1) Aircraft Propulsion and Gas Turbine Engine Theory

Àpd 31.65 C$ /h

The class could be organized based on the student background, it may cover a combination of the following courses:
1-Gas Turbine Engine Theory
2-Aero-Engine Propulsion
3-Turbomachinery
4-Gas Dynamics (compressible flow)
5-Fluid Mechanics (incompressible flow)

Informations supplémentaires

Should be studied thermodynamics and fluid mechanics

Lieu

En ligne depuis Autriche

Présentation

I always use the interactive techniques in my classes, follow on support, and mind mapping for different matter of issues in any non understood point.
Based on my previous experience as a professional and academic.

Education

1-PhD candidate of Mechanical Power Engineering-Zagazig University
2- MSc. Of Mechanical Power Engineering-Zagazig University
3- BSc. Of Aerospace Engineering-Military Technical College

Expérience / Qualifications

MSc. Thesis(Modeling and Simulation of Double Spool TurboFan Engine Using SIMULINK)
PhD thesis (Axial Flow Compressor Deterioration Due to Water Ingestion in Jet Engines)

Age

Adultes (18-64 ans)

Niveau du Cours

Intermédiaire

Avancé

Durée

60 minutes

Enseigné en

anglais

Compétences

Génie mécanique

Disponibilité semaine type

(GMT -05:00)

New York

Cours par webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Abdessatar

5.0

(2)

Do you want to learn 3D design and drawing?
This course is for you. You learn :
- The basics of 3D design.
- The basics of mechanics.
- Manufacturing processes.
- Mastery of a 3D design software.

Yassine

5.0

(2)

Associate Professor and Doctor of Mechanical Engineering – Recognized academic expertise, combining scientific rigor and pedagogical excellence.

Private tutor for 10 years – A decade of experience in personalized support and student success.

I do not charge for extra time – My commitment is total: the time needed to understand and master the concepts is included.

Passionate and patient teaching – I teach with kindness, adapting to each individual's pace to transmit knowledge and methods in a lasting way.

Project and internship support – Structured guidance to enhance your work and strengthen your academic and professional record.

Sliding scale pricing based on the number of hours – A fair formula that rewards long-term investment.

I offer private online tutoring adapted to all levels of higher education:

🟥 Engineering Cycle • 🟥 Master's Degree • 🟥 Bachelor's Degree • 🟥 Preparatory Classes for the Grandes Écoles
🟥 Integrated preparatory courses • 🟥 DUT • 🟥 BTS • 🟥 Post-bac.
Which aim to:
🟡 Achieve excellent grades with guaranteed results thanks to a proven method.
🟡 Reinforcing fundamental concepts and acquiring practical tips.
🟡 Complete preparation for tutorials, homework, tests, exams and national competitions.
🟡 Specialized support for academic and industrial projects

🟢 Working method: an effective 3-step method
course review and summary
• drafting a complete summary sheet
· focus on important elements, key formulas and tips
• Fast and efficient revision support
progressive training
• Typical exercises and direct application
• problems of in-depth study
· complex synthesis exercises
optimal preparation
• Specific methods for each type of assessment
• Strategies for tests, exams and competitions
• simulations of tests under real-world conditions

I use remote platforms such as:
Zoom, Teams, Google Meet...
I use a graphics tablet as a tool.

Among the courses I teach:
🟢 Solid mechanics;
🟢 The mechanics of the point;
🟢 Strength of materials (SOM);
🟢 Continuum mechanics (CM);
🟢 Elasticity;
🟢 Structural calculations using finite element (FE);
🟢 Reinforced concrete structural calculations;
🟢 The vibration continues;
🟢 Fluid mechanics;
🟢 Hydraulics;
🟢 Thermodynamics;
🟢 Heat transfer;
🟢 Industrial design;
🟢 Aeronautics;
🟢 Machine components;
🟢 The materials;
🟢 Metallurgy;
🟢 Mechanical manufacturing processes;
🟢 Metrology;
🟢 Servomechanisms and regulation.

I offer continuing education courses or industrial projects to be carried out using modeling and numerical simulation software, CAM and CAD:
🟢 Ansys;
🟢 Abaqus;
🟢 Catia;
🟢 SolidWorks

Mohamed

5.0

(2)

CATIA V5 est un logiciel performant dans le monde de la conception mécanique, avec lequel on peut concevoir les pièces quelconques. Je vais vous aider à comment concevoir des pièces, de faire leur dessin de définition, leur assemblage, et aussi la simulation.
En tant que concepteur vous devez savoir comment utiliser cet outil, afin de valoriser votre profil.

Youssef

5.0

(2)

===================Satisfied or refunded=======================
Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (Electronics, automatics, electrical engineering, automation, programming).
Computational Sciences and Technology SNT
IS engineering sciences
Numerical and computer science SNI
Digital electronics
Analog electronic
electromagnetism
Signal processing and data acquisition
Automatic (discrete, continuous)
electrical engineering (transformers, electrical machines, switching power supply)
C/C++ Programming, Assembler, ARM, STM32
renewable energy (wind, PV-solar)
RDM - strength of materials mechanics of solids
Python and SYSML
PIC microcontroller
Microprocessor
MATLAB, proteus
Preparation for competitions
Supervision of graduation projects
CAPLP Electrotechnical and Electronic Electrical Engineering
CAPLP and BTS subjects and answers
Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020
CORRECTION OF BTS TESTS

Tim

5.0

(2)

Need help with mechanics, physics, or thermodynamics? As a 33-year-old civil engineer, I'm happy to help! I'll learn at your own pace, using plenty of examples to illustrate the material. I have years of experience teaching both simple and complex subjects.

The lessons run as follows. First, we look together for the student's biggest stumbling blocks. These can be related to the subject matter as well as to the study method. From there, I work at the pace of the student and encourage them to ask as many questions as possible. I also give tips and tricks, and improve their working methods where necessary. During the lesson I give many examples to make the subject matter more interesting and we solve exercises together. Once practiced from the lesson, I mastered challenging exercises to also test the deeper understanding of the subject matter. In this way I try to optimally prepare the student for his/her exam test.

However, learning should also be enjoyable. That is why I always strive for a bond with the student through a spontaneous and positive approach. I am also very patient. All this to solve and improve the problems.

Are you interested? Don't hesitate to receive me!
Please come!

Tim

Abdeer

5.0

(2)

Doctor and graduate in mechanical engineering, I give private lessons at the following level:
* Kinematic Model Course (direct or inverse)
* Dynamic Model Course (direct or reverse)
* Static Model Course (direct or inverse)
* Course Planning the trajectory
* Robot Control Course
* Programming course on Matlab or RoboStudio.

Oualid

5.0

(2)

I give private lessons in Mathematics - Analysis - Matrices - Statistics - Algebra - Geometry - Physics - Chemistry - thermodynamics-fluid mechanics-RDM to students in French or Arabic programs.
Homework help for Baccalaureate students.
preparation for the competition.
For more information, do not hesitate to contact me, guaranteed response in a few minutes up to 6 hours maximum.

Francisco

5.0

(2)

With 7+ years' experience in education, I have coached over 50 students to improve their academic results and boost their confidence in math and physics.

My tutoring services always include a personalized plan for each student. This plan is established during the first session where I like to meet the student, better understand their difficulties and get to know their schedule.

In the first session, we will:

- Get to know each other.
- Understand the student's strengths and identify areas for improvement.
- Understand the student's needs and difficulties.
- Get to know the student's schedule.
- Create a tutoring plan

Typically, sessions take place as follows:
i. Theoretical review of complex concepts in simple terms
ii. Tips for solving problems
iii. Abundance of exercises from my databases (exams, exercises)

If you are interested in my services, please provide the following information when contacting me:

- School system (French Bac, Matu, IB, A-levels)
- Location of tutoring (or video tutoring if applicable)
- Number of sessions per week and preferred days and times of the week (this can also be discussed after the first session, if you prefer)

Check out my profile if you want to know more about me :)

See you soon,
Francisco

Mohamed

5.0

(2)

Hi,
I offer courses in mathematics, physics, as well as mechanical engineering courses for all levels (high school and university). As an engineer with a doctorate in mechanical engineering, I have a solid experience in teaching and I am passionate about supporting pupils and students towards success.

Whether you are looking for academic support, exam preparation, or to deepen your knowledge in these subjects, I am here to help you with teaching methods adapted to your needs.

Feel free to contact me for more information !

Yassmine

5.0

(2)

As a mechanical engineer, I offer tutoring in mathematics, physics and mechanical engineering, adapting each session to the specific needs of the student. My goal is to make these subjects clear and accessible while promoting understanding and practical application of concepts.

Adrian

5.0

(2)

Mathematics: Depending on your level and needs, we can review the fundamentals (calculations, fractions, equations), and delve deeper into more advanced concepts such as analysis (derivatives, integrals, sequences) or linear algebra (matrices, vector spaces). The goal is to progress effectively, whether to consolidate knowledge or prepare for exams. Physics: From school level to higher education, I can support you in the different branches of physics taught in class: mechanics, electricity, thermodynamics, optics, waves, etc. Specially skilled in mechanics, I can also delve deeper into this subject for students who need it. Courses are adapted to each student according to their level and objectives. Whether for regular monitoring, exam preparation, or one-off support, I adapt to your pace. Courses available online or in person on the EPFL campus if possible.

Mohamed

5.0

(2)

الحمد لله كفائة عالية مع شواهد أكاديمية و خبرة مكتسبة.
شرح جيد مع لغة متقنة وتوفير جو
للمراجعة والدعم للخروج بأحسن نتيجة ممكنة إنشاء الله.
مع مراجعة قبلية لدروس لإنجاح الحصة والخروج بأكبر فائدة ممكنة، والانضباط لتعاليم المعلم وتوفير الأدوات المدرسية.

Adem

5.0

(2)

Soutien scolaire et cours de physique jusqu'au niveau 1 ère année universitaire. cours plus aide à la résolution d'exercices.
Concernant la génie mécanique, je peux enseigner le dessin industriel, la CAO avec l'apprentissage sur un logiciel tel que SolidWorks.
Cours de programmation informatique d'un niveau basique jusqu'à très avancé.

Jammal

5.0

(2)

Hi, my name is Jammal and I give math and physics lessons for all school levels.
I'm an aerospace engineer and I'm training to be an airline pilot :)

Fabio

5.0

(2)

Ingénieur en mécanique et aéronautique, je propose des cours de mathématiques ainsi que des matières liées à l’ingénierie industrielle, mécanique et aéronautique, du niveau secondaire au niveau supérieur (hautes écoles et universités).
J’ai plus de 5 ans d’expérience en cours particuliers, avec de nombreux élèves accompagnés vers la réussite de leurs examens et une meilleure compréhension des matières scientifiques.
Je peux aider notamment en :
– mathématiques (algèbre, analyse, statistiques, etc.)
– mécanique générale
– résistance des matériaux
– thermique
– bases de programmation scientifique (Python, Excel)
Les cours peuvent se donner en ligne ou en présentiel selon vos préférences.
J’adapte toujours ma méthode au niveau de l’étudiant, avec des explications claires, des exercices ciblés et un suivi personnalisé.
N’hésitez pas à me contacter pour discuter de vos objectifs et de vos besoins.

Abdessatar

5.0

(2)

Do you want to learn 3D design and drawing?
This course is for you. You learn :
- The basics of 3D design.
- The basics of mechanics.
- Manufacturing processes.
- Mastery of a 3D design software.

Yassine

5.0

(2)