Circuit Theory Analysis, Basic and Advanced topics in Electronic

From 6.92 € /h

I have 4 years of experience teaching
you will learn the basics of circuit theory analysis.
operation of semiconductors and their related devices such as Diode, MOSFET, and BJT, and their related applications.
verify your study with CAD tools such as Multisim, Altium, Proteus, ORCAD, and LT Spice.
teaching advanced Courses in Mixed Analog and Digital IC design using Cadence Virtuoso tools and teaching Layout with DRC, LVS, and PEX.
previous experience in Cadence are Design high-Speed Current steering DAC, Flash ADC, and low noise Biopotential Amplifier Using the chopper technique.

Location

Online from Egypt

About Me

I have good experience of three years of teaching Circuit Theory and Basic electronic Devices such as Diode, MOSFET, BJT, Op-Amp, Differential pair, Current Mirror, and Oscillator topics such as Harmonic oscillator and multivibrator. Also related topics such that Feedback, frequency response, and noise analysis.

I have good experience in CAD tools such that Altium, protus, Multisim, OR CAD, and LT spice.
I graduated from the Department of communication and Electronics and Mastered analog and Digital (Mixed) IC circuits and Master Cadence Virtuoso software and VLSI Layout.

Education

graduated from telecomunication and electronics department.
Master degree in Mixed analog and Digital IC Design (Design High speed Current Steering DAC)
GPA: 3.2

Experience / Qualifications

Experience of 3 years in online teaching of the following courses:
Circuit Theory.
Electronics I,II.
Logic Gates.
Analog IC.
DSP.
Analog Communication.

Age

Teenagers (13-17 years old)

Adults (18-64 years old)

Seniors (65+ years old)

Student level

Beginner

Intermediate

Advanced

Duration

60 minutes

90 minutes

120 minutes

The class is taught in

English

Arabic

Skills

Electronic circuits

Telecommunications

Availability of a typical week

(GMT -05:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

4.85

(13)

I offer teaching courses in electrical engineering and electronics (private lessons or holiday courses) to deal with the difficulties encountered by students during their schooling, as part of an individual follow-up that respects the rhythm specific to each.
These courses allow the student to get back to level and regain confidence in all scientific subjects, as well as effectively preparing him for the Baccalaureate, Preparatory Classes or various exams.

COURSE OBJECTIVES AND PEDAGOGICAL APPROACH

Resumption and deepening of fundamental concepts through exercises with course reminders.

Put the student in a situation of questioning and research.

Respond to individual issues and questions

Exercise training in order to achieve real mastery of the content.

Learn to build theoretical reasoning from observable facts or hypotheses.

Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)

This educational approach is effective since it has often led me to interesting results with my students.

Rym

4.85

(13)

Doctor of Physics, teacher for more than 18 years, I support students in scientific preparatory classes (MPSI, PCSI, PTSI, MP, PSI, TSI, Medical Prep, etc.) to master physics in depth and to succeed in their competitive exams.

My approach is based on a rigorous methodology, a detailed analysis of blockages and a tailor-made progression adapted to each student, whether it is to consolidate the basics or achieve excellence.

🎯 What I offer

-Methodical work on understanding fundamental concepts
-Intensive training in solving exercises and competition-type subjects
-Detailed analysis and correction of copies
-Scientific and mental coaching for stress and time management
-Personalized support according to the program (French or Tunisian)

👩‍🏫 Course

-Doctor of Plasma Physics
-DEA and Masters in Fundamental Physics
-Former teacher in preparatory classes and at the Faculty of Medicine of Sfax
-Experience at Paris 11 University
-More than 15 years in higher education and 5 years in French high schools

💻 Terms and Conditions

-Online courses (Zoom, Google Meet, graphics tablet)
- Face-to-face courses by appointment in Tunis
- Personalized support, standard corrections, weekly monitoring

🚀 Objective

Enable each student to understand, reason and perform with confidence.
Rigor, method and requirement... without ever losing the pleasure of science.

Matías

4.85

(13)

Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.

Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.

Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.

Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.

Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.

Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.

Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

Monther

4.85

(13)

Teaching electrical and electronic engineering subjects through examples and practical explanations
Examples of subjects that I can teach in Arabic and English:
Microcontroller - Arduino - Embedded System - Electrical Machine - Power Electronics - Digital System Design - Digital Circuit - Programming in C
And some other core subjects for electrical and electronic engineering major

I am able to teach the Electrical and Electronics Engineering Subject with practical examples, some courses that I can teach:
Microcontroller - Embedded System - Electrical Machine - Power Electronics - Digital System Design - Digital Circuit - Programming in C.

Marko

4.85

(13)

✅ Experienced teacher offering private online physics lessons for all levels.
✅ Fully dedicated and focused on student progress.
✅ Very patient, systematic, and organized.

I teach a wide range of topics in physics, including but not limited to:

5- Physical quantities and units
- Kinematics (types of motion, kinematics of point particles and rigid bodies)
- Dynamics (frictional and inertial forces, Newton's laws)
- Laws of conservation (energy, momentum)
- Theory of collision processes
- Inertial and non-inertial reference frames
- Potential and kinetic energy
- Gravitation and gravity fields
- Oscillatory and wave motions
- Harmonic oscillator
- Doppler effect
- Standing waves
- Sound waves and physical characteristics of sound
- Surface tension and capillary phenomena
- Fluid mechanics
- Temperature and heat
- Calorimetry
- Phase transitions
- Principles of thermodynamics
- Electrostatics
- Electromagnetism
- Kirchhoff's laws
- Electronic circuits
- Dielectrics
- Optics
... and much more.

If there are specific topics you would like to focus on or if you have any questions, feel free to let me know. I am here to help you deepen your understanding of physics.

Abdelali

4.85

(13)

Hello, I am an electrical engineer having an extensive experience as a professor in higher education in engineering science and electrical engineering, as well as great experience as an embedded systems engineer, in EE architecture, ADAS, Testing and validations in the automotive sector.

I offer support courses and training in engineering science subjects, particularly in Automation and Industrial Control, to graduate students. My methodology is based on the acquisition of knowledge and course concepts in a very simple manner and also on practical experience using the most widely used software on the market.

Automation is the discipline that, generally speaking, deals with the control of systems. It is therefore very important in the industrial field, to which it provides solutions, study methods, and systematic analysis approaches. It is a scientific discipline that studies dynamic systems, signals, and information for the purposes of control or decision-making.

This course consists of six chapters, divided as follows:

Chapter 1: Introduction to Automation & Controlled Systems
Chapter 2: Mathematical Modeling of Controlled Systems
Chapter 3: Time & Frequency Analysis of Controlled Systems
Chapter 4: Controlling Systems & Block Diagram Algebra
Chapter 5: Stability & Performance of Controlled Systems
Chapter 6: Correction and Regulation of Controlled Systems

Hossam

4.85

(13)

More than 10 years of experience teaching inside the Emirates for students of Colleges of Technology, Abu Dhabi University, Baynouna Institute and Emirates University. In addition to the work of projects for students and solutions for reports. The possibility of detailed explanation in an easy and simple way.

Items that can be explained:

Electrical and electronic circuits 1 and 2 - Digital circuits - Mathematics such as 1, 2 and 3 - Physics - Measurements - Machines - Engineering economics - Matlab - Communication - control - DSP - signals & systems - PLC

All subjects of electrical engineering department
Electronics I,II, Advanced Electronics, . Electrical and Electronics circuits 1 and 2 - Digital circuits
-Digital logic- Mathematics with all its sections - Physics - Measurements -Instrumentation- Matlab - Analog and Digital Communications - DSP (Digital signal Processing)- signals and systems -Logic design- Control - economic Engineering - networks- PLC - micro.

All electrical engineering subjects related

Dr.

4.85

(13)

This course serves as your comprehensive guide to understanding and harnessing the power of IoT and Arduino to create innovative and intelligent solutions. The Internet of Things has emerged as a game-changing technology that has the potential to transform industries, revolutionize everyday life, and unlock endless possibilities. By connecting physical objects and devices to the internet, IoT enables seamless communication, data exchange, and intelligent decision-making.

4.85

(13)

Hello,

I am an Electronics and Automation Engineer with a specialization in Electromechanical Automation Systems. As a project manager in maritime signaling, I am well-positioned to teach electrical engineering and electronics subjects using practical and real-world examples.

I am available to teach in both French and Arabic, covering a range of topics such as microcontrollers, embedded systems, motors, power electronics, digital system design, digital circuits, and more. Additionally, I offer programming and other core courses in electrical engineering and electronics.

If you are looking for an experienced teacher to help deepen your understanding of electrical engineering and electronics, please do not hesitate to contact me. I am excited to help you achieve your goals.

Ossama

4.85

(13)

Doctor of Electrical Engineering and Associate Professor of Electrical Engineering, I offer quality teaching for BTS, CPGE, University and Technical High School in the following disciplines:

1. Electrical engineering
With extensive expertise in electrical systems, I am able to teach all aspects of electrical engineering, including electrical machines, energy conversion, and electrical networks. My teaching approach emphasizes theoretical understanding and practical applications.

2. Electronics
I am adept at teaching analog and digital electronics, covering components, integrated circuits, and embedded systems. I can impart solid knowledge to train students in current and emerging technologies.

3. Automatic
I offer comprehensive courses in dynamic systems control, whether using conventional (PID) or advanced (nonlinear, real-time) controls. My courses incorporate practical applications tailored to industrial needs.

4. Industrial Computing and Automation
With experience in programming and industrial automation, I can teach topics such as programmable logic controllers, embedded systems, industrial communication protocols, and HMIs. My goal is to equip students to design and optimize complex automated systems.

Ali

4.85

(13)

My lessons are designed to build a strong technical foundation in Electrical and Electronic Engineering, with a clear focus on engineering theory, practical application, and problem-solving skills.

I teach a wide range of core Electrical & Electronic Engineering subjects, including analogue circuits, digital electronics, power systems, power electronics, renewable energy systems, control systems, engineering mathematics, and engineering physics. Each topic is explained using fundamental engineering principles, mathematical modelling, equations, and step-by-step derivations, ensuring students understand not only how solutions work, but why they work.

Lessons regularly involve circuit analysis, system modelling, signal analysis, and simulation-based learning using industry-standard engineering software such as MATLAB, Simulink, ORCAD, and PSpice. I also provide hands-on guidance in embedded systems and microcontroller programming, including Arduino programming, sensor interfacing, and basic real-time system design. Where relevant, I introduce engineering design workflows, helping students convert theoretical knowledge into practical, working engineering systems.

In addition to concept teaching, I support students with university assignments, coursework, lab reports, final-year projects, and exam preparation. This includes structured problem-solving techniques, past-paper practice, numerical analysis, debugging support, and exam strategy tailored to UK universities.

My goal is to help students develop strong engineering fundamentals, analytical thinking, and practical technical skills that are essential for academic success, professional engineering careers, and real-world applications.

Ahmed

4.85

(13)

Fundamentals of electronics engineering, Arduino programming, and smart home circuits

I offer practical and simplified training that starts from the basics of electronics and goes up to the design and programming of smart home and Internet of Things systems, with theoretical explanations and practical applications on real circuits and digital simulations.

Course content:
1. Fundamentals of Electronics

Identifying different electronic components: resistors, capacitors, diodes, transistors, and sensors.

Understanding correct electrical connections

Reading electronic circuits and working with breadboards

2. What is Arduino? And how do we program it?

Introduction to Arduino boards

Explanation of the C++ programming language used with Arduino

How to download code and test projects step by step

3. Design and programming of smart home circuits

Connecting sensors and smart switches

Lighting and electrical appliance control

Designing a system that controls the home using a mobile phone

Introduction to the Internet of Things (IoT) and its connection to home control

4. Controlling the home from a mobile phone

Creating simple control interfaces

Connect using Wi-Fi or Bluetooth

Remote device operation and sensor monitoring

5. Practical training

Real Arduino circuit experiment

Using simulation software such as Tinkercad and Proteus

Practical projects ready for implementation

Who is this course for?

Beginners in the field of electronics

Students interested in Arduino programming

Who wants to create a smart home project?

Anyone who wants to understand how electronics work in a simple and practical way

Sahbi

4.85

(13)

Learn electronics in a simple and practical way, adapted to your school level and needs. These courses are designed for all ages, from primary school to high school, and are available in French and Arabic.

You will learn :

The basics of electronics and electrical circuits
The operation of electronic components (resistors, LEDs, capacitors, etc.)
Simple setups and practical projects
Applying the concepts to the school curriculum

Each lesson is personalized according to the student's age and level, with interactive exercises and clear explanations to facilitate understanding.

Individual or small group online courses
Educational materials in PDF format and explanatory videos
Practical exercises adapted to the school curriculum
Personalized tracking to measure progress

Abdallah

4.85

(13)

I offer online tutoring in High School Mathematics & Physics, University Electronics/Electronic Circuits, and Turkish language.
Lessons are structured, clear, and focused on understanding + practice, with personalized plans, step-by-step solutions, and regular feedback.

Pritty

4.85

(13)

I offer structured and personalized courses in analog and digital electronics, covering everything from circuit fundamentals to integrated circuit (IC) design and system-level concepts. With a PhD in Electronics and academic as well as research experience, I help students build strong technical foundations while developing real-world engineering intuition. My teaching approach combines clear theory, practical examples, problem-solving techniques, and design-oriented thinking. Courses are suitable for undergraduate and master’s students, PhD candidates, and professionals, as well as motivated high-school students preparing for engineering studies. Whether your goal is exam preparation, project support, or gaining confidence in electronics design, I adapt the course content and pace to your needs with professionalism, clarity, and encouragement.