Project Design for development institutions: You will learn the process of designing a new project - Lilongwe - Privélessen

Publiceer een Les

Project Design for development institutions: You will learn the process of designing a new project

Van 54 $ /h

This course is for both government and non government agents involved in designing and implementing development projects. You will learn about the project cycle, planning, implementation, monitoring and knowledge management, supervision and finally evaluation

Extra informatie

You should have a laptop and reliable internet access

Locatie

Online vanuit Malawi

Over

I'm passionate about African development through access to finance and financial inclusion. I would like to promote development of successful professionals in microfinance, rural finance and financial inclusion.

Opleiding

University of Nairobi, MBA with specialization in strategic management and Bachelors in Business Administration. Several certificates in microfinance and enterprise development

Leservaring

over 14 years as a microfinance practitioner and 15 years as a consultant focusing in training, project design, and project evaluation

Leeftijd

Volwassenen (18-64 jaar oud)

Niveau van de leerling

Beginner

Gemiddeld

Duur

60 minuten

De les wordt gegeven in

Engels

Vaardigheden

Project management

Beschikbaarheid typische week

(GMT -04:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Microfinance & Rural finance; the students will learn about microfinance best practices theory and practice

72 $ /h

I specialize in offering custom tutorials online and helping college students studying for diploma and degree course in microfinance, rural finance and or development finance to clarify concepts and offer practical suggestions/examples to help them complete their courses successfully.
Secondly , I offer structured short courses to junior and mid level managers of microfinance institutions, NGOs and Banks to help them become better managers and leaders in their respective roles. For this group I give tests at the end of each module

Lees meer

Small Business Management training: Learn how to plan and start/run your own business

54 $ /h

This is class is for those aspiring to start their own business, or are already in business and would like to improve systems and management of the business. You will learn about business planning, how to fund the business, marketing and customer service

Lees meer

Scope management, planning management, resource management, cost management, communication management, quality management, risk management

Introduction to agile project management.
Suitable for startups & scale ups.

Curriculum to be compiled after the first intake interview.
Example of topics:
- Project management for dummies
- Agile
- Scrum
- Kanban
- Scaled scrum / kanban
- Applied startups
- Applied scaleups
- Applied corporations
- ...

Agile Project Management is a successful and popular method for managing incremental and iterative development of solutions. Requirements and functionality are defined and delivered in small quick steps in consultation with the customer. Agile Project Management has project phases and project roles that cleverly respond to each other.

Companies and organizations want to see the added value of their projects faster and faster. Flexible (agile) development methods focus on quickly delivering useful sub-products. But a flexible development approach - aimed at product developers - alone is not enough. How do you give the project management team the maximum freedom needed to excel without losing control of the project as a business responsible manager? The Agile Project Management Foundation training gives you insight into this.

During this interactive workshop I will take you into the world of Lean.

Lean is an international method that is applied within many companies. Lean has many tools and many roles.

That is why there are different levels, also called 'belts', where training can be followed. This Lean light workshop does not fall under a belt, but gives a summary of the basics and the most important tools that can be applied immediately.

Lean is about working more effectively and efficiently by looking at processes.

This can be a process within your own company, or the process at home of making coffee, for example.

After this workshop:
- You know where Lean originated and you recognize the house of Toyota
- Do you know which waste Lean recognizes and can you recognize this within your own work / private environment
- Do you know how to apply the 5S method? It is no longer possible to see any improvement potential.

Invest 1.5 hours of your time and get to know this versatile method in an accessible way, namely at home behind the computer with your own cup of coffee or soft drink. ;-)

Engineer, Doctor of Applied Sciences,
Project Director, People Manager

Management of Technical and / or Industrial Projects
All School & Professional Levels
One-off Intervention and / or Global Global Project Management (turnkey)
Planning, Subcontracting, ...

Discover the basics of Marketing! I have a Master's degree in the subject (as well as Economics) ,as well as being Six Sigma Green belt certified.
Whether you are curious about it, need a refresher session(s) or help with the creation of your Business Plan, I am here for you!

Examenplanning is de start van een rustige blok- en examenperiode! Begin er vroeg aan en je hoeft je geen zorgen te maken over wat er komt want je hebt een duidelijk overzicht van wat je te doen staat. Uiteraard met de nodige ruimte voor ontspanning en 'cheat' dagen ;-)
Neem nu contact op voor de 2de zit zodat je toch kan genieten van je vakantie!

A 32-year-old university graduate, management engineer, with 8 years of professional experience offers her teaching services for LEAN management and PROJECT management methodologies.

1H or 1H30 training depending on your current knowledge
For adults - private or company
My training is identical to the official certification and gives you all the essential notions to use it in your working life

Video training for 1 student - On site for groups (decreasing price per person and extended duration)

Feel free to contact me for more information !
See you soon

Hello !

My name is Clarissa and I am a seasoned professional in the field of IT project management.

With over 20 years of experience as a Quality Assurance Manager for international projects and deep expertise in ERP implementation, I offer customized courses to help you excel in IT project management.

What I propose:
- Introduction and improvement in IT project management
- Management and planning of complex ERP projects
- Project quality audit techniques and key control points to ensure success
- Risk analysis and management - Project management methodologies (Agile, Waterfall, hybrid)
- Techniques for effective communication with stakeholders and teams Who are my courses for:
- Computer science or management students wishing to discover project management
- Early career professionals looking to deepen their skills
- Project managers wishing to improve their project management practices
- Anyone interested in IT and ERP project management

Why choose me:
- Proven expertise in project management and quality auditing
- International experience and in-depth knowledge of multicultural environments

- Courses in French, English, Dutch, or Italian -
Teaching methods adapted to your level and your objectives
Practical details:
- Courses available online (via Zoom or other platform)
- Flexible hours, adapted to your availability

Contact me with any questions or to schedule a free initial trial session!

📄 Tutoring for Final Year Projects in Engineering

(Mechanical, Electrical, Civil, Electromechanical, Mechatronics, Automation, Materials Science)

👋 I am Christian, a civil engineer and PhD student in mechanical engineering, with more than 15 years of experience in engineering and in supporting students for their Final Year Projects (FYP).

I offer comprehensive and personalized support to help you succeed in your final year project (TFE/PFE), covering all levels: Bachelor's and Master's degrees, and all fields:

⚙️ Mechanical Engineering

⚡ Electrical Engineering

🏗️ Civil Engineering

🤖 Electromechanics, mechatronics and automation

🧪 Materials science and applied materials

With advanced skills in:

💻 3D modeling and CAD/CAM: SolidWorks | Inventor | Creo | CATIA V5 | Fusion 360 | AutoCAD 2D/3D

🛠️ Simulation and Finite Element Analysis (FEA): NASTRAN, ANSYS, SolidWorks Simulation

🔧 Mechanical and electromechanical design, complex assemblies and industrialization

📊 Technical calculations, optimization and tolerances

📝 Drafting the technical report and preparing for the presentation

⚡ Practical tips for meeting deadlines and deliverables

🎯 For whom?

Students in mechanical engineering, civil engineering, electrical engineering, electromechanical engineering, mechatronics, automation, materials science and related disciplines

Bachelor and Master's students

Those who wish to successfully complete their final year project (TFE/PFE) with professional support

Students wishing to master CAD/FEA software and simulations applied to their project

🧠 Methodology

🔍 Initial assessment of the project and objectives

🛠️ Step-by-step plan to guide modeling, simulations and design

📈 Ongoing support to resolve technical issues and achieve academic goals

🤝 Personalized support to ensure the success of your project and your presentation

🏭 Thanks to my experience of more than 15 years as a civil and mechanical engineer, I always link theory to concrete applications and industrial standards, allowing your final year project / final year project to get closer to real and professional projects.

📩 Ready to successfully complete your Bachelor's or Master's thesis/final project with confidence?
Contact me for an initial discussion and a personalized tutoring plan.

Scope management, planning management, resource management, cost management, communication management, quality management, risk management

Introduction to agile project management.
Suitable for startups & scale ups.

Curriculum to be compiled after the first intake interview.
Example of topics:
- Project management for dummies
- Agile
- Scrum
- Kanban
- Scaled scrum / kanban
- Applied startups
- Applied scaleups
- Applied corporations
- ...

Agile Project Management is a successful and popular method for managing incremental and iterative development of solutions. Requirements and functionality are defined and delivered in small quick steps in consultation with the customer. Agile Project Management has project phases and project roles that cleverly respond to each other.

Companies and organizations want to see the added value of their projects faster and faster. Flexible (agile) development methods focus on quickly delivering useful sub-products. But a flexible development approach - aimed at product developers - alone is not enough. How do you give the project management team the maximum freedom needed to excel without losing control of the project as a business responsible manager? The Agile Project Management Foundation training gives you insight into this.

During this interactive workshop I will take you into the world of Lean.

Lean is an international method that is applied within many companies. Lean has many tools and many roles.

That is why there are different levels, also called 'belts', where training can be followed. This Lean light workshop does not fall under a belt, but gives a summary of the basics and the most important tools that can be applied immediately.

Lean is about working more effectively and efficiently by looking at processes.

This can be a process within your own company, or the process at home of making coffee, for example.

After this workshop:
- You know where Lean originated and you recognize the house of Toyota
- Do you know which waste Lean recognizes and can you recognize this within your own work / private environment
- Do you know how to apply the 5S method? It is no longer possible to see any improvement potential.

Invest 1.5 hours of your time and get to know this versatile method in an accessible way, namely at home behind the computer with your own cup of coffee or soft drink. ;-)

Engineer, Doctor of Applied Sciences,
Project Director, People Manager

Management of Technical and / or Industrial Projects
All School & Professional Levels
One-off Intervention and / or Global Global Project Management (turnkey)
Planning, Subcontracting, ...

Discover the basics of Marketing! I have a Master's degree in the subject (as well as Economics) ,as well as being Six Sigma Green belt certified.
Whether you are curious about it, need a refresher session(s) or help with the creation of your Business Plan, I am here for you!

Examenplanning is de start van een rustige blok- en examenperiode! Begin er vroeg aan en je hoeft je geen zorgen te maken over wat er komt want je hebt een duidelijk overzicht van wat je te doen staat. Uiteraard met de nodige ruimte voor ontspanning en 'cheat' dagen ;-)
Neem nu contact op voor de 2de zit zodat je toch kan genieten van je vakantie!

A 32-year-old university graduate, management engineer, with 8 years of professional experience offers her teaching services for LEAN management and PROJECT management methodologies.

1H or 1H30 training depending on your current knowledge
For adults - private or company
My training is identical to the official certification and gives you all the essential notions to use it in your working life

Video training for 1 student - On site for groups (decreasing price per person and extended duration)

Feel free to contact me for more information !
See you soon

Hello !

My name is Clarissa and I am a seasoned professional in the field of IT project management.

With over 20 years of experience as a Quality Assurance Manager for international projects and deep expertise in ERP implementation, I offer customized courses to help you excel in IT project management.

What I propose:
- Introduction and improvement in IT project management
- Management and planning of complex ERP projects
- Project quality audit techniques and key control points to ensure success
- Risk analysis and management - Project management methodologies (Agile, Waterfall, hybrid)
- Techniques for effective communication with stakeholders and teams Who are my courses for:
- Computer science or management students wishing to discover project management
- Early career professionals looking to deepen their skills
- Project managers wishing to improve their project management practices
- Anyone interested in IT and ERP project management

Why choose me:
- Proven expertise in project management and quality auditing
- International experience and in-depth knowledge of multicultural environments

- Courses in French, English, Dutch, or Italian -
Teaching methods adapted to your level and your objectives
Practical details:
- Courses available online (via Zoom or other platform)
- Flexible hours, adapted to your availability

Contact me with any questions or to schedule a free initial trial session!

📄 Tutoring for Final Year Projects in Engineering

(Mechanical, Electrical, Civil, Electromechanical, Mechatronics, Automation, Materials Science)

👋 I am Christian, a civil engineer and PhD student in mechanical engineering, with more than 15 years of experience in engineering and in supporting students for their Final Year Projects (FYP).

I offer comprehensive and personalized support to help you succeed in your final year project (TFE/PFE), covering all levels: Bachelor's and Master's degrees, and all fields:

⚙️ Mechanical Engineering

⚡ Electrical Engineering

🏗️ Civil Engineering

🤖 Electromechanics, mechatronics and automation

🧪 Materials science and applied materials

With advanced skills in:

💻 3D modeling and CAD/CAM: SolidWorks | Inventor | Creo | CATIA V5 | Fusion 360 | AutoCAD 2D/3D

🛠️ Simulation and Finite Element Analysis (FEA): NASTRAN, ANSYS, SolidWorks Simulation

🔧 Mechanical and electromechanical design, complex assemblies and industrialization

📊 Technical calculations, optimization and tolerances

📝 Drafting the technical report and preparing for the presentation

⚡ Practical tips for meeting deadlines and deliverables

🎯 For whom?

Students in mechanical engineering, civil engineering, electrical engineering, electromechanical engineering, mechatronics, automation, materials science and related disciplines

Bachelor and Master's students

Those who wish to successfully complete their final year project (TFE/PFE) with professional support

Students wishing to master CAD/FEA software and simulations applied to their project

🧠 Methodology

🔍 Initial assessment of the project and objectives

🛠️ Step-by-step plan to guide modeling, simulations and design

📈 Ongoing support to resolve technical issues and achieve academic goals

🤝 Personalized support to ensure the success of your project and your presentation

🏭 Thanks to my experience of more than 15 years as a civil and mechanical engineer, I always link theory to concrete applications and industrial standards, allowing your final year project / final year project to get closer to real and professional projects.

📩 Ready to successfully complete your Bachelor's or Master's thesis/final project with confidence?
Contact me for an initial discussion and a personalized tutoring plan.

Good-fit Leraar Garantie

Contacteer Teresa