 $ /h

Wind turbine technology,
different aspects that can be covered:
- electrical systems calculation.
- loads calculation.
- structural dynamics calculation.
- control system design.

Providing a complete understanding about how a wind turbine system as well as its components work.

Solar PV power plant and its main components functioning

83.09 $ /h

Solar PV technology, different aspects that can be covered:
- electrical systems calculation.
- control system design.
- monitoring, diagnosis and maintenance.

Providing a complete understanding about how a solar PV power plant as well as its components work.

4.85

(13)

I offer teaching courses in electrical engineering and electronics (private lessons or holiday courses) to deal with the difficulties encountered by students during their schooling, as part of an individual follow-up that respects the rhythm specific to each.
These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Matías

4.85

(13)

Do you aspire to master mathematics, physics and engineering at a university level? Do you want to exceed your limits and excel in these demanding fields? Do not search anymore ! Our tailor-made private lessons are there for you.

Why choose our courses?

Unparalleled Expertise: Our professors are experts in their field, with extensive experience in university teaching. They are ready to guide you towards success.

Personalized Program: We tailor each course to your specific needs, from understanding fundamental concepts to solving complex problems.

Total Flexibility: Choose the schedule that suits you best. Whether you are an active student or a professional, we adapt to your schedule.

Constant Support: You will benefit from continuous monitoring between classes to answer all your questions and concerns.

Quality Teaching Materials: We provide high-quality learning resources to support your progress.

Who can benefit from our courses?

High school students preparing for their baccalaureate or entrance exams to engineering schools.

University students pursuing a degree in mathematics, physics or engineering.

Professionals looking to acquire or deepen technical skills.

Join us today!

Excellence doesn't wait. Contact us now to book your first lesson. Together we will build a bright future based on a solid understanding of mathematics, physics and engineering.

Youssef

4.85

(13)

Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer for students of preparatory classes and technical high school support courses in the subjects of engineering sciences (Electronics, automatic, electrical engineering, automation, programming).

Digital electronics
Analog electronic
electromagnetism
Automatic
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python
PIC microcontroller
Microprocessor

These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Associate professor provides support courses in electrical engineering

Jeremy

4.85

(13)

Passionate & empathetic teacher. I have a Master's in Physics with honors from the University of Leicester (which was featured at the time as a top 5 Physics university in the UK by The Guardian) and a - french - European School diploma in which I achieved 90% in Physics and 85% in Maths.

Helping others understand difficult topics and skills is something that I am very passionate about as an empathetic person. I have 5 years of experience teaching Physics and Maths to kids from unprivileged backgrounds both in a homework schools as well as via private teaching.

In my classes, I aim to:

- help students achieve better grades in exams/tests in all branches of Physics & Maths
- clearly explain and break down topics
- give context and or example applications of topics (to improve understanding and memorization)
- help with ADHD & other learning disabilities
- give practical advice for university applications (eg. UCAS in the UK) and discuss the exciting Physics research/work and projects you can work on later in life.

Physics has a plethora of useful and fascinating applications, from the detection of Gravitational Waves and Gamma-Ray Bursts to the development of novel Medical Imaging techniques and Nano-technology (eg: smartphones). It is a subject that I am very passionate about and I hope to make use of my years of experience and extensive knowledge to help you understand and love the subject! My lessons will always be tailored to the individual needs of the student, so please do not hesitate to contact me if you have questions!

Nicolas

4.85

(13)

As a current Master's student in Aerospace Engineering at TU Delft, I have successfully navigated the entire Bachelor's curriculum and the competitive selection procedure, so I am fully equipped to guide you through the study plan and specific admission requirements. I offer personalized tutoring sessions designed to ensure comprehensive preparation for the entrance exams. These classes include a detailed review of key concepts in Mathematics and Physics, intensive practice with relevant exercises, and specific strategies to tackle the test effectively. I also place a dedicated focus on mastering the First Year Material (FYM) section (often the most challenging and unfamiliar part for applicants) to help you build the confidence and skills necessary to succeed. Furthermore, I am happy to discuss the degree program itself and explore the opportunities available in Delft to help you prepare for your future student life.

Marcos

4.85

(13)

80% of my students got accepted in the 2025 exam, I am sure I can help you out in the 2026 exam!

TU Delft is Europe's most prestigious university for aerospace studies, preparing some of the best engineers. However the selection procedure is tough and demanding, and only those prepared have a chance to succeed.

As a TU Delft student, I know from first hand how stressfull this process is, and can therefore help you succeed in the preparation of these exams. I have previous experience as a tutor back in high school, helping students improve their grades from Cs to As.

Moreover, I have an extensive knowledge on the subjects tested on these exams, having taken them myself, completed the courses at university with excellent grades and teaching over 10 students for the entrance exam.

Throughout the class, I will use a presentation to explain the main concepts of each exam (Maths, Physics and Aerospace Engineering), focusing on those subjects the student is struggling with most. After this, I will help the student complete some practice excercises, and then assign extra practice to complete on their own time. These exercises will then be reviewed in the following class to ensure the topics have been understood.

I am looking forward to help you in your journey as an aerospace engineer!

Ali

4.85

(13)

I offer one-to-one Electronics and Electrical Engineering tuition for university students, college students, and serious learners. Lessons are available online or in person around Birmingham.

What I cover:

Circuit analysis (DC and AC, Kirchhoff's laws, Thevenin / Norton, op-amps)
Digital electronics and logic design
Signals and Systems, Digital Signal Processing (DSP)
Control systems (Laplace, transfer functions, stability, frequency response)
Embedded systems and microcontroller basics
Power electronics fundamentals
University coursework, lab reports, dissertation and project support
Exam preparation for engineering modules

How I teach:
I start by figuring out exactly which concepts are tripping you up — most students are stuck on one or two key ideas, and once those click, everything else falls into place. I use plenty of worked examples, real circuit diagrams, and clear explanations of the maths behind each topic. For project and dissertation work, I can help you plan, debug, and present your work properly.
If you're struggling with an engineering module, preparing for exams, or working on a final-year project, I can help you turn confusion into confidence.

Ahmed

4.85

(13)

Fundamentals of electronics engineering, Arduino programming, and smart home circuits

I offer practical and simplified training that starts from the basics of electronics and goes up to the design and programming of smart home and Internet of Things systems, with theoretical explanations and practical applications on real circuits and digital simulations.

Course content:
1. Fundamentals of Electronics

Identifying different electronic components: resistors, capacitors, diodes, transistors, and sensors.

Understanding correct electrical connections

Reading electronic circuits and working with breadboards

2. What is Arduino? And how do we program it?

Introduction to Arduino boards

Explanation of the C++ programming language used with Arduino

How to download code and test projects step by step

3. Design and programming of smart home circuits

Connecting sensors and smart switches

Lighting and electrical appliance control

Designing a system that controls the home using a mobile phone

Introduction to the Internet of Things (IoT) and its connection to home control

4. Controlling the home from a mobile phone

Creating simple control interfaces

Connect using Wi-Fi or Bluetooth

Remote device operation and sensor monitoring

5. Practical training

Real Arduino circuit experiment

Using simulation software such as Tinkercad and Proteus

Practical projects ready for implementation

Who is this course for?

Beginners in the field of electronics

Students interested in Arduino programming

Who wants to create a smart home project?

Anyone who wants to understand how electronics work in a simple and practical way

Mohamed

4.85

(13)

Learn calculus from an instructor with proven experience tutoring advanced calculus at the college level. This course combines rigorous academic standards with clear, student-centered explanations to help learners truly understand challenging concepts.

With experience guiding university students through advanced topics, the instruction is practical, thorough, and focused on long-term mastery—ideal for students pursuing mathematics, engineering, or science.

Stephen

4.85

(13)

I am an experienced ESL instructor with over 10 years of proven results working with learners across all levels, from beginners to advanced professionals. I specialize in assessment preparation, including standardized exams, and have a strong track record of helping students achieve measurable score improvements. My technical background allows me to deliver clear, structured instruction, particularly suited to analytical and goal-oriented learners. I focus on efficient, results-driven lessons tailored to each student’s academic, professional, or certification goals.

Simone

4.85

(13)

I have a bachelor in Aerospace Engineering and actually finishing my master in Space Engineering in Luxembourg. I worked as a teacher in aeronautical high school where I was teaching mechanics and technical drawing. At the same time was giving private lessons on math, physics.
I am very passionate about teaching indeed still during my studies I am use to give lessons and tutoring.
Other subjects could be Italian, Aerodynamics and Structure, Algebra and Geometry from Beginner level to University level.

Mohtady

4.85

(13)

This lesson is aimed at engineering students and those interested in the field of mechatronics and practical applications, where basic and advanced concepts are presented in a simplified and smooth style that combines theoretical understanding and practical application.

The lesson will focus on explaining the ideas in a gradual way, starting from the basics and progressing to solving problems and real-world applications, using practical examples, practice exercises, and models from real projects to increase understanding and consolidate information.

Attention is also given to simplifying complex concepts, clarifying common mistakes, and providing effective methods for quick solutions, which helps the student achieve the best performance in both academic and practical application.

This lesson is suitable for beginners as well as those who have a background and wish to strengthen their skills and reach a professional level.

Farid

4.85

(13)

I am a Master’s student in Telecommunications Engineering at the University of Bologna, with a current GPA of 29.54/30 and a previous academic background in Control Engineering.

I offer lessons in English for university and engineering students who need help with mathematics, physics, signals and systems, control systems, and telecommunications. My lessons are structured and practical: first we identify the student’s difficulties, then we review the theory clearly, and finally we solve exercises step by step.

I can help with exam preparation, assignments, lecture review, MATLAB practice, and understanding difficult technical concepts. The goal is not only to solve one exercise, but to help the student build a clear method for solving similar problems independently.

Mohammad

4.85

(13)

PhD physicist and nuclear engineer with over 10 years of research experience at CERN and CNRS, offering tailored private lessons in physics and applied mathematics for university students and motivated high school students preparing for higher education.
I specialise in helping students build genuine understanding of the principles behind complex problems, not just memorise formulas for exams. My teaching adapts to your level, your pace, and your specific goals.
Topics I can cover include classical mechanics, thermodynamics, fluid mechanics, electromagnetism, quantum physics, nuclear physics, radiation physics, applied mathematics, differential equations, linear algebra, probability and statistics, and numerical methods.
I have a PhD in nuclear engineering from Université Grenoble Alpes, an MSc in nuclear plant design from Université Paris-Saclay, and a BSc in nuclear engineering. I have worked as a research fellow at CERN and as a doctoral researcher at CNRS, and I have supervised students and interns throughout my career.
Lessons are available online via video call or in person in Geneva. I am flexible on scheduling and happy to discuss your specific needs before we start.

Juan

4.85

(13)

I work with you as a Spanish-speaking international student to help you clearly and directly understand subjects such as engineering mathematics, physics, electronics across all areas (analogue, digital, power systems and circuits), signals and systems, and applied programming using tools like Python, MATLAB, or Arduino. The goal is for you to stop seeing these topics as abstract concepts in English and start truly understanding them in your own language, connecting theory with what is required at university. Each session is adapted to what you are covering in class, whether it is exam preparation, assignment support, or strengthening fundamentals, with simple, practical explanations focused on helping you progress with confidence.