Electronics engineering for graduate students tutoring

من 1333.58 EGP /س

Iam a Doctorate and specialize in tutoring engineering students. My goal is to keep students challenged, but not overwhelmed. I assign homework after every lesson and provide periodic progress reports. I assure better learning and understanding of concepts.

المكان

عبر الانترنت من الهند

السن

شباب (13-17 سنة)

الكبار (18-64 سنة)

الكبار (65 سنة فأكثر)

مستوى الطالب

مبتدئ

متوسط

متقدم

المدة

60 دقيقة

الدرس يدور باللغة

الإنجليزية

مهارات

هندسة الكمبيوتر

الهندسة الكهربائية

الجاهزية في الأسبوع العادي

(GMT -05:00)

نيويورك

على الانترنت عبر كاميرا ويب

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Ahmed

5.0

(6)

Professeur agrégé en Sciences Industrielles de l’Ingénieur et Ingénierie Electrique, et Ingénieur d'état en génie électrique. Disponible pour des cours de soutiens, préparation aux examens d'électronique.... : IUT, BTS, EST, CPGE, UNIVERSITE, CYCLE D'INGENIEUR.

Je propose des cours en électronique, électrotechnique, automatique et électricité pour CPGE TSI, EST et BTS et des Ecoles d'ingénieurs.

Je dispose de tout les outils technologiques nécessaires pour donner des cours à distance et donc dispenser le cours dans d'excellentes conditions.

Méthode de travail :

Je fonctionne selon vos attentes puis je vous proposerez des cours plus ciblées pour combler vos lacunes.

1- Nous commençons par un rappel de cours en mettant l'accent sur les points clés.
2- Nous travaillons ensemble des exercices en lien direct avec le cours de la classe.
3- Nous abordons des exercices plus approfondis pour traiter les différents cas.

+ Electronique de puissance :
- Convertisseur statique DC/AC : Onduleur
- Convertisseur statique AC/DC : Redresseur
- Convertisseur statique DC/DC : Hacheur
- Convertisseur statique AC/AC : Gradateur

+ Electrotechnique:
- Machine à courant continu
- Variation de vitesse de la machine à courant continu
- Machine asynchrone.
- Variation de vitesse de la machine asynchrone
- Machine synchrone - Alternateur
- Transformateurs
- Régime monophasé et régime triphasé
- Energies renouvelables (solaire & éolienne)

+ Automatique :
- Automate programmable (Schneider et Siemens)
- Régulation industrielle
- Asservissement
- Microcontrôleurs

+ Electronique :
- Capteurs et détecteurs
- Amplificateurs opérationnels ALI
- Filtres analogiques : Filtrage
- Convertisseurs Analogique/Numérique CAN et CNA
- Systèmes logique combinatoires et séquentielles
- Modulation analogique (AM, FM, PM) et Modulation numérique (ASK, FSK, PSK, QAM)

+ Projets :
- Réalisation des projets à base d'arduino
- Simulations sur Proteus ISIS
- Réalisation des projets à base ESP8266 nodmcu ESP32

Monther

5.0

(6)

Teaching electrical and electronic engineering subjects through examples and practical explanations
Examples of subjects that I can teach in Arabic and English:
Microcontroller - Arduino - Embedded System - Electrical Machine - Power Electronics - Digital System Design - Digital Circuit - Programming in C
And some other core subjects for electrical and electronic engineering major

I am able to teach the Electrical and Electronics Engineering Subject with practical examples, some courses that I can teach:
Microcontroller - Embedded System - Electrical Machine - Power Electronics - Digital System Design - Digital Circuit - Programming in C.

Dr.

5.0

(6)

This course provides an overview of the concepts and fundamentals of computer networks.

Topics include an overview of network architectures and topologies, IP addressing and subnetting, congestion mechanism CSMA/CD, troubleshooting commands and methods, switching and routing devices and their related decisions, TCP/IP layers and their protocols (FTP, HTTP, SMTP, DNS, DHCP, UDP, TCP, IP, ICMP etc...), security measures and how to secure your network using Access Lists and Firewall.

The Networking course is a course where you actively learn by doing. You will learn network concepts and protocols by configuring a network, observing the actual behavior of its components and analyzing the results.

Topics include: Basic computer network components, network cabling and cable types, IP addressing and TCP/IP configuration, Peer to Peer and switch-based network, email, HTTP, DHCP and DNS servers, Intrusion attack and firewall configuration.

Abdelali

5.0

(6)

Hello, I am an electrical and electronic engineer with extensive experience as a professor in higher education in engineering sciences and electrical engineering, as well as a rich experience as an embedded systems engineer, in EE architecture, ADAS, Testing and validation in the automotive sector.

I propose for the students of the higher cycle a supervision and an accompaniment until the realization of their projects or mini projects in electronics, signal processing, regulation and enslavement... using languages and software such as: Matlab / Simulink, Python, LabVIEW, ISIS Proteus, Arduino...

I also give courses and training in:

Embedded systems, ADAS systems and automotive engineering
Electrical and electronic circuits
Automatic
Industrial regulation
Signal processing
C Programming, Assembler, PIC, Arduino
PIC microcontroller
Microprocessor

Mehdi

5.0

(6)

This is an advanced course: learn how to develop web applications from zero to hero. A simple application development which will take around 10 hours of course depending on your level in programming.

- front end: reactjs
- back end: c# with dotnet or python with django rest framework
- database: mongodb, mysql or postgres
- publishing using AWS.
- using git/github for versioning

prerequisite:
- sql database data manipulation
- algorithms and programming

In this course, you will learn how to make a modern web application. You will be able to develop your skills for creating a database, and to connect it to the web application. Publishing the solution will not scare and you will be able to see how you can put your website online. You will create your own domain so that everyone can access your website. You will be able to use github and git in order to keep track of your application maintenance and development. Testing your application for better quality.

*text me to learn more about the course

Yassine

5.0

(6)

Are you looking to improve your skills in mathematics, physics or technical skills? I offer courses adapted to your level, whether you are in middle school, high school or even in higher education.

We will cover key concepts in a clear and structured manner to help you master the fundamentals, solve complex exercises and prepare for exams. Whether for support courses or to deepen your knowledge, I am here to guide you.

Ahmed

5.0

(6)

Fundamentals of electronics engineering, Arduino programming, and smart home circuits

I offer practical and simplified training that starts from the basics of electronics and goes up to the design and programming of smart home and Internet of Things systems, with theoretical explanations and practical applications on real circuits and digital simulations.

Course content:
1. Fundamentals of Electronics

Identifying different electronic components: resistors, capacitors, diodes, transistors, and sensors.

Understanding correct electrical connections

Reading electronic circuits and working with breadboards

2. What is Arduino? And how do we program it?

Introduction to Arduino boards

Explanation of the C++ programming language used with Arduino

How to download code and test projects step by step

3. Design and programming of smart home circuits

Connecting sensors and smart switches

Lighting and electrical appliance control

Designing a system that controls the home using a mobile phone

Introduction to the Internet of Things (IoT) and its connection to home control

4. Controlling the home from a mobile phone

Creating simple control interfaces

Connect using Wi-Fi or Bluetooth

Remote device operation and sensor monitoring

5. Practical training

Real Arduino circuit experiment

Using simulation software such as Tinkercad and Proteus

Practical projects ready for implementation

Who is this course for?

Beginners in the field of electronics

Students interested in Arduino programming

Who wants to create a smart home project?

Anyone who wants to understand how electronics work in a simple and practical way

Fatima

5.0

(6)

🚀 Do you finally want to understand electricity, electronics, or automation without stress? You've come to the right place!

👩‍🏫 I'm an electrical and renewable energy engineer and an experienced teacher. I'll guide you step by step, even if you're starting from scratch.

💡 My courses allow you to:
Understanding the basics of electricity

Master electronic circuits, control systems, and automatons

Learn at your own pace with concrete examples, diagrams, simulations and guided exercises

🧰 Content suitable for:
High school students / students in BTS, DUT, license, preparatory classes, engineering schools......

Students in retraining or self-taught

International students (courses available in French or English)

✅ What sets me apart:
Clear, progressive and caring approach

Support after the course if needed (questions, corrections, etc.)

Online or face-to-face courses

Ahmed

5.0

(6)

This course is intended for preparatory year university students and all majors that rely on the study of differential and integral calculus (Calculus 1 & 2), such as: engineering in all its branches, natural sciences, computer science, economics, and management, in addition to any field that requires a strong foundation in mathematics.

In this course, we will go through a step-by-step explanation of the concepts of differentiation and integration, starting with limits, derivatives, and their rules, then moving on to practical applications of differentiation, such as maximum rates of change and solving physical and engineering problems. Finally, we will discuss definite and indefinite integration and its various methods of calculation, with practical applications for areas, volumes, and solving equations.

The lessons are designed in a simple and streamlined style that helps students understand complex concepts easily, with a focus on practical training through solving exercises and questions similar to those found on university exams. Detailed explanations of common mistakes and practical tips are also provided for confidently passing Calculus and achieving outstanding results.

This course is not limited to simply solving problems, but rather aims to build a solid mathematical foundation that will enable the student to pursue his other university courses more easily.

Rachid

5.0

(6)

En tant que professeur et ingénieur spécialisé en génie électrique, j'adopte une approche personnalisée et interactive de l'enseignement. Mon approche se caractérise par les éléments suivants :
🟦 Création d'un environnement d'apprentissage favorable, où vous vous sentez à l'aise pour poser des questions et explorer en profondeur les concepts électriques.
🟦 Partage de savoir au moyen d'exemples concrets et de démonstrations pratiques.
🟦 Objectif visant à favoriser une compréhension approfondie chez vous, tout en vous préparant efficacement aux examens et vous aidant à faire vos devoirs et vos projets.

Domaines de Compétences & Matières Enseignées

Je propose des cours approfondis couvrant les principaux piliers du génie électrique :

🟠 Électrotechnique : Machines électriques, transformateurs (monophasés et triphasés), énergies renouvelables (solaire et éolien).

🟠Électronique de Puissance : Convertisseurs statiques (Redresseurs, Hacheurs, Onduleurs, Gradateurs).

🟠Automatique et Asservissement.

🟠Automatisme et systèmes embarqués.

🟠Électronique Analogique & Numérique : Logique, filtres, amplificateurs, etc.

🟠Capteurs et Détecteurs.

🟠Télécommunications : Modulation analogique (AM, FM) et numérique (ASK, FSK, PSK).

🟠Traitement du signal

🟠Aide aux Projets & Maîtrise Logicielle:
Je vous accompagne activement dans la réalisation de vos projets, notamment : conception et programmation sur microcontrôleurs (Arduino, ESP32, etc.).
Simulation et modélisation sous Proteus ISIS et MATLAB/SIMULINK.

Mohamed

5.0

(6)

Mathematics can be challenging—but with the right guidance, any student can excel.
I am a University Lecturer Assistant in Mathematics, an Engineer, and currently pursuing my PhD, with more than 7 years of teaching experience (including 4 years online) for school and university levels.

I have taught students from a wide range of backgrounds, including IGCSE, American curriculum, university undergraduate programs from different faculties. My lessons are tailored to each student’s pace, goals, and learning style to ensure real understanding, not memorization.

What you will learn in this class:

1- Clear understanding of mathematical concepts
2- Step-by-step problem-solving strategies
3- How to approach exams with confidence
4- Techniques to improve speed and accuracy
5- Application of math in engineering and real-life contexts

Subjects I teach:
1- Algebra, Geometry, Pre-Calculus
2- Calculus I, II, III
3- Linear Algebra, Differential Equations
4- Probability & Statistics
5- IGCSE & American Math Curriculum (Secondary levels)
6- Numerical Analysis

Why choose this class?
1- Taught by a university-level lecturer and researcher
2- 1-to-1 tailored explanations for your level
3- Easy-to-follow teaching style that builds confidence
4- Perfect for struggling students or high achievers aiming for top grades
5- Flexible teaching pace to suit beginners, intermediate, and advanced learners

Whether you are preparing for an exam, need help understanding your coursework, or want to strengthen your math foundation, I will guide you step-by-step until you master the material.

Omayma

5.0

(6)

Personalized support for students, freelancers and entrepreneurs wishing to succeed in their IT projects.

Help with:

Project structuring

Technology choices

Specifications

Code correction and improvement

University projects (final year projects, final year projects, dissertations)

Finalization and delivery of the project

Youssef

5.0

(6)

This computer science support course is designed for students and learners wishing to strengthen their foundations or improve their level in computer science and programming.
I support participants in a pedagogical and progressive manner, adapting to their level and objectives (university courses, training, practical work, exams, projects).
The goal is to understand, practice and gain autonomy through clear explanations and concrete examples.

Ahmed

5.0

(6)

I am a dedicated Physics teacher with a strong passion for explaining scientific concepts in a clear, practical, and engaging way. I focus on building students’ conceptual understanding, problem-solving skills, and scientific thinking. My teaching approach combines theory with real-life applications, experiments, and visual explanations to make physics easy to understand and enjoyable for students at different academic levels.

Mohammed

5.0

(6)

Comprehensive explanations of all chapters of Fluid Mechanics for all colleges and institutes in Kuwait, scholarship students, and others, including summaries, explanations, solved examples, and past exams, linking theory with practice. Also included are explanatory videos for all chapters: Fluid Mechanics 1, Fluid Mechanics 2, Hydraulics, and Turbomechanics.