HanStatistic, programing and data analysis lecture by French Master.
Graduated with a Master in applied mathematics and optimization, I am offering lecture to supports you in your university classes/projects/exams in statistics, programing (including mathematical programing) and data analysis.
I am currently working in the private sector, which imply c++ programing, scripting and mathematical modeling (constraint programing, linear programing/MIP, Branch and Bound etc...).
I can help you from the installation of the software you need to get your project starting to a recurring help in your project (school or professional).
Small remark for statistical classes:
This classes requiring more preparation, I always refuse request for which the due date (examen/ end of project) is in less than four weeks.
C/C++, Java, VBA etc...
Matlab, R, (Excel)
Class can be given in French or English.
SamPRIVATE LESSONS ELECTRONICS MATHEMATICS PHYSICAL (lessons, exercises, corrected exams)
Professor in mathematics, computer science at HEFF in Brussels and before a professor of electronics at IEPSCF, NGÉNIEUR in electronics ECAMIEN of basic diploma in mathematics-physics and I propose an individualized pedagogy, an aid to the preparation of the interrogations or exams. My goal is to advance the student without overloading him. I give homework after each lesson and periodically provide progress reports
I strongly encourage the student because the state of mind and morale have a direct influence on school results.
I am someone understandable and I always try to take each one in his own way.
I always start by clarifying the course after giving an example then give an example to the student to do a full exercise and finally correct a review together generally it's methodology but it can change from one case to another.
DragosArchiCAD design software for anyone - fast and correct workflow
ArchiCAD is one of the most versatile software you can use to put your architectural ideas into drawings. Used by students and businesses around the world it can be a great way to start CAD design learning or complex BIM projects.
I am an architecture grad with notable results in European and national level architecture competitions. Have been using Archicad for 4 years now. I'll be more than happy to guide your first steps into the world of CAD by teaching a correct workflow. With my help you will be drafting fast and accurate, maintaining a fully editable model from start to finish.
Can't wait to new architecture and design students bringing better design into the world :)
MartinBlender 2.9x, 3D modeling by a LinkedIn trainer & Twitch streamer
Whether you are a beginner, a designer or just curious to learn, go for it. Being self-taught is great to start with, but I learned that you also develop bad habits very easily.
As a trainer on the Linkedin Learning platform, I will give you access to the training of the essentials of Blender 2.8 and we can thus devote ourselves to perfecting your skills during private lessons.
My methodology is simple, it wants to be accessible and adapted to the learner, that's the whole point of a private course.
Let's explore Blender 2.9x together through an introductory or advanced course.
FawziInternational freelance trainer offers training on CATIA V5 and Solidworks
Experienced trainer specializing in CAD software (Computer Aided Design) offers its services to professionals and individuals, in terms of training and homework help / technical support on CATIA V5 and / or Solidworks.
the content of CATIA V5 or Solidworks basic training (24 hours = 3h x 8 sessions) is as follows:
- Introduction to CAD, presentation of the user environment
- Creating geometries from sketches
- 3D modeling of prismatic parts
- Creating parts using advanced tools
- Realization of assemblies
- Development of drawings from parts and assemblies
if you already have basic knowledge and want to improve it, I offer intermediate (15 h) or advanced (9 h)
if you prefer more specific and shorter courses, I also offer other courses:
advanced mechanical design, advanced assemblies, surface, sheet metal, kinematics, mold making, Knowledgeware ...
you can also opt for a la carte training.
I specify that I prepare myself course materials / exercise books and assessments.
Houssem EddineA Math teacher gives courses in Maths, Algebra, Geometry and Electricity.
An experienced teacher at your disposal for:
- Methodology adapted to all levels.
- Consolidation of achievements.
- Preparation for an examination / competition (CEB, CE1D, CESS.etc).
- Help with homework and lessons.
- Complementary exercises and review as controls and exams approach.
- Advice and supervision at the level of working methods.
- Recommended teaching methods.
Currently, I am doing my maths aggregation. I am already an electromechanical engineer, graduated as a senior technician in electronics and electrical engineering and who passed my bachelor's degree in mathematics with honors. I teach in different technical fields and especially mathematics, algebra and electronics.
At the level of my teaching methods, I use those that are advised pedagogically, I always try to explain and detail as much as possible the courses and I do not pass to the following stages until after making sure that the student understood what I explained.
As a teacher, I already have a good teaching experience with students since 4 years. What is certain, I make sure to always go as far as possible to explain the exercises.
MahmoodC and C++ Programming Language Course and tuition classes
In this classes I will teach you all the basics about C/C++ programming language.
At the end of this class you will get a good understanding about the concept of object-oriented programming using C/C++, and you will be able to write and read basic C/C++ code.
No prior knowledge is required.
- Types and declarations
- Pointers, Arrays and Structures
- Expressions and statements
- Namespaces and Exceptions
- Source Files and Programs
- Operator Overloading
- Derived class
MartinaLessons of AutoCAD for Architect and Interior Design
I’m Martina an Italian architect and interior design. I’d like to introduce you in the CAD world. I start to use this software more then ten years ago and I’m sure in few lessons I can give you the base of this program. If you need something more about this software then just ask me.
RafikLearn C and Java Programming and Computer Networks
I am a PhD student in Computer Science specializing in Cloud Computing. I have three year experience in tutoring C and Java during my bachelor/masters studies.
Actually I'm working as I'm an IT Manager at a recrutement firm.
The class is open even for people with no experience in programming.
AbdeComputer programming course in Python / C ++ / Java
PhD student in computer science at ULB with experience with many computer projects gives programming courses for computer science or high school students who have difficulty with programming or computer logic as well as any kind of computer theory (discrete mathematics, algorithmic complexity, etc.).
I also do fun programming initiations with Python, Scratch or Sonic Pi (software for programming sound).
I teach these languages:
- C / C ++
Understanding student issues is a priority for me. There was no class that did not receive a negative response. Do not hesitate to contact!
MatíasLearn to create CAD parts and parametric dessign with FreeCAD
CAD allows creating pieces or parts and put them together to conceive machines, ships, buildings and anything imaginable. Creating a 3D model is the first step to 3D printing, CNC machining and fabrication in general. Also it is necessary to do simulations or calculations using a myriad of techniques.
FreeCAD is a free and open source software that follows the parametric design paradigm. That conception in design is the same in many other CAD software, like, for example, CATIA, Roadworks, Solid Edge, Inventor and Fusion360, just to mention some of them. This means that once we have acquire a good basis in creating pieces and assemblies in FreeCAD, adapt to any other of the former mentioned would take a bunch of hours.
Dircktutoring on science subjects from middle school to high school
Academic support courses to successfully pass the exams. I can provide you with methods to maximize your chances of success.
I have an engineering degree that will allow me to help you succeed in science, electronics, industry or in project management
PierrickSKETCHUP: Initiation to drawing in 3D easy to realize for all your projects!
Want to learn 3D drawing?
Sketchup is Google's free 3D modeling software.
Simple and accessible software, I will teach you how to model your project and give life to all your ideas ;-) This software is used and recognized in many areas: design, architecture, decoration, events, ... You will be able to model your project, manage views, and apply a first rendering of topics. You are a student? I can advise you for your interior design or decoration projects.
Feel free to contact me for more information.
MehdiElectronics, Mathematics, Physics, chemistry For all level
I specialize in tutoring physics for bac level and preparatory class. Also mathematics and electronics for all level. My goal is to make sure to follow the student rythme, if they look for grades will get grades if they look for knowledge will get the necessary background.