Structural Design and Detailing for Structural Engineers - Privélessen

Publiceer een Les

Structural Design and Detailing for Structural Engineers

Van 135.43 € /h

Structural Engineering is an important course in constructing new buildings, checking for their maintainance, safety of users, and realization of a client's dream.

For those interested in Structures or already working as structural engineers, this course will immensely add value to sharpening your DESIGN skills in Reinforced Concrete, Steel and Timber according to American, NBCC, Eurocodes or British Standards. Entire courses are available for complete design of structures and making a Structural report for each project.

CAD SOFTWARE is so important for communicating what an Architect or Engineer designs for new construction / maintenance of structures.

There are full courses for
1. Revit Architecture
2. Staad Pro.
3. AutoCAD
4. SketchUp

Extra informatie

Bring your own laptop

Locatie

Online vanuit Oeganda

Over

Am Ronald from Uganda. I have been in the Structural Engineering profession for five years now. I have designed and detailed Reinforced Concrete, Steel, and Timber structures using Staad Pro and Autocad. I have taught at university too for 3 years. I prefer webcam for teaching sessions. Having been a student too, I understand what being one is like and so know how to get the best out of my students.

Opleiding

2014
Bachelor's degree in Civil Engineering - Kampala International University

2010-2003
Ordinary and Advanced level Education at Our Lady of Good counsel SSS Gayaza Uganda.

Leservaring

5 years in Structural Engineering in detailing and designing.
Bachelor of science in Civil Engineering from Kampala International University 2014.

My experience in starting a new Structural Project is as follows:
1. Get the CAD file from Architect.
2. Overlay floor plans to position columns, beams, and slabs.
3. Draw the frame in Staad Pro.
4. Analysis is done to get Moments and Shears on Structural elements of the Model.
5. Design the model to get the adequate cost effective number of bars, section sizes, and depth of all structural elements.
6. Details all structural elements in CAD.
7. Make a Structural Report ready for stamp from a licensed Engineer.

Leeftijd

Volwassenen (18-64 jaar oud)

Senioren (65+ jaar oud)

Niveau van de leerling

Beginner

Gemiddeld

Gevorderden

Duur

30 minuten

60 minuten

De les wordt gegeven in

Engels

Vaardigheden

Structurele ingenieurstechnieken

Beschikbaarheid typische week

(GMT -05:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Leren werken met Inventor, van beginner tot en met expert.
In overleg met jou zullen we bepalen welke behoefte de leerling heeft en kan de les gemaakt worden, zodat het aansluit op jouw behoefte.
Voor deze lessen is het boek 'Basiboek Inventor' van R.Boeklagen handig als naslagwerk.

Sketchup (pro) is een gebruiksvriendelijk programma waarmee je op een snelle manier een 3 dimensionele voorstelling kan maken. Hoewel je dit jezelf kan aanleren via tutorials op internet , zijn er een aantal basisregels die je je best van in het begin kan aanleren. Dit bespaart je veel ergernis en frustratie.
Hierbij zou ik je graag helpen.

Ik geef les aan zowel beginners als gevorderden, een les wordt steeds op maat opgesteld volgens jouw behoeften.

Wist je dat je met sketchup ook meteen je plan in 2D kan bekomen, zonder extra overtekenen of gebruik van andere (teken)programma's?

Is het uur waarop jij kan toch niet aangegeven als beschikbaar, neem dan toch even contact op om te kijken wat we kunnen doen.

I start with the theory of the topic and then extend my work to handle the specific subject. I have good and long experience teaching and following students' progress from different countries and cultures. I can deal with students who have limited and normal engineering knowledge.

My name is Abdi and i have been teaching interior architecture and general design lessons for several of years. I have graduated from University of Westminster (Interior Architecture - 1st Class Honours) in 2013. I am comfortable teaching College and University students as well as adults looking to enter the interior design profession. I understand as creative individuals, we all process information differently, therefore my teaching methods will be tailored to your requirements. The lessons time slots will also be scheduled around your availability.

Regardless of your experience, I believe that I can teach you Vectorworks in order to accomplish what you need. My typical lesson are usually between 2-3 hours. I have been teaching this software since 1212. I still us this software during my design projects. I teach college students to adults that are looking to step into the interior design and Architecture industry.

Course description:

This comprehensive course is designed for architects, designers, engineers, and creatives who are passionate about 3D modeling and parametrics. You will learn to master Rhino 3D, a powerful 3D modeling software, as well as Grasshopper, a parametric plugin that allows you to generate complex shapes using visual programming.

Course objectives:

Learn how to use Rhino's basic and advanced tools to create accurate and detailed 3D models.
Master the concepts of parametric modeling using Grasshopper to generate dynamic and adaptive shapes.
Understand how Rhino and Grasshopper integrate to automate design processes and improve efficiency.
Create real-world projects ranging from designing simple geometric shapes to complex, custom structures.
Course content :

Introduction to Rhino 3D: Interface, basic commands, and navigation in the 3D workspace.
Advanced modeling techniques: Creation of surfaces, solids and networks of curves.
Introduction to Grasshopper: Understanding the logic of visual programming and its applications in parametric design.
Parametric Design: Using Grasshopper to create complex shapes based on variables and constraints.
Practical application: Completing a complete project by combining Rhino and Grasshopper, from design to completion.
Prerequisites: No specific prerequisites are necessary for this course. However, a basic knowledge of 3D design or modeling software is a plus.

Target audience :

Architects and designers wishing to deepen their skills in 3D modeling and parametric design.
Engineers and technicians interested in design automation and the integration of digital solutions into their creative process.
Methodology: The course combines theoretical explanations with practical exercises and case studies. Question-and-answer sessions and workshops will allow participants to work on personal projects throughout the training.

Leren werken met Inventor, van beginner tot en met expert.
In overleg met jou zullen we bepalen welke behoefte de leerling heeft en kan de les gemaakt worden, zodat het aansluit op jouw behoefte.
Voor deze lessen is het boek 'Basiboek Inventor' van R.Boeklagen handig als naslagwerk.

Sketchup (pro) is een gebruiksvriendelijk programma waarmee je op een snelle manier een 3 dimensionele voorstelling kan maken. Hoewel je dit jezelf kan aanleren via tutorials op internet , zijn er een aantal basisregels die je je best van in het begin kan aanleren. Dit bespaart je veel ergernis en frustratie.
Hierbij zou ik je graag helpen.

Ik geef les aan zowel beginners als gevorderden, een les wordt steeds op maat opgesteld volgens jouw behoeften.

Wist je dat je met sketchup ook meteen je plan in 2D kan bekomen, zonder extra overtekenen of gebruik van andere (teken)programma's?

Is het uur waarop jij kan toch niet aangegeven als beschikbaar, neem dan toch even contact op om te kijken wat we kunnen doen.

I start with the theory of the topic and then extend my work to handle the specific subject. I have good and long experience teaching and following students' progress from different countries and cultures. I can deal with students who have limited and normal engineering knowledge.

My name is Abdi and i have been teaching interior architecture and general design lessons for several of years. I have graduated from University of Westminster (Interior Architecture - 1st Class Honours) in 2013. I am comfortable teaching College and University students as well as adults looking to enter the interior design profession. I understand as creative individuals, we all process information differently, therefore my teaching methods will be tailored to your requirements. The lessons time slots will also be scheduled around your availability.

Regardless of your experience, I believe that I can teach you Vectorworks in order to accomplish what you need. My typical lesson are usually between 2-3 hours. I have been teaching this software since 1212. I still us this software during my design projects. I teach college students to adults that are looking to step into the interior design and Architecture industry.

Course description:

This comprehensive course is designed for architects, designers, engineers, and creatives who are passionate about 3D modeling and parametrics. You will learn to master Rhino 3D, a powerful 3D modeling software, as well as Grasshopper, a parametric plugin that allows you to generate complex shapes using visual programming.

Course objectives:

Learn how to use Rhino's basic and advanced tools to create accurate and detailed 3D models.
Master the concepts of parametric modeling using Grasshopper to generate dynamic and adaptive shapes.
Understand how Rhino and Grasshopper integrate to automate design processes and improve efficiency.
Create real-world projects ranging from designing simple geometric shapes to complex, custom structures.
Course content :

Introduction to Rhino 3D: Interface, basic commands, and navigation in the 3D workspace.
Advanced modeling techniques: Creation of surfaces, solids and networks of curves.
Introduction to Grasshopper: Understanding the logic of visual programming and its applications in parametric design.
Parametric Design: Using Grasshopper to create complex shapes based on variables and constraints.
Practical application: Completing a complete project by combining Rhino and Grasshopper, from design to completion.
Prerequisites: No specific prerequisites are necessary for this course. However, a basic knowledge of 3D design or modeling software is a plus.

Target audience :

Architects and designers wishing to deepen their skills in 3D modeling and parametric design.
Engineers and technicians interested in design automation and the integration of digital solutions into their creative process.
Methodology: The course combines theoretical explanations with practical exercises and case studies. Question-and-answer sessions and workshops will allow participants to work on personal projects throughout the training.

Good-fit Leraar Garantie

Contacteer Kinta