Physics for all levels from Elementary school to University
✅ Experienced teacher gives private online lectures for all levels in physics ✅ Fully dedicated and focused on student progress ✅ Very patient, systematic and organized I teach many fields of physics, but some of them are the following: - physical quantities and units - kinematics (movement types, kinematics of material point and rigid body) - dynamics (frictional and inertial forces, Newton's laws) - laws of conservation - theory of collision processes - inertial and non-inertial systems - potential and kinetic energy - gravitation and gravity field - oscillatory and wavy motions - harmonic oscillator - Doppler's effect - standing waves - sound waves and physical sound characteristics - surface tension and capillary phenomena - fluid mechanics - temperature and heat - calorimetry - phase switches - principles of thermodynamics - electrostatics - electromagnetism - Kirchoff's law - electronic circuits - dielectrics - optics ... etc.
engineering sciences SI, NSI, SNT, electronics, automatics
===================Satisfied or refunded======================= Hello, I am a doctoral student in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer courses in engineering sciences (electronics, automatics, electrical engineering, automation, programming). Computational Sciences and Technology SNT IS engineering sciences Numerical and computer science SNI Digital electronics Analog electronic electromagnetism Signal processing and data acquisition Automatic (discrete, continuous) electrical engineering (transformers, electrical machines, switching power supply) C/C++ Programming, Assembler, ARM, STM32 renewable energy (wind, PV-solar) RDM - strength of materials mechanics of solids Python and SYSML PIC microcontroller Microprocessor MATLAB, proteus Preparation for competitions Supervision of graduation projects CAPLP Electrotechnical and Electronic Electrical Engineering CAPLP and BTS subjects and answers Correction caplp 2017 CAPLP 2018 CAPLP 2019 CAPLP 2020 CORRECTION OF BTS TESTS
mathématiques et physique et SVT et la langue anglaise
La leçon de mathématiques de base est conçue pour les étudiants qui ont une faible formation en mathématiques et qui peuvent manifester de l'anxiété en mathématiques. Le cours se concentre sur les opérations impliquant des fractions, des nombres décimaux et des pourcentages. La mesure, la géométrie, les statistiques et les principes de l'algèbre sont également introduits. La leçon de physique est une branche de la science axée sur l'étude de la matière, de l'énergie et du mouvement. La physique englobe des sujets tels que la composition de l'univers, la mécanique, la thermodynamique, l'électromagnétisme, l'optique, le rayonnement, l'acoustique et bien plus encore. Le cours d'anglais général donne à l'apprenant une base solide des aspects de la langue anglaise tels que les compétences d'expression orale, d'écoute, de lecture et d'écriture avec un accent particulier sur l'utilisation naturelle de l'anglais, ainsi que sur le développement de la grammaire et du vocabulaire. La leçon de génie électrique est une discipline technique concernée par l'étude, la conception et l'application de l'électricité! Grâce à l'ingénierie électrique, nous pouvons concevoir des dispositifs et des systèmes utilisant des composants électriques tels que des résistances, des condensateurs, des transistors, etc.
MATHS-PHYSICS-ELECTRIC exam preparation
Professor in mathematics, computer science at HEFF in Brussels and before a professor of electronics at the IEPSCF, ENGINEER in electronics ECAMIEN graduated in mathematics-physics and I propose an individualized pedagogy, an aid in the preparation of the interrogations or exams. My goal is to advance the student without overloading him. I give homework after each lesson and periodically provide progress reports. I strongly encourage the student because the state of mind and morale have a direct influence on school results. I am someone understandable and I always try to take each in his own way. I always start by clarifying the course after giving an example then giving an example to the student plus doing a full exercise and finally correcting an exam together generally this is methodology but it can change from one case to another revise the courses studied in class. give remarks that makes the job easier. give the tips and tricks you need to get a good rating. try to make the student quick in these calculations and demonstrations and give the way in which he should manage his duty
Electrical Engineering Courses for Students :: Beginner and Advanced Levels
Electrical Engineer with more than 6 years of experience, offers personalized training support for future graduates, technicians and engineers: Module expertise: - LV/MV Distribution System - Electrical Network Engineering - Electrical engineering - Analog and digital electronics - Power electronics & VFD Applications, - Digital Transmission, - Software Training: Caneco BT, Etap V12.6, ISIS Proteus, Dialux, Rapsody .... As well, the supervision of students during the end-of-study internships You're welcome
Math lessons (possible in English & French), high school and university levels
Online mathematics, physics, electrical engineering courses, both in french and english available for high school, undergraduate and graduate level students. Reviewing main concepts seen in class, solving problems, practicing. A laptop and tablet are used to make online teaching efficient and enjoyable.
Learn how to ace all Electrical Engineering courses.
I have a bachelor's degree in Electrical Engineering- Telecommunications from SBU university in Iran. SBU is one of the top 5 universities in Iran. I was always among the top three students during my undergrad. I am specifically good at Math, Programming, and Electrical Circuits analysis. During my undergrad, I was a TA for AVR micro-controllers programming and probability & statistics courses, during which I gained lots of teaching experience. During my bachelor's thesis, I implemented Behavioral Cloning (end-to-end) approach for self-driving by programming Artificial Neural networks in python with Keras and Tensorflow frameworks. I am currently a master student in the ECE department of McGill University working in the field of Computer Vision at Visual Motor Research Lab and am a member of Center for Intelligent Machines (CIM) at McGIll. I believe that learning is only effective when you have a question in mind. Thus, I always try to first stimulate student's curiosity on the subject and talk about its application, before teaching that subject to them. Also, I teach the subjects very slowly and step by step to allow students to think deeply about everything I teach to them. Also, my courses' syllabus is flexible and I usually consult them with students on the first session.
Electronic Engineering Student 10 years experience gives electronics courses in Bordeaux.
My teaching method is based on the acquisition of fundamental knowledge of general electronics followed by specialization according to needs in more specific areas of electronics. The courses consist of a theoretical part followed by exercises adapted according to the level and for each notion.
ELECTRONIQUE ELECTROTECHNIQUE AUTOMATIQUE INFORMATIQUE INDUSTRIELLE
I am an associate professor of electrical engineering I offer courses in all that has to do with the discipline electrical engineering: CPGE / BTS / DUT / IUT / DTS / UNIVERSITY / High technical school ELECTRONIC AUTOMATISM ELECTROTECHNICAL ROTATING MACHINERY POWER ELECTRONICS SMART GRID AUTOMATIC INDUSTRIAL IT graduation projects ROBOTICS SIMULATION / MATLAB, PROTEUSE, PSIM … MICRO C/ MPLAB/ PYTHON/ ARDUINO IDE / tia portal/ STEP 7 programmable logic Controller
Engineering Tutoring with Mentoring: Easy and Effective! - Aerospace/Mechanical/Electrical Engineering
In these Engineering Classes, I guide, mentor, and facilitate your growth and intuitive technical understanding. I share my experiences with Aerospace/Aeronautical/Mechanical/Electrical Engineering, helping you develop your skills and techniques to tackle any problem, whilst adapting our lessons to your natural method of learning. Contact me to introduce yourself and tell me more about the topics that you would like additional support with. This could be, for example, - Aero/ Flight Dynamics - Control Systems - Dynamic Structures, or even - Business Data Analysis. Whatever university you are studying at, I am certain that you will leave our sessions fulfilled, inspired, and driven to take on any challenge that may come your way. Contact me now for my availability, so that we can organize your first session as soon as possible. I look forward to meeting you! __________________________________________________________________________________ Previously supported students from top universities such as: UK: - Imperial College London (+ Business School) (ICL) - University College London (UCL) - King's College London (KCL) NL: - Delft University of Technology (TUDelft) - University of Amsterdam - University of Groningen AU - Queensland University of Technology - University of Queensland - Griffith University __________________________________________________________________________________ I little about myself: My name is Anh; I am born and raised in the U.K. and I have over 8 years of international experience, tutoring Middle School to University Level Maths, Sciences and Engineering, with 4 years of experience working in the Aerospace and Maritime industry. I have a fun, ambitious and outgoing personality with a passion for music, cooking, and trying new things. Whilst teaching and mentoring, I am patient and adaptable to the needs of each of my students. I am working as an Engineering Specialist/Consultant, holding: - a degree as a Master of Aeronautical Engineering from Imperial College London, - A*A*A* A-Level Further Maths and Physics, with, - straight A*s in (GCSE) Maths, Physics, Chemistry, Biology, English, Geography. I was also previously mentored and tutored myself and having been through the problems and achievements first-hand, I want to help others do so as well.
Physics courses for university and secondary students
Teaching physics courses for university majors In English A simplified and detailed explanation of undergraduate courses is provided in the Physics course, such as: Electronics - electricity - magnetism - solids - spectra - general physics Electronics - Electricity - Magnetism - Spectroscopy - General Physics
VIP-Scholar: Practical technology and science e-classes for beginners
These top-notch technology classes for scholars (absolute beginners to intermediate level) are made understandable through simple projects. Every mini-project has a fundamental theoretical part, but the most prominent part is practical. While becoming tech-savvy and skillful in DIY tinkering, you will learn much with these lesson packages (alternative energy, robots, electronics, electrical engineering, magnetism, and soldering or assembling techniques). These lessons give the youngster a lot more confidence and hands-on knowledge to solve and implement specific scientific issues)
Mathematics, yoga, vedic maths, science and technology
Deep down, every good teacher knows the impact and importance of education. It isn’t just about learning reading, writing and arithmetic at school. Instead, formal education is about gaining the knowledge and the skills needed to become a better person and create a better society to live in as my dream to give quality and experimental based teaching methodology. As i believe in learning while playing and realistic way of knowing subject by performing experiment to know subject from basic.
Electronics, programming and robotics with ARDUINO and ESP32
ARDUINO is a free hardware microcontroller. It is very useful for learning electronics and coding at the same time. It is very estimating thanks to that we can solve problems and look at the results physically. Thanks to the size of its community and the openness of its philosophy, information is widely accessible. Arduino allows us to undertake countless projects of all kinds. In a way, it's a small door through which you can easily access the world of makers. Among others. In the particular case of the arduino, my main goal is to stimulate creativity and curiosity. In addition to allowing my student to acquire a level of competence which allows him to function alone. I am used to working with people of different ages. I believe in segmentation, visualization of progress, objective results and practice. Beyond these general lines, there is no rule or magic method. Some things work with some students and not with others. Adapting to needs is really the goal of private lessons. So I will do my best to find what motivates and helps my student.
Learn How to use Microcontroller Arm based with Xilinx , mbed and Arduino
I specialize in tutoring Microcontrollers (ARM Based on Xilinx and mbed and Arduino) and I am a teaching assistant in microcontrollers at Concordia university. My goal is to keep students learning this course and recognize how they can use this course in their real life and maybe they can make a startup in the future life based on microcontrollers. I assign homework after every lesson and provide periodic progress reports. If you are an absolute beginner, don't worry. The microcontroller course is one of the great courses that you can enjoy it.