Static and mechanics of materials and structures, material science

من 47.8 $ /س

I have a Ph.D in civil engineering and I have been teaching for 17 years. During 10 years, I was assistant in University for the classes of static and mechanics of materials, after 2014 I have been teaching in private.
I propose online classes where the student has an active role.

المكان

عبر الانترنت من إيطاليا

من أنا؟

I have a Ph.D. in civil engineering and I have been teaching for 17 years. Teaching is my passion. For the first part of my career, I was assistant in University, for the second part I have been teaching in private to students from all over the world.

المستوى التعليمي

Post doc: civil engineering (Crack propagation glass under stress corrosion)
Ph.D. : civil engineering
Master and bachelor diploma: Architecture
Teaching experience: 17 years

الخبرة / المؤهلات

During my research experience, I studied the behavior of structural glass under loads and under the effect of environmental stress corrosion.

السن

الكبار (18-64 سنة)

الكبار (65 سنة فأكثر)

مستوى الطالب

مبتدئ

متوسط

متقدم

المدة

60 دقيقة

الدرس يدور باللغة

الإنجليزية

الفرنسية

الإسبانية

الإيطالية

مهارات

الهندسة التطبيقية

الهندسة المعمارية

هندسة هيكلية

الجاهزية في الأسبوع العادي

(GMT -05:00)

نيويورك

على الانترنت عبر كاميرا ويب

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Sarah

4.74

(23)

A talented, experienced, very creative and studious architect offers private lessons and assistance in various tasks related to architecture:
*help with designing plans (houses/offices/businesses, shopping centers, clinics, etc.)
* training and realization of 3D plans
* realization and training in AUTOCAD
*design, correction of projects, research of ideas, models, etc....
*Revit: learning and correction...
+ personalized training according to the needs for students and professionals in minimum time and remotely across the world

Abdelali

4.74

(23)

Hello, I am an electrical and electronic engineer with extensive experience as a professor in higher education in engineering sciences and electrical engineering, as well as a rich experience as an embedded systems engineer, in EE architecture, ADAS, Testing and validation in the automotive sector.

I offer support courses and training in engineering science subjects for graduate students, particularly in Matlab Simulink programming. My methodology is based on the acquisition of knowledge and course concepts in a very simple way and also on practice using the most widely used software on the market.

Matlab is both software and a scientific programming language developed by the American company MathWorks which allows various numerical calculation operations to be carried out. For example, manipulating algorithms, displaying data curves or even generating matrices. It is used in everything that is programming, signals and systems, signal processing... It contains another part of graphical programming called Simulink, dedicated to the programming and modeling of dynamic systems (Widely used in the discipline of automatic and industrial regulation).

I also give courses and training in:

Embedded systems, ADAS systems and automotive engineering
Electrical and electronic circuits
Automatic
Industrial regulation
Signal processing
C Programming, Assembler, PIC, Arduino
LabVIEW
PIC microcontroller
Microprocessor

Khaldoun

4.74

(23)

Are you interested in mastering structural analysis software like ETABS and Robot Structural Analysis? Whether you're a student, a recent graduate, or a professional looking to enhance your skills, my classes are designed for you!

About Me:
I am a freelance structural engineer with extensive experience in analyzing and designing various projects, including both concrete and steel structures. I have successfully collaborated on university projects, bridging the gap between theoretical knowledge and practical application. My goal is to empower you with the skills and knowledge needed to excel in the field of structural engineering.

Course Outline:
Introduction to Structural Analysis:
Fundamentals of structural engineering
Overview of software applications in design

ETABS:
• ETABS is one of the premier software applications for structural analysis and design, tailored specifically for building systems. In our ETABS module, you'll gain a comprehensive understanding of its powerful capabilities. We will cover the essential features, including how to create complex models of multi-story buildings, apply various loads, and analyze their responses to dynamic forces such as wind and earthquakes. You will learn best practices for reinforcing concrete structures and optimizing designs for both strength and serviceability. Through hands-on projects, you will become proficient in interpreting analytical results, generating design reports, and ensuring compliance with international design codes. By the end of this segment, you will have the ability to confidently utilize ETABS for real-world engineering challenges.

Robot Structural Analysis:
• Robot Structural Analysis is a robust software solution that provides advanced simulation capabilities for structural engineers tackling intricate design challenges. In our Robot module, you'll explore the software's extensive tools for analyzing a wide range of structures, from simple beams to complex frames and trusses. We will delve into advanced analysis methods, including linear and non-linear static analysis, dynamic response analysis, and more. You will learn how to effectively use load combinations, perform detailed design checks for both concrete and steel structures, and evaluate the structural integrity under various loading conditions. This module emphasizes the importance of optimal performance and efficiency in design, equipping you with the knowledge to use Robot Structural Analysis for sophisticated project requirements. Real-life case studies will provide valuable context and enhance your practical skills.

Concrete and Steel Design:
Principles of design for both materials
Practical case studies and projects

Freelancing Tips:
Managing client projects
Best practices for successful freelancing in structural engineering

Course Goals and Outcomes
Within just 10 sessions, you will develop the necessary skills to work with either ETABS or Robot Structural Analysis, enabling you to take on real-world projects confidently. By the end of the course, you will be well-prepared to apply your knowledge and expertise in practical engineering scenarios

Why Choose My Classes?
Hands-on experience with real-world projects
Interactive learning environment
Personalized guidance tailored to your learning pace

Ahmd

4.74

(23)

Statics and dynamics are the main subjects for level one engineering students.
You will understand these subjects perfectly.
Together, you will understand vectors, motion in multiple directions, relative motion, Newton's laws of motion, .... and simple harmonic motion.

Samaa

4.74

(23)

I am a highly skilled and experienced Architect with a great experience in Architecture software. Photoshop is an important software, not only for Architects. I'm Strongly knowledgeable about all approaches of Photoshop. More than anything else, a Creative designer with a will for improving learners` productivity levels as well as improving learning experiences. I work with Adobe Photoshop, Autocad, and Revit in addition I can train you to use most graphic design applications.

Rania

4.74

(23)

[ENG]: Infrared (IR) spectroscopy is a powerful analytical technique used to study the vibrational patterns of molecules. It is widely used in the fields of chemistry, biochemistry and materials science to identify and characterize chemical compounds. Understanding the interpretation of infrared spectra is crucial for accurate analysis of complex samples.
In this online course, you will learn the basics of infrared spectroscopy and its application in chemical analysis. You will learn how to interpret infrared spectra, including identifying characteristic peaks and understanding their relationship to specific chemical functional groups and ligands. You will also learn how to use infrared spectroscopy for quantitative analysis, and how to analyze complex spectra.

By the end of this course, you will have a strong foundation in infrared spectroscopy and will be able to analyze and interpret infrared spectra with confidence. This course is suitable for students and professionals in the fields of chemistry, biochemistry and materials science who wish to expand their knowledge of analytical techniques

Join us to unleash the potential of infrared spectroscopy in your research and analysis.

[French]: La Spectroscopie infrarouge (IR) is an analytical technique for permanently performing vibrational modes of molecules. It is large in the domains of chimie, biochemistry and materia science to identifier and react to chemical compositions. Comprendre l'interpretation des Specters IR is essential for analyzing précise d'échantillons complexes.

Color formations in line, the broad application of infrared conformational rules and the application of its son in chimique analysis. Numerous opinions and comments on the infrared spectra, the testimony in the selected images and the close relationship between the artistic groups and the relationships between chimeric species. également également à utiliser la Spectroscopie IR for quantitative analysis and spectrum complex analyzer.

Accurate disc formation, solid base and IR spectroscopy et al are able to analyze and interpret infrared spectra in confidence. These courses are addressed to students and professions in the fields of chemistry, the body, biochemistry and the science of matériaux that souhaitent élargir leurs connexiones des analytical technologies.

Rejoin us to edit the effective IR spectroscopie in your searches and analysis.

Ayoub

4.74

(23)

This preparation session is dedicated to students aiming for preparatory classes for scientific Grandes Ecoles (CPGE), with a particular focus on the subjects of Physics and Engineering Sciences. The goal is to strengthen the foundations and deepen the knowledge to succeed.

1. Mechanics:
Kinematics: Study of rectilinear and circular movements, position vectors, speed and acceleration.
Dynamics: Newton's laws, work and energy, kinetic energy theorem.

2. Electromagnetism / Electrokinetics:
Electrostatics: Electric charges and fields, electric potential, capacitance.
Magnetostatics: Magnetic fields, Lorentz forces, electromagnetic induction.
Alternating Currents: RLC circuits, resonance, impedance.

3. Thermodynamics:
Principles of thermodynamics: Internal energy, heat, work, first and second principles.
Ideal and real gases: Equations of state, thermodynamic transformations.

4. Industrial sciences:
Automatic Linear, Kinematic, Static.

For more information and to register for the preparation session, please contact me.

Good preparation and success in your studies!

.

Mahmoud

4.74

(23)

If you are stuck with a design project, be it a house, a public building, a landscape, or even a piece of the city, I am here to help! I have three years of experience in teaching at the university level, and I am always keen to work with you on the conceptual, artistic, and technical dimensions of your design projects no matter the scale. I can also work with you to acquire foundational design skills and prepare you for future studies.

Together we will touch upon:
1- The design process and tools. (e.g. conceptualizing, sketching, modelling, contextualizing, mapping, diagramming)
2- Aesthetic and practical considerations (e.g. expression, quality, human perception, climate, sustainability)
3- The spatial experience and how to materialize it (e.g. space and structure, flow and movement, materiality, detailing)
4- the modes of architectural drawing and visualization (e.g. plans, sections, elevations, axonometrics, perspectives, collages, layouts)
5- Relevant softwares (e.g. AutoCAD, Rhino3D, Photoshop, Illustrator, InDesign)

Ali

4.74

(23)

📐 Civil & Structural Engineering Tutoring – Master Statics & Mechanics of Materials**
Are you a student struggling with the foundational subjects of civil and structural engineering? I offer one-on-one tutoring designed to help you confidently tackle core topics like **Statics** and **Mechanics of Materials**.

With a strong background and proven proficiency in these subjects, I provide clear explanations, step-by-step problem-solving strategies, and personalized guidance tailored to your course and learning style. Whether you're preparing for an exam, working through tough assignments, or just need concepts clarified, I’m here to help you build a solid understanding.

**Topics Covered Include:**

* Equilibrium of forces and moments
* Free-body diagrams
* Trusses, frames, and beams
* Internal forces (shear and moment diagrams)
* Stress and strain analysis
* Axial, torsional, bending, and shear stresses
* Mechanical properties of materials
* Mohr’s Circle, deflection, and more

**Who It's For:**

* Civil & Structural Engineering undergrads
* Students in related engineering programs taking statics/mechanics courses
* Anyone needing a refresher on fundamental mechanics

**Session Format:**

* Online (via Zoom, Teams, or your preferred platform)
* Flexible scheduling
* Homework help, exam prep, or concept reviews

Let’s simplify the complex and get you confident in your courses!

لميس

4.74

(23)

This engineering drawing lesson aims to teach students the basics of drawing geometric shapes and drawings accurately using the correct tools. It also includes training in drawing projections, perspective, and correcting mistakes step by step. The focus is on simplifying complex concepts and linking them to practical applications in architecture and engineering. The lesson is suitable for beginners and those wishing to strengthen their technical and structural drawing skills.

Abdul

4.74

(23)

About the Lesson
This class is designed for students preparing for or currently studying an Engineering Foundation Year. The lessons focus on the mathematical skills required to progress confidently into undergraduate engineering studies.
Topics include:
• Algebra, functions, and trigonometry
• Calculus (differentiation and integration)
• Vectors, matrices, and complex numbers
• Basic statistics and data handling
• Engineering problem-solving and applications
Teaching Approach
I explain mathematical concepts clearly and link them directly to engineering examples. Each session includes interactive exercises, worked examples, and practice questions. Students receive notes and feedback after every lesson to help track progress.
Who It’s For
Suitable for:
• Foundation and first-year engineering students
• Anyone needing extra support in engineering maths

Lessons are delivered online in a supportive and engaging environment that builds both understanding and confidence.

Ahmed

4.74

(23)

With over 20 years of hands-on experience as a Commercial Aircraft Aviation Maintenance Engineer, I provide practical, easy-to-understand training in Aviation Maintenance Engineering Basics.
My real-world background allows me to simplify complex aircraft systems and teach you exactly what matters in the field.

Specialized Type Rating Support

I can also help you understand and master topics related to:

Airbus A320

Embraer E170

Including their key systems, troubleshooting methods, and maintenance practices.

Electrics & Avionics — Explained Simply

I offer deep, beginner-friendly and technician-level explanations in:

- Aircraft Electrical Systems

- Avionics

- Practical maintenance concepts, safety, and procedures

Hassan

4.74

(23)

I am ready to teach anyone who has a problem in math or physics. As well as supervising the research and graduation project for the senior students in biomedical engineering, electronic engineering, and nuclear engineering.
Willing to contribute research and co-author and edit for scientific paper

Mohamed

4.74

(23)

Learn calculus from an instructor with proven experience tutoring advanced calculus at the college level. This course combines rigorous academic standards with clear, student-centered explanations to help learners truly understand challenging concepts.

With experience guiding university students through advanced topics, the instruction is practical, thorough, and focused on long-term mastery—ideal for students pursuing mathematics, engineering, or science.

Ali

4.74

(23)

Physics and materials science can be challenging without the right explanations. I offer structured, clear, and personalized tutoring to help students truly understand concepts rather than memorize formulas.

I hold a PhD in Materials Science & Nanotechnology and have several years of experience teaching and mentoring university students in physics, materials science, and semiconductor-related topics.

My classes are adapted to the student’s level and goals, whether you are:
- Preparing for university exams
- Studying engineering or physics
- Struggling with core concepts and problem-solving
- Looking to deepen your understanding for research or advanced studies

Topics can include (but are not limited to):
- General Physics (mechanics, electromagnetism, thermodynamics)
- Solid-State Physics & Semiconductor Physics
- Materials Science fundamentals
- Nanotechnology & MEMS basics
- Exam preparation and problem-solving strategies

I focus on clear explanations, step-by-step problem solving, and building confidence. Lessons are interactive and always tailored to your needs.