Technical drawing & design and Computer Aided Design - Privélessen

Publiceer een Les

Technical drawing & design and Computer Aided Design

Van 27.23 € /h

Technical drawing and design with related applications by means of a CAD program such as CATIA V5. Below some details regarding technical drawing:
Terminology
Norms
Types of drawings
Basics of orthogonal projection
Views & cuts
3D models
GD&T
Schematics...

Extra informatie

make sure that you have the necessary prerequisites and a PC with a good connection

Locatie

Online vanuit Marokko

Leeftijd

Tieners (13-17 jaar oud)

Volwassenen (18-64 jaar oud)

Niveau van de leerling

Beginner

Gemiddeld

Gevorderden

Duur

60 minuten

De les wordt gegeven in

Engels

Frans

Arabisch

Vaardigheden

Werktuigbouwkunde

Beschikbaarheid typische week

(GMT -05:00)

New York

Online via webcam

Mon

Tue

Wed

Thu

Fri

Sat

Sun

00-04

04-08

08-12

12-16

16-20

20-24

Leren werken met Inventor, van beginner tot en met expert.
In overleg met jou zullen we bepalen welke behoefte de leerling heeft en kan de les gemaakt worden, zodat het aansluit op jouw behoefte.
Voor deze lessen is het boek 'Basiboek Inventor' van R.Boeklagen handig als naslagwerk.

Breed installatie techniek zowel elektrotechnici als werktuigkundige installatie techniek. Denk dan aan alle vakken die hierin voorkomen. Ook wet en regelgeving en technische tekeningen maken. Maar ook theoretische lessen. Eventueel ook de keuzevakken die nodig zijn. Als mede je bpv boek daar geef ik ook hulp bij.

Sketchup (pro) is een gebruiksvriendelijk programma waarmee je op een snelle manier een 3 dimensionele voorstelling kan maken. Hoewel je dit jezelf kan aanleren via tutorials op internet , zijn er een aantal basisregels die je je best van in het begin kan aanleren. Dit bespaart je veel ergernis en frustratie.
Hierbij zou ik je graag helpen.

Ik geef les aan zowel beginners als gevorderden, een les wordt steeds op maat opgesteld volgens jouw behoeften.

Wist je dat je met sketchup ook meteen je plan in 2D kan bekomen, zonder extra overtekenen of gebruik van andere (teken)programma's?

Is het uur waarop jij kan toch niet aangegeven als beschikbaar, neem dan toch even contact op om te kijken wat we kunnen doen.

Need help with mechanics, physics, or thermodynamics? As a 33-year-old civil engineer, I'm happy to help! I'll learn at your own pace, using plenty of examples to illustrate the material. I have years of experience teaching both simple and complex subjects.

The lessons run as follows. First, we look together for the student's biggest stumbling blocks. These can be related to the subject matter as well as to the study method. From there, I work at the pace of the student and encourage them to ask as many questions as possible. I also give tips and tricks, and improve their working methods where necessary. During the lesson I give many examples to make the subject matter more interesting and we solve exercises together. Once practiced from the lesson, I mastered challenging exercises to also test the deeper understanding of the subject matter. In this way I try to optimally prepare the student for his/her exam test.

However, learning should also be enjoyable. That is why I always strive for a bond with the student through a spontaneous and positive approach. I am also very patient. All this to solve and improve the problems.

Are you interested? Don't hesitate to receive me!
Please come!

Tim

My name is Abdi and i have been teaching interior architecture and general design lessons for several of years. I have graduated from University of Westminster (Interior Architecture - 1st Class Honours) in 2013. I am comfortable teaching College and University students as well as adults looking to enter the interior design profession. I understand as creative individuals, we all process information differently, therefore my teaching methods will be tailored to your requirements. The lessons time slots will also be scheduled around your availability.

Regardless of your experience, I believe that I can teach you Vectorworks in order to accomplish what you need. My typical lesson are usually between 2-3 hours. I have been teaching this software since 1212. I still us this software during my design projects. I teach college students to adults that are looking to step into the interior design and Architecture industry.

Courses in math, physics, mechanics, electricity, thermal, thermodynamics, engineering sciences.
Universities & High Schools Professor gives support courses to all categories of students.
Possibility of face-to-face lessons and/or supervision (Teams)
Numerous references in Belgium and internationally (France, Italy, England, UK, Ireland, Maghreb, USA, Israel)
Adaptation according to the information and needs of the student.
Flexibility of the organization according to mutual needs & possibilities.

Course description:

This comprehensive course is designed for architects, designers, engineers, and creatives who are passionate about 3D modeling and parametrics. You will learn to master Rhino 3D, a powerful 3D modeling software, as well as Grasshopper, a parametric plugin that allows you to generate complex shapes using visual programming.

Course objectives:

Learn how to use Rhino's basic and advanced tools to create accurate and detailed 3D models.
Master the concepts of parametric modeling using Grasshopper to generate dynamic and adaptive shapes.
Understand how Rhino and Grasshopper integrate to automate design processes and improve efficiency.
Create real-world projects ranging from designing simple geometric shapes to complex, custom structures.
Course content :

Introduction to Rhino 3D: Interface, basic commands, and navigation in the 3D workspace.
Advanced modeling techniques: Creation of surfaces, solids and networks of curves.
Introduction to Grasshopper: Understanding the logic of visual programming and its applications in parametric design.
Parametric Design: Using Grasshopper to create complex shapes based on variables and constraints.
Practical application: Completing a complete project by combining Rhino and Grasshopper, from design to completion.
Prerequisites: No specific prerequisites are necessary for this course. However, a basic knowledge of 3D design or modeling software is a plus.

Target audience :

Architects and designers wishing to deepen their skills in 3D modeling and parametric design.
Engineers and technicians interested in design automation and the integration of digital solutions into their creative process.
Methodology: The course combines theoretical explanations with practical exercises and case studies. Question-and-answer sessions and workshops will allow participants to work on personal projects throughout the training.

💻 Private lessons – CAD / CAM / FEA (SolidWorks, Inventor, Creo, CATIA, Fusion 360, AutoCAD)

👋 I am Christian, a civil engineer and PhD student in mechanical engineering, with over 15 years of experience in mechanical design and teaching technical software.

I offer personalized courses to learn and master:

💻 CAD / CFAO: SolidWorks | Inventor | Creo | CATIA V5 | Fusion 360 | AutoCAD 2D/3D

🛠️ Simulation and Finite Element Analysis (FEA): NASTRAN, ANSYS, SolidWorks Simulation

📄 Mechanical design and industrialization

🔧 Complex assemblies, mechanical parts, hydraulic and pneumatic systems

📊 Optimization, tolerances and preparation of technical files

🎯 For whom?

Engineering students (technical secondary school or university)

Professionals wishing to train or improve their skills in CAD/CAM/FEA

Students undertaking final year projects (TFE/PFE) requiring modeling, simulations or advanced analyses

🧠 Methodology

🔍 Initial assessment of level and needs

🛠️ Practical courses based on real-world projects and industrial applications

📈 Tailored progression to achieve complete mastery of software and FEA skills

🤝 Support for projects, final year projects, professional development projects and professional preparation

🏭 Thanks to my experience of more than 15 years as a civil engineer, I always link theory to concrete applications and industrial standards, so that you learn immediately usable skills.

📩 Ready to master CAD, CAM and FEA for your projects or career?
Contact me for an initial discussion and a personalized training plan.

Leren werken met Inventor, van beginner tot en met expert.
In overleg met jou zullen we bepalen welke behoefte de leerling heeft en kan de les gemaakt worden, zodat het aansluit op jouw behoefte.
Voor deze lessen is het boek 'Basiboek Inventor' van R.Boeklagen handig als naslagwerk.

Breed installatie techniek zowel elektrotechnici als werktuigkundige installatie techniek. Denk dan aan alle vakken die hierin voorkomen. Ook wet en regelgeving en technische tekeningen maken. Maar ook theoretische lessen. Eventueel ook de keuzevakken die nodig zijn. Als mede je bpv boek daar geef ik ook hulp bij.

Sketchup (pro) is een gebruiksvriendelijk programma waarmee je op een snelle manier een 3 dimensionele voorstelling kan maken. Hoewel je dit jezelf kan aanleren via tutorials op internet , zijn er een aantal basisregels die je je best van in het begin kan aanleren. Dit bespaart je veel ergernis en frustratie.
Hierbij zou ik je graag helpen.

Ik geef les aan zowel beginners als gevorderden, een les wordt steeds op maat opgesteld volgens jouw behoeften.

Wist je dat je met sketchup ook meteen je plan in 2D kan bekomen, zonder extra overtekenen of gebruik van andere (teken)programma's?

Is het uur waarop jij kan toch niet aangegeven als beschikbaar, neem dan toch even contact op om te kijken wat we kunnen doen.

Need help with mechanics, physics, or thermodynamics? As a 33-year-old civil engineer, I'm happy to help! I'll learn at your own pace, using plenty of examples to illustrate the material. I have years of experience teaching both simple and complex subjects.

The lessons run as follows. First, we look together for the student's biggest stumbling blocks. These can be related to the subject matter as well as to the study method. From there, I work at the pace of the student and encourage them to ask as many questions as possible. I also give tips and tricks, and improve their working methods where necessary. During the lesson I give many examples to make the subject matter more interesting and we solve exercises together. Once practiced from the lesson, I mastered challenging exercises to also test the deeper understanding of the subject matter. In this way I try to optimally prepare the student for his/her exam test.

However, learning should also be enjoyable. That is why I always strive for a bond with the student through a spontaneous and positive approach. I am also very patient. All this to solve and improve the problems.

Are you interested? Don't hesitate to receive me!
Please come!

Tim

My name is Abdi and i have been teaching interior architecture and general design lessons for several of years. I have graduated from University of Westminster (Interior Architecture - 1st Class Honours) in 2013. I am comfortable teaching College and University students as well as adults looking to enter the interior design profession. I understand as creative individuals, we all process information differently, therefore my teaching methods will be tailored to your requirements. The lessons time slots will also be scheduled around your availability.

Regardless of your experience, I believe that I can teach you Vectorworks in order to accomplish what you need. My typical lesson are usually between 2-3 hours. I have been teaching this software since 1212. I still us this software during my design projects. I teach college students to adults that are looking to step into the interior design and Architecture industry.

Courses in math, physics, mechanics, electricity, thermal, thermodynamics, engineering sciences.
Universities & High Schools Professor gives support courses to all categories of students.
Possibility of face-to-face lessons and/or supervision (Teams)
Numerous references in Belgium and internationally (France, Italy, England, UK, Ireland, Maghreb, USA, Israel)
Adaptation according to the information and needs of the student.
Flexibility of the organization according to mutual needs & possibilities.

Course description:

This comprehensive course is designed for architects, designers, engineers, and creatives who are passionate about 3D modeling and parametrics. You will learn to master Rhino 3D, a powerful 3D modeling software, as well as Grasshopper, a parametric plugin that allows you to generate complex shapes using visual programming.

Course objectives:

Learn how to use Rhino's basic and advanced tools to create accurate and detailed 3D models.
Master the concepts of parametric modeling using Grasshopper to generate dynamic and adaptive shapes.
Understand how Rhino and Grasshopper integrate to automate design processes and improve efficiency.
Create real-world projects ranging from designing simple geometric shapes to complex, custom structures.
Course content :

Introduction to Rhino 3D: Interface, basic commands, and navigation in the 3D workspace.
Advanced modeling techniques: Creation of surfaces, solids and networks of curves.
Introduction to Grasshopper: Understanding the logic of visual programming and its applications in parametric design.
Parametric Design: Using Grasshopper to create complex shapes based on variables and constraints.
Practical application: Completing a complete project by combining Rhino and Grasshopper, from design to completion.
Prerequisites: No specific prerequisites are necessary for this course. However, a basic knowledge of 3D design or modeling software is a plus.

Target audience :

Architects and designers wishing to deepen their skills in 3D modeling and parametric design.
Engineers and technicians interested in design automation and the integration of digital solutions into their creative process.
Methodology: The course combines theoretical explanations with practical exercises and case studies. Question-and-answer sessions and workshops will allow participants to work on personal projects throughout the training.

💻 Private lessons – CAD / CAM / FEA (SolidWorks, Inventor, Creo, CATIA, Fusion 360, AutoCAD)

👋 I am Christian, a civil engineer and PhD student in mechanical engineering, with over 15 years of experience in mechanical design and teaching technical software.

I offer personalized courses to learn and master:

💻 CAD / CFAO: SolidWorks | Inventor | Creo | CATIA V5 | Fusion 360 | AutoCAD 2D/3D

🛠️ Simulation and Finite Element Analysis (FEA): NASTRAN, ANSYS, SolidWorks Simulation

📄 Mechanical design and industrialization

🔧 Complex assemblies, mechanical parts, hydraulic and pneumatic systems

📊 Optimization, tolerances and preparation of technical files

🎯 For whom?

Engineering students (technical secondary school or university)

Professionals wishing to train or improve their skills in CAD/CAM/FEA

Students undertaking final year projects (TFE/PFE) requiring modeling, simulations or advanced analyses

🧠 Methodology

🔍 Initial assessment of level and needs

🛠️ Practical courses based on real-world projects and industrial applications

📈 Tailored progression to achieve complete mastery of software and FEA skills

🤝 Support for projects, final year projects, professional development projects and professional preparation

🏭 Thanks to my experience of more than 15 years as a civil engineer, I always link theory to concrete applications and industrial standards, so that you learn immediately usable skills.

📩 Ready to master CAD, CAM and FEA for your projects or career?
Contact me for an initial discussion and a personalized training plan.

Good-fit Leraar Garantie

Contacteer Aissa