Introduction to Renewable energy (solar and wind energy) - Nachhilfe

Unterricht anbieten

Introduction to Renewable energy (solar and wind energy)

Von 7.55 Fr /Std

As we know that the whole world is moving towards replacing traditional energy with clean and renewable energy,in recent years, the world has witnessed a significant increase in the use of renewable energy, such as solar, wind, hydro, and geothermal energy. This increase is attributed to several factors, including technological advancements, environmental pressures, and challenges related to climate change.
We will focus our study on the fundamentals of electricity and an introduction to renewable energies, particularly the study of solar energy.

Ort

Online aus Ägypten

Über mich

محمد شرف ، مهندس كهرباء ، ٣٠ سنة خبرة لاكثر من ٥ سنوات بمجال التدريب والتعليم لمواد الهندسة الكهربية والرياضيات وكذلك خبرة عملية بالمصانع ومحطات المياة والتحلية

Bildung

جامعة المنصورة ، كلية الهندسة ، تخصص هندسة القوي والالات الكهربية ، تقدير عام تراكمي جيد جدا ، سنة التخرج عام 2017 ، ثانوي عامة بمجموع 98.3 % ، حاصل علي دبلومة التحكم الالي

Erfahrung / Qualifikationen

خبرة بمجال التدريب والتعليم لمواد الهندسة الكهربية والصناعية وكذلك مواد الرياضيات لطلبة الكليات والثانوية العامة والتعليم الصناعي

Alter

Kinder (7-12 Jahre alt)

Jugendliche (13-17 Jahre alt)

Erwachsene (18-64 Jahre alt)

Seniorinnen und Senioren (65+ Jahre alt)

Unterrichtsniveau

Anfänger

Mittel

Fortgeschritten

Dauer

45 Minuten

Unterrichtet in

Arabisch

Englisch

Fachkenntnisse

Elektroingenieurwesen

Verfügbarkeit einer typischen Woche

(GMT -05:00)

New York

Online via Webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Mathematics (high school, engineering colleges), electrical and mechanical engineering subjects

5.4 Fr /Std

Mathematics lessons at all levels for high school students and engineering colleges, such as calculus and linear algebra, in addition to materials specializing in power engineering and electrical machines, such as electrical circuit materials, electric forces, magnetic fields, automatic control circuits, and PLC programming.

Mehr lesen

the class that i teach are so related together since its my specialist through electrical engineering degree so that i have a very simple and strong way of teaching every course of them, after explaining the subject several times and make sure that the student is 100% well-done , i give a short exam or quiz.

Math and physics lessons in German or English language is a good opportunity to prepare future students for entering exams at the European university/college, help them through first year of their study or simply to get used to hearing lecture material and explanations in English or German in case you think of studying abroad in the future.

Electrical engineering forms the backbone of today's technology. From the distribution of electricity worldwide to the implementation of microcircuits, electrical engineering describes and provides the fundamentals of all principles pertaining to electronics, telecommunications, power systems, renewable energy, machines and mechatronics, etc. Having graduated as an Electrical Engineer I am offering Electrical Engineering I and II tutorials for beginner students at the University of Applied Sciences Upper Austria. I have experience in elaborating and describing the following thematics which are often problematic for students who seek a degree in Electronics Engineering, Computer Engineering, Telecommunication Engineering, and Electrical Engineering:
•Electrical Engineering Basics
•Conductor, Isolator, and Semiconductor Physics
•AC Passive components: Inductors, Capacitors and Resistors
•DC Circuit Analysis (Thevenin, Kirchhoff and Helmholtz approaches)
•Three-phase systems
•Diodes and the PN Junction
•Transistor Physics: BJT/IGBT/MOSFET
•Operational Amplifiers
•Electronic Circuitry (Buffers, Signal Amplifiers, etc)
•Transformer and Electromagnetics Basics

Dear tutor,

Graduate engineers with over 10 years of experience offer tutoring!

Matlab Simulink Bachelor Master exam preparation tutoring

Skills and focus:

• Electrical engineering
• Control engineering
• Computer technology
• E-motor development (PMSM, IPM)
• Matlab, Simulink
• Robotics
• Electrical drives
• Electric machine
• Drive Control
• FEM, analytical modelling
• model-based development
• dSPACE model development
• generators
• Image processing
• Control Algorithms
• M files, Matlab Language
• coding

More information at wiredwhite(.)com

Best regards
dr White / Founder and Managing Director at WiredWhite

Maths and physics homework can be quite difficult, and I understand that, being an Engineering student. That's why I am offering my help regarding any science homework, no matter the grade you are in :). (Of course there are some subjects I can't really help you with but if you ask me, I will tell you if I can solve it or not!)

Primary: Mathematics for students from first grade to eighth grade
Secondary: Mathematics for students from first grade to fourth grade
University/Technical: Mathematics for students in Institutes, Technical and university training center

Digital signal processing and solving derivations. Wireless communication to learn about shadowing factor, modeling techniques, 5g radio bullets, UE measureme nts, Physical unlink and downwind channels, spectrum fundamentals, protocol stack . I can take complex analytical equations and problems to solve quickly. I can also share the material to the students for better understanding and reading. I have trained more than 150 students in Control systems, modulation techniques and solving derivations. I make easier way of notes for better understanding and to become master in basic subjects. I can give Homework on daily basis so that students can solve the problem at home and can clarify the doubts in the next class. Students will also learn some industrial knowledge of 5G technology in industries. Also, configuration of switches, Routers will be an additional advantage. I can take complex derivations like FFT, IFFT, windowing techniques, different algorithms, multi rate signal processing, Microwave engineering. Also i can take C, C++ classes online. I can also take other electronic subjects like Analog circuit design, Computer Architecture, Power electronics subjects. I am certified in Probability and random processes in wireless communications and Soft computing.
I have strong knowledge on hardware configurations, testing with devices, antennas techniques.

If you want to lear the profession, which can't be replaced by AI, here I am to help you with that. If you want to master(or learn) electrical engineering with the essential skills needed to effectively utilize Revit and AutoCAD in the design and documentation of electrical systems within building projects, book first lesson with me. Through a combination of theoretical knowledge and practical hands-on exercises, students will learn how to leverage the powerful features of both software tools to create detailed electrical designs, generate accurate drawings, and collaborate seamlessly with other stakeholders in the construction process.

Key topics covered include:

- Fundamentals of electrical engineering principles and standards.
- Introduction to Building Information Modeling (BIM) concepts and workflows.
- Utilizing Revit for electrical system design, including lighting, power distribution, and circuiting.
- Integrating AutoCAD for detailed drafting, annotation, and documentation of electrical plans.
- Performing electrical load analysis and simulation to ensure system efficiency and compliance.
- Best practices for organizing, managing, and sharing electrical project data effectively.

Whether you are a beginner electrical engineer looking to enhance your skills or a newcomer to Revit and AutoCAD seeking to specialize in electrical design, working with me will provide a solid foundation to excel in the field of building services engineering.

For more information, please do not hesitate to text me.

I offer tutoring in math, physics and electrical engineering. I have developed a program so that we can make maximum use of the tutoring.
In 2 years of experience, my students and I have learned a lot. To be as effective as possible, I also prepare homework so that you can immediately test how much you have learned :)

If you are interested, please contact us and we can agree on the first date :)

best regards
Mirko

Hello everyone and have a nice day,

As a teacher, teacher, student, teacher, professional teacher, and professional student/coaching/unterstützung in MATLAB/Simulink/embedded programme/automatic code generation...etc., you can also contact him.

Use this device for your Master Elektrotechnik-Ingenieur with a new academic design and installation tool in the basic model and use the Matlab/Simulink-Model for embedded System and Regelung on the E-Motoren with a fan and pass it. and Anforderungen.

For more information, please contact us. Unterstützung professionelle in Matlab, Simulink, C, Microcontroller and embedded Programmierung an.

There is a lot of expertise in this article, too:
- Matlab, Simulink,
- S-Functions, Simulink Modelle, Model Basierte Programmierung and Code Generation,
- Electrical drives and E-Motoren,
- STM32 Microcontroller,
- Rapid Prototyping mittels dSPACE HiL-Systeme and Echtzeit-Systeme,
- Power electronics / Leistungselektronik,
- Betreuung and Unterstützung während verschiedenenenenenen der projecterbeiten,
- ...

There is a lot of contact with you.

Very nice greetings

the class that i teach are so related together since its my specialist through electrical engineering degree so that i have a very simple and strong way of teaching every course of them, after explaining the subject several times and make sure that the student is 100% well-done , i give a short exam or quiz.

Math and physics lessons in German or English language is a good opportunity to prepare future students for entering exams at the European university/college, help them through first year of their study or simply to get used to hearing lecture material and explanations in English or German in case you think of studying abroad in the future.

Electrical engineering forms the backbone of today's technology. From the distribution of electricity worldwide to the implementation of microcircuits, electrical engineering describes and provides the fundamentals of all principles pertaining to electronics, telecommunications, power systems, renewable energy, machines and mechatronics, etc. Having graduated as an Electrical Engineer I am offering Electrical Engineering I and II tutorials for beginner students at the University of Applied Sciences Upper Austria. I have experience in elaborating and describing the following thematics which are often problematic for students who seek a degree in Electronics Engineering, Computer Engineering, Telecommunication Engineering, and Electrical Engineering:
•Electrical Engineering Basics
•Conductor, Isolator, and Semiconductor Physics
•AC Passive components: Inductors, Capacitors and Resistors
•DC Circuit Analysis (Thevenin, Kirchhoff and Helmholtz approaches)
•Three-phase systems
•Diodes and the PN Junction
•Transistor Physics: BJT/IGBT/MOSFET
•Operational Amplifiers
•Electronic Circuitry (Buffers, Signal Amplifiers, etc)
•Transformer and Electromagnetics Basics

Dear tutor,

Graduate engineers with over 10 years of experience offer tutoring!

Matlab Simulink Bachelor Master exam preparation tutoring

Skills and focus:

• Electrical engineering
• Control engineering
• Computer technology
• E-motor development (PMSM, IPM)
• Matlab, Simulink
• Robotics
• Electrical drives
• Electric machine
• Drive Control
• FEM, analytical modelling
• model-based development
• dSPACE model development
• generators
• Image processing
• Control Algorithms
• M files, Matlab Language
• coding

More information at wiredwhite(.)com

Best regards
dr White / Founder and Managing Director at WiredWhite

Maths and physics homework can be quite difficult, and I understand that, being an Engineering student. That's why I am offering my help regarding any science homework, no matter the grade you are in :). (Of course there are some subjects I can't really help you with but if you ask me, I will tell you if I can solve it or not!)

Primary: Mathematics for students from first grade to eighth grade
Secondary: Mathematics for students from first grade to fourth grade
University/Technical: Mathematics for students in Institutes, Technical and university training center

Digital signal processing and solving derivations. Wireless communication to learn about shadowing factor, modeling techniques, 5g radio bullets, UE measureme nts, Physical unlink and downwind channels, spectrum fundamentals, protocol stack . I can take complex analytical equations and problems to solve quickly. I can also share the material to the students for better understanding and reading. I have trained more than 150 students in Control systems, modulation techniques and solving derivations. I make easier way of notes for better understanding and to become master in basic subjects. I can give Homework on daily basis so that students can solve the problem at home and can clarify the doubts in the next class. Students will also learn some industrial knowledge of 5G technology in industries. Also, configuration of switches, Routers will be an additional advantage. I can take complex derivations like FFT, IFFT, windowing techniques, different algorithms, multi rate signal processing, Microwave engineering. Also i can take C, C++ classes online. I can also take other electronic subjects like Analog circuit design, Computer Architecture, Power electronics subjects. I am certified in Probability and random processes in wireless communications and Soft computing.
I have strong knowledge on hardware configurations, testing with devices, antennas techniques.

If you want to lear the profession, which can't be replaced by AI, here I am to help you with that. If you want to master(or learn) electrical engineering with the essential skills needed to effectively utilize Revit and AutoCAD in the design and documentation of electrical systems within building projects, book first lesson with me. Through a combination of theoretical knowledge and practical hands-on exercises, students will learn how to leverage the powerful features of both software tools to create detailed electrical designs, generate accurate drawings, and collaborate seamlessly with other stakeholders in the construction process.

Key topics covered include:

- Fundamentals of electrical engineering principles and standards.
- Introduction to Building Information Modeling (BIM) concepts and workflows.
- Utilizing Revit for electrical system design, including lighting, power distribution, and circuiting.
- Integrating AutoCAD for detailed drafting, annotation, and documentation of electrical plans.
- Performing electrical load analysis and simulation to ensure system efficiency and compliance.
- Best practices for organizing, managing, and sharing electrical project data effectively.

Whether you are a beginner electrical engineer looking to enhance your skills or a newcomer to Revit and AutoCAD seeking to specialize in electrical design, working with me will provide a solid foundation to excel in the field of building services engineering.

For more information, please do not hesitate to text me.

I offer tutoring in math, physics and electrical engineering. I have developed a program so that we can make maximum use of the tutoring.
In 2 years of experience, my students and I have learned a lot. To be as effective as possible, I also prepare homework so that you can immediately test how much you have learned :)

If you are interested, please contact us and we can agree on the first date :)

best regards
Mirko

Hello everyone and have a nice day,

As a teacher, teacher, student, teacher, professional teacher, and professional student/coaching/unterstützung in MATLAB/Simulink/embedded programme/automatic code generation...etc., you can also contact him.

Use this device for your Master Elektrotechnik-Ingenieur with a new academic design and installation tool in the basic model and use the Matlab/Simulink-Model for embedded System and Regelung on the E-Motoren with a fan and pass it. and Anforderungen.

For more information, please contact us. Unterstützung professionelle in Matlab, Simulink, C, Microcontroller and embedded Programmierung an.

There is a lot of expertise in this article, too:
- Matlab, Simulink,
- S-Functions, Simulink Modelle, Model Basierte Programmierung and Code Generation,
- Electrical drives and E-Motoren,
- STM32 Microcontroller,
- Rapid Prototyping mittels dSPACE HiL-Systeme and Echtzeit-Systeme,
- Power electronics / Leistungselektronik,
- Betreuung and Unterstützung während verschiedenenenenenen der projecterbeiten,
- ...

There is a lot of contact with you.

Very nice greetings

Der richtige Lehrer Garantie

محمد kontaktieren