from10.05USD/ h
Engineering science support courses at home or remotely in Kénitra, Rabat and Casablanca.
Translated by Google. Click to view original.
Hi there. My name is Ayoub professor in industrial sciences, with more than 2 years of experience in tutoring.I offer private lessons in engineering sciences at home in , Kenitra, Rabat and Casabalance or remotely for pupils and students:
• Who has basic difficulties or deficiencies...
• Who want to strengthen the base and get used to the techniques seen throughout the course and which are always useful to know and master.
• Who wish to review the essentials of the previous year's program and get ahead of the program.
These courses are intended for CP-BTS and high school students and are personalized for each student according to their level, ability and motivation, guaranteeing the best marks in the national exam.
Methodology
The course takes place in three stages:
1) Summary and explanation of the course or chapter to work on then target the essentials of the course.
2) Do simple exercises to put the course into practice and apply an effective method of solving and writing exercises.
3) In a third step I give exercises with increasing difficulty that the student will do on his own to test him and put him in a condition to manage independently. We correct this list of exercises together and the unsuccessful exercises are to be redone by the student for the next session.
Location
Online via webcam
At teacher's location: YOUSSEF Web master digital markter, Casablanca, Maroc
At student's location: Around Casablanca, Morocco
At teacher's location: benthami motors, Quartier de Bir Rami, Kénitra, Maroc
|
Use ⊞+wheel to zoom!
General info
Age: | Teenagers (13-17 years old) Adults (18-64 years old) Seniors (65+ years old) |
---|---|
Student level: | Beginner Intermediate Advanced |
Duration: | 60 minutes 120 minutes |
The class is taught in: | French, Arabic, English |
Ask a question
Send a message explaining your needs and Ayoub will reply soon:
The more detail, the better.
Ex. "Hi, when are you available to meet for a lesson?"
Ex. "Hi, when are you available to meet for a lesson?"
Availability of a typical week
(GMT -04:00) New York
Mon | Tue | Wed | Thu | Fri | Sat | Sun | |
---|---|---|---|---|---|---|---|
0 | |||||||
1 | |||||||
2 | |||||||
3 | |||||||
4 | |||||||
5 | |||||||
6 | |||||||
7 | |||||||
8 | |||||||
9 | |||||||
10 | |||||||
11 | |||||||
12 | |||||||
13 | |||||||
14 | |||||||
15 | |||||||
16 | |||||||
17 | |||||||
18 | |||||||
19 | |||||||
20 | |||||||
21 | |||||||
22 | |||||||
23 |
from $10.05At teacher's location
from $10.05Online via webcam
from $12.49At student's home
100% Satisfaction Guarantee
Good-fit Instructor Guarantee
If you are not satisfied after your first lesson, Apprentus will find you another instructor or will refund your first lesson.
Online reputation
- Instructor since November 2021
- Google connected
Availability of a typical week
(GMT -04:00) New York
Mon | Tue | Wed | Thu | Fri | Sat | Sun | |
---|---|---|---|---|---|---|---|
0 | |||||||
1 | |||||||
2 | |||||||
3 | |||||||
4 | |||||||
5 | |||||||
6 | |||||||
7 | |||||||
8 | |||||||
9 | |||||||
10 | |||||||
11 | |||||||
12 | |||||||
13 | |||||||
14 | |||||||
15 | |||||||
16 | |||||||
17 | |||||||
18 | |||||||
19 | |||||||
20 | |||||||
21 | |||||||
22 | |||||||
23 |
from $10.05At teacher's location
from $10.05Online via webcam
from $12.49At student's home
Good-fit Instructor Guarantee
If you are not satisfied after your first lesson, Apprentus will find you another instructor or will refund your first lesson.
Share
You are here
Similar classes
Abdeer
Engineering sciences/Industrial sciences for CPGE/RDM/elasticity/Mechanics of fluids and solids/Industrial computing
As an associate professor of industrial sciences and mechanical engineering, I give private lessons at the following level:
* Engineering science courses for the final class Sciences maths B
* Industrial Sciences courses for scientific CPGE MP/PSI/PTSI
* Course of the mechanical modules of solids.
For schools and faculties:
* RDM and MMC courses
* Mechanical construction course
* Course of industrial computing modules
Youness
ASSOCIATE PROFESSOR I TEACH: PROGRAMMING OF PROGRAMMABLE AUTOMATES (SIEMENS PLCS LADER TIA PORTAL. STEP7...)
I am an associate professor of electrical engineering I offer courses in everything related to the discipline of electrical engineering:
CPGE / BTS / DUT / IUT / DTS / UNIVERSITY / Technical high school
1 Introduction to automation
- Problem and objectives
- API architecture
- API selection criteria
2 PLC programming language
- GRAFCET language
- Method of transcription of a GRAFCET in LADER language
3 Programming Siemens PLCs
- Learn the TIA PORTAL environment
- Hardware and software configuration
4 Implementation of the analog I/O concept
5 Methodology of study and realization of a project
6 Supervision of industrial systems
Sami
Tutoring in Physics, Chemistry, Maths, and Mechanical Engineering
I propose taylor-made tutoring / private lessons for all ages and all levels (up to Bachelor), in all specialities of physics and chemistry, as well as mathematics, and mechanical engineering (up to Master).
Whether it's for helping your children make it through high-school, or you are a student who wants to make the most out of your studies at university, or you are a very enthousiast novice who wants to learn new skills in science, we will design together a learning plan based on your needs and interests.
My philosophy: learning can and should be fun.
I can teach in English, in French, or suomeksi!
Oualid
I give private lessons in Physics - Chemistry - thermodynamics - fluid mechanics - RDM to students from the French or Arabic program.
I give private lessons in Mathematics - Analysis - Matrices - Statistics - Algebra - Geometry - Physics - Chemistry - thermodynamics-fluid mechanics-RDM to students in French or Arabic programs.
Homework help for Baccalaureate students.
preparation for the competition.
For more information, do not hesitate to contact me, guaranteed response in a few minutes up to 6 hours maximum.
Mahfoud
Maths lessons - mechanics - automatic at home high school/bachelor's/master's/engineering school
Former CPGE prep classes students
Aeronautical engineer graduated from ISAE Supaero
Doctorate in Mathematics and applications from Toulouse 3 University
+3 years of experience (+350 hours) in higher education Bachelor / Master / Engineering Cycle
1 year of industry experience
Very good teaching and communication
Rayane
Dynamics for Engineering (Civil / Mechanical / Aerospace / ..)
Dynamics is a branch of physics and engineering mechanics that studies the motion of objects and systems under the influence of forces. In this course, students delve into the principles governing the behavior of particles and rigid bodies in motion. Topics covered include kinematics, which describes the motion without regard to its causes, and kinetics, which focuses on the forces causing the motion. Students learn Newton's laws of motion, the principles of work and energy, and the concepts of impulse and momentum. Additionally, they explore rotational motion, including angular velocity, angular acceleration, and moments of inertia. Through theoretical study and practical applications, students develop the ability to analyze and predict the motion of objects and systems, essential for fields such as mechanical engineering, aerospace engineering, and physics.
Pr. Amina
AGGREGATE PROF: CPGE-UNIVERSITY: Engineering sciences - Mechanical engineering-Automatics-Control
Associate Professor and State Engineer, teacher in public preparatory classes, I give courses in Engineering Sciences for CPGE levels and for university.
Experience of success in course support, monitoring and personalized educational supervision according to the needs of each student.
Professor with a versatile profile, with good experience in the industrial field (Study, design, production, maintenance, etc.) in addition to experience in higher education: course preparation, technical training, project supervision and internships students.
Face-to-face or distance learning courses
Preparation Proctored assignments and module exams
Preparation for competitions
For more information contact me.
Abdellah
Electrical engineering, electronic power, automation
Electrical engineering
Electronic
power Electronic
motor drive
electrical circuit
renewable energy
automation
electrical drive
industriel control
transformer
electrical energy
hight voltage
low volatge
simulation
calculation
etc
C
Excellence Math, Science Mechanical Engineer, Physics - College, High School
Do you want to significantly increase your child's mathematical average?
Do you want it to integrate a selective course?
Do you want it to become autonomous?
For 7 years, I have helped more than 100 students in difficulty from middle school and high school to achieve their goals and regain self-confidence.
My method in 3 points:
- in the short term, significantly increase the average by assimilating the course and preparing for the next tests (assimilating the course, writing files, practicing standard exercises, anticipating the teacher's expectations and test questions, having methods of writing)
- in the medium term, integrate reasoning and work methods (learn to work regularly in this order: assimilation, training exercise, preparation for the test and analysis of the pass test)
- in the long term, set a goal, build the steps to reach this goal, become aware of the SIMPLICITY of math, have confidence in your abilities, release your potential)
Your child can contact me whenever he wants
If you want to increase your child's math results, contact me before the next test!
Matías
Engineering, electronics, programming, robotics and various projects with ARDUINO and ESP32 and RaspberryPi boards
Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics.
Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects.
Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies.
Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life.
Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life.
Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently.
Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!
Clive
Tutoring Mechanics, Statics, Dynamics, Strengths, Construction, Fluidics, Fracture Mechanics, Thermodynamics, Finite Element Method
Are you a HBO or WO student of construction, civil engineering, mechanical engineering, aerospace engineering or industrial product design and do you need extra help / guidance to pass your Mechanics, Statics or Dynamics test?
Please do not hesitate to contact me. I will help you with a patient, efficient and effective method to pass your test.
I also offer help in the following subjects:
- Force effect
- 3D modeling
- Heat theory
- Mechanical Vibration
- Machine parts
Please note: lessons are excl. Preparation time (depending on the subject)
Lessons are given interactively via webcam.
Ayoub
Electrical Engineering Courses for Students :: Beginner and Advanced Levels
Electrical Engineer with more than 6 years of experience, offers personalized training support for future graduates, technicians and engineers:
Module expertise:
- LV/MV Distribution System
- Electrical Network Engineering
- Electrical engineering
- Analog and digital electronics
- Power electronics & VFD Applications,
- Digital Transmission,
- Software Training: Caneco BT, Etap V12.6, ISIS Proteus, Dialux, Rapsody ....
As well, the supervision of students during the end-of-study internships
You're welcome
Tim
Mechanics, Physics, Thermodynamics: Higher education - private lessons.
Need help with mechanics, physics or thermodynamics? As a civil engineer, 30, I am happy to help you! Learn at your pace and with many examples to clarify the subject matter. I have years of experience in learning simple and complex subject matter.
The lessons run as follows. First, we look together for the student's biggest stumbling blocks. These can be related to the subject matter as well as to the study method. From there, I work at the pace of the student and encourage them to ask as many questions as possible. I also give tips and tricks, and improve their working methods where necessary. During the lesson I give many examples to make the subject matter more interesting and we solve exercises together. Once practiced from the lesson, I mastered challenging exercises to also test the deeper understanding of the subject matter. In this way I try to optimally prepare the student for his/her exam test.
However, learning should also be enjoyable. That is why I always strive for a bond with the student through a spontaneous and positive approach. I am also very patient. All this to solve and improve the problems.
Are you interested? Don't hesitate to receive me!
Please come!
Tim
Pr YSF
Electronics, Automation, signal processing, renewable energy, electrical engineering) MATLAB, Networks
Hello, I am a doctor in electrical engineering and associate professor in engineering sciences, experienced in the field of electrical engineering, I offer support courses in the subjects of engineering sciences (electronics, automation, electrical engineering, automation, programming).
Digital electronics
Analog electronic
electromagnetism (propagation of high frequency waves)
Automatic (continuous, sampled)
electrical engineering (transformers, electrical machines, switching power supply)
C / c ++ programming, Assembler, ARM, STM32
renewable energy (wind, PV)
engineering Sciences
RDM
Python,VHDL
PIC Microprocessor and Microcontroller
Signal processing and data acquisition
Engineering Sciences
These courses allow the student to get up to speed and regain confidence in all scientific subjects, just as they prepare him effectively for the Baccalaureate, the Preparatory Classes or various examinations of the engineering classes.
COURSE OBJECTIVES AND PEDAGOGICAL APPROACH
Resumption and deepening of fundamental concepts through exercises with course reminders.
Put the student in a situation of questioning and research.
Respond to individual issues and questions
Exercise training in order to achieve real mastery of the content.
Learn to build theoretical reasoning from observable facts or hypotheses.
Specific preparation for higher education requirements (in-depth content, increase in work capacity, enrichment of scientific background)
This educational approach is effective since it has often led me to interesting results with my students.
Associate professor provides support courses in electrical engineering
Reza
LS-DYNA, ANSYS, MATLAB, ABAQUS, SolidWorks, and Finite Element Modelling (FEM) for Mechanical Engineering Design
I hold a PhD in Mechanical Engineering and currently, I am working as a post-doctoral researcher in the Aerospace Engineering Faculty at TU Delft (Delft University of Technology).
I have extensive experience in teaching various Mechanical design packages, including LS-DYNA, ANSYS, APDL programming, ABAQUS, MATLAB, SolidWorks, Cura, and Symbolic MATLAB.
Some of the finite element modeling and numerical simulations I have worked on include:
- Multiscale finite element modeling for fatigue crack propagation in porous materials.
- Analysis of multiple-layer sandwich structures' resistance to bird-strike impact [Read paper].
- Investigation of debonding propagation in aluminum and glass/epoxy composite joints under fatigue loading using Fracture Mechanics principles.
- Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials.
- Study of the effect of material type, stacking sequence, and impact location on pedestrian head injury in collisions.
If you have any additional questions before starting the class, please don't hesitate to ask me. I am here to help! :)