Adam
    Trusted teacher
    FavouritesAdd to Wish List
    FavouritesAdd to Wish List
    Trusted teacher
    from29.00USD/ h

    Tutoring in Electrical Engineering, Circuit Theory, Analogue and Digital Electronics

    I graduated in Electrical Engineering and Electronics and Telecommunications at the University of Science and Technology(AGH). I will give tutoring in the theory of electrical circuits, electrical engineering and analog and digital systems. I provide additional materials. Welcome.

    Scope of assistance:
    - Electronic semiconductor components
    - Bipolar transistor - working point setting, small signal description, common collector, common emitter, common base
    - Differential amplifier - transition zone, polarization methods
    - Operational amplifier - circuits with an operational amplifier, negative feedback, non-linear amplifier application
    - Linear and pulse stabilizers
    - Analog electronic circuits
    - Digital electronic circuits
    - ADC / DAC converters
    - Current, voltage and magnetism issues
    - Non-isolated converters (boost, buck and buck-boost, SEPIC)
    - Non-isolated converters (flyback, forward, full-bridge, half-bridge, Push-Pull, Ćuk)
    - Resonant and ferroresonant converters
    - selective amplifiers
    - power amplifiers
    -stabilizers with continuous work
    - PLL phase coupling loop
    - network rectifiers
    - switching power supplies
    -high frequency technique and fast switching
    - Kirchoff's laws, delta-star / star-delta transform
    - Thevenin's theorem
    - loop potential method
    - the method of nodal potentials
    - methods of solving DC and sinusoidal current circuits,
    - crosses and filters
    - circuits containing magnetically coupled coils
    - operational amplifiers
    - transmission properties of linear systems
    - three-phase,
    - the phenomenon of resonance,
    - vector (phasor) charts of currents and voltages,
    - transient states - classical method
    I also provide assistance in the field of:
    - matlaba / simulinka, scilab, LTSpice, PSpice, Spice, Tina-TI, Falstad Simulator
    - Interfaces: CAN, I2C, SPI, UART
    - ADC converter
    - designing electronic diagrams in EAGLE, Altium.

    If you have any questions, write to me - I will answer up to 24 hours

    To facilitate cooperation, please include in the e-mail:
    - topics that I am supposed to help with, if you have tasks, you can attach them in the e-mail
    - since when you need help and for how long

    Extra information

    We work on Skype, Teams or Messenger and write together on a virtual board, which allows you to quickly write, paste content and draw (I use a graphic tablet). Each of my students receives a link with notes from all meetings. All you need to do such lessons is a browser and a microphone.
    Benefits?
    - I can see what you write right away and I am able to notice mistakes faster.
    - In my experience, students stress much less when working in this form while sitting in front of their computer
    - You don't waste time commuting
    - I have more dates for such lessons and it will be easier to make an appointment.

    Location

    Online via webcam

    General info

    Age:
    Children (7-12 years old)
    Teenagers (13-17 years old)
    Adults (18-64 years old)
    Seniors (65+ years old)
    Student level:
    Beginner
    Intermediate
    Advanced
    Duration:
    30 minutes
    45 minutes
    60 minutes
    90 minutes
    120 minutes
    The class is taught in:English, Polish

    About Me

    I have been tutoring actively for 6 years. I work professionally as a designer of electronic and power electronics systems. Currently, I am developing autonomous driving at Aptiv company.

    Education

    - diploma of M.Sc. Of Electrical Engineering AGH, completed the specialization: Power Electronics and Electric Drive
    - Diploma of Eng. Electrical engineering; completed module A (electrical networks)
    - Engineering degree in Electronics and Telecommunications (Electronics specialization)
    - laureate of the sessions of the AGH University of Science and Technology 2014, 2015

    Experience / Qualifications

    - diploma of M.Sc. Of Electrical Engineering AGH, completed the specialization: Power Electronics and Electric Drive
    - Diploma of Eng. Electrical engineering; completed module A (electrical networks)
    - Engineering degree in Electronics and Telecommunications (Electronics specialization)
    - laureate of the sessions of the AGH University of Science and Technology 2014, 2015
    I have been tutoring actively for 6 years

    Ask a question

    Send a message explaining your needs and Adam will reply soon:
    The more detail, the better.
    Ex. "Hi, when are you available to meet for a lesson?"

    Availability of a typical week

    (GMT -04:00) New York
    MonTueWedThuFriSatSun
    0              
    1              
    2  Monday at 2:00  Tuesday at 2:00  Wednesday at 2:00  Thursday at 2:00  Friday at 2:00  Saturday at 2:00  
    3  Monday at 3:00  Tuesday at 3:00  Wednesday at 3:00  Thursday at 3:00  Friday at 3:00  Saturday at 3:00  
    4            Saturday at 4:00  
    5            Saturday at 5:00  
    6              
    7              
    8              
    9              
    10              
    11  Monday at 11:00  Tuesday at 11:00  Wednesday at 11:00  Thursday at 11:00  Friday at 11:00    
    12  Monday at 12:00  Tuesday at 12:00  Wednesday at 12:00  Thursday at 12:00  Friday at 12:00    
    13  Monday at 13:00  Tuesday at 13:00  Wednesday at 13:00  Thursday at 13:00  Friday at 13:00    
    14  Monday at 14:00  Tuesday at 14:00  Wednesday at 14:00  Thursday at 14:00  Friday at 14:00    
    15  Monday at 15:00  Tuesday at 15:00  Wednesday at 15:00  Thursday at 15:00  Friday at 15:00    
    16  Monday at 16:00  Tuesday at 16:00  Wednesday at 16:00  Thursday at 16:00  Friday at 16:00    
    17  Monday at 17:00  Tuesday at 17:00  Wednesday at 17:00  Thursday at 17:00  Friday at 17:00    
    18  Monday at 18:00  Tuesday at 18:00  Wednesday at 18:00  Thursday at 18:00  Friday at 18:00    
    19              
    20              
    21              
    22              
    23              
    from $29Online via webcam

    Good-fit Instructor Guarantee


    If you are not satisfied after your first lesson, Apprentus will find you another instructor or will refund your first lesson.

    Online reputation

    • Instructor since September 2022
    • Phone number verified
    • Google connected

    Availability of a typical week

    (GMT -04:00) New York
    MonTueWedThuFriSatSun
    0              
    1              
    2  Monday at 2:00  Tuesday at 2:00  Wednesday at 2:00  Thursday at 2:00  Friday at 2:00  Saturday at 2:00  
    3  Monday at 3:00  Tuesday at 3:00  Wednesday at 3:00  Thursday at 3:00  Friday at 3:00  Saturday at 3:00  
    4            Saturday at 4:00  
    5            Saturday at 5:00  
    6              
    7              
    8              
    9              
    10              
    11  Monday at 11:00  Tuesday at 11:00  Wednesday at 11:00  Thursday at 11:00  Friday at 11:00    
    12  Monday at 12:00  Tuesday at 12:00  Wednesday at 12:00  Thursday at 12:00  Friday at 12:00    
    13  Monday at 13:00  Tuesday at 13:00  Wednesday at 13:00  Thursday at 13:00  Friday at 13:00    
    14  Monday at 14:00  Tuesday at 14:00  Wednesday at 14:00  Thursday at 14:00  Friday at 14:00    
    15  Monday at 15:00  Tuesday at 15:00  Wednesday at 15:00  Thursday at 15:00  Friday at 15:00    
    16  Monday at 16:00  Tuesday at 16:00  Wednesday at 16:00  Thursday at 16:00  Friday at 16:00    
    17  Monday at 17:00  Tuesday at 17:00  Wednesday at 17:00  Thursday at 17:00  Friday at 17:00    
    18  Monday at 18:00  Tuesday at 18:00  Wednesday at 18:00  Thursday at 18:00  Friday at 18:00    
    19              
    20              
    21              
    22              
    23              
    from $29Online via webcam

    Good-fit Instructor Guarantee


    If you are not satisfied after your first lesson, Apprentus will find you another instructor or will refund your first lesson.

    Share


    Matías
    Engineering, electronics, programming, robotics and various projects with ARDUINO and ESP32 and RaspberryPi boards
    Do you dream of mastering the art of electronic design, advanced programming and creating awesome robots? Do not look any further ! I offer personalized courses that will guide you into the exciting world of engineering, with an emphasis on electronics, programming and robotics. Electronics: Learn to create circuits, understand components, and carry out innovative electronics projects. Programming: Immerse yourself in the world of coding and develop programming skills, from classic languages to new technologies. Robotics: Explore the basics of robotics, create autonomous robots, and discover how to bring your ideas to life. Miscellaneous Projects: Use popular platforms like Arduino, Raspberry Pi, and more to bring your unique and exciting projects to life. Whether you're a beginner or looking to deepen your skills, my classes are suitable for all levels. With interactive lessons, challenging projects, and expert guidance, you'll progress quickly and confidently. Don't let your dreams of innovation wait any longer. Join me on this rewarding learning adventure and start creating today!

    Anh
    Resit support - Engineering Tutoring - Aerospace/Mechanical/Electrical/Aeronautical
    Are you facing challenges with your current engineering courses? Are you in a position where you need to resit an exam? Are you considering using professional tutoring/mentoring support to excel in the upcoming (resit) exams? If any of these topics resonate with you, these classes may be what you're looking for. In these special, tailored classes, we will uncover what is it that is potentially holding you back in your performance and understanding, and attack these issues head-on. With this, I will guide, mentor, and facilitate your growth and intuitive technical understanding further. I share my experiences with Aerospace/Aeronautical/Mechanical/Electrical Engineering, helping you develop your skills and techniques to tackle any problem, whilst adapting our lessons to your natural method of learning. Contact me here to introduce yourself and tell me more about the topics that you would like additional support with. This could be, for example, Aero/ Flight Dynamics, Control Systems, Dynamic Structures, Business Data Analysis, or any other topics. Whatever university you are studying at, I am certain that you will leave our sessions fulfilled, inspired, and driven to take on any challenge that may come your way. Contact me now for my availability, so that we can organize your first session as soon as possible. I look forward to meeting you! __________________________________________________________________________________ Previously supported students from top universities such as: UK: - Imperial College London (+ Business School) (ICL) - University College London (UCL) - King's College London (KCL) NL: - Delft University of Technology (TUDelft) - University of Amsterdam - University of Groningen SW - ETH Zurich - Swiss Federal Institute of Technology AU - Queensland University of Technology - University of Queensland - Griffith University __________________________________________________________________________________ A little about myself: My name is Anh; I was born and raised in the U.K. and I have over 8 years of international experience, tutoring Middle School to University Level Maths, Sciences, and Engineering, with 4 years of working experience in the Aerospace and Maritime industry. I have a fun, ambitious, and outgoing personality with a passion for music, cooking, and trying new things. Whilst teaching and mentoring, I am patient and adaptable to the needs of each of my students. I am working as an Engineering Specialist/Consultant, holding: - a degree as a Master of Aeronautical Engineering from Imperial College London, - A*A*A* A-Level Further Maths and Physics, with, - straight A*s in (GCSE) Maths, Physics, Chemistry, Biology, English, Geography. I was also previously mentored and tutored myself and having been through the problems and achievements first-hand, I want to help others do so as well.

    Ngwend
    Instructor for adult and young students, instructeur pour adultes et étudiants
    Hello, I'm here to share my knowledge and help you to grow up yours , Bonjour, je suis ici pour partager mes connaissances et vous permettre d'augmenter les vôtres . Je suis d'humeur agréable, j'aime et sais faire rire, afin de travailler dans la bonne humeur et la détente Cordialement

    Ayoub
    Electrical Engineering Courses for Students :: Beginner and Advanced Levels
    Electrical Engineer with more than 6 years of experience, offers personalized training support for future graduates, technicians and engineers: Module expertise: - LV/MV Distribution System - Electrical Network Engineering - Electrical engineering - Analog and digital electronics - Power electronics & VFD Applications, - Digital Transmission, - Software Training: Caneco BT, Etap V12.6, ISIS Proteus, Dialux, Rapsody .... As well, the supervision of students during the end-of-study internships You're welcome

    Miguel
    Basic and Advanced Mathematics for students who have problems with all types of mathematical subjects
    Primary: Mathematics for students from first grade to eighth grade Secondary: Mathematics for students from first grade to fourth grade University/Technical: Mathematics for students in Institutes, Technical and university training center

    el Mehdi
    Building Your Future with Robotics and Automation: A Dynamic Course in Electronics
    Hello, I am an Electronics and Automation Engineer with a specialization in Electromechanical Automation Systems. As a project manager in maritime signaling, I am well-positioned to teach electrical engineering and electronics subjects using practical and real-world examples. I am available to teach in both French and Arabic, covering a range of topics such as microcontrollers, embedded systems, motors, power electronics, digital system design, digital circuits, and more. Additionally, I offer programming and other core courses in electrical engineering and electronics. If you are looking for an experienced teacher to help deepen your understanding of electrical engineering and electronics, please do not hesitate to contact me. I am excited to help you achieve your goals.

    Maurilio
    PhD in Electrical and Computer Engineering teaches Math, Physics, and Electrical Engineering
    Hello! If you are a student struggling with Math, Physics, or Electrical Engineering I can help you :) I have 10+ years of experience in private teaching and I am very patient with my students. I own a PhD degree in Electrical and Computer Engineering and I speak English fluently.

    Marko
    Physics for all levels from Elementary school to University
    ✅ Experienced teacher offering private online physics lessons for all levels. ✅ Fully dedicated and focused on student progress. ✅ Very patient, systematic, and organized. I teach a wide range of topics in physics, including but not limited to: 5- Physical quantities and units - Kinematics (types of motion, kinematics of point particles and rigid bodies) - Dynamics (frictional and inertial forces, Newton's laws) - Laws of conservation (energy, momentum) - Theory of collision processes - Inertial and non-inertial reference frames - Potential and kinetic energy - Gravitation and gravity fields - Oscillatory and wave motions - Harmonic oscillator - Doppler effect - Standing waves - Sound waves and physical characteristics of sound - Surface tension and capillary phenomena - Fluid mechanics - Temperature and heat - Calorimetry - Phase transitions - Principles of thermodynamics - Electrostatics - Electromagnetism - Kirchhoff's laws - Electronic circuits - Dielectrics - Optics ... and much more. If there are specific topics you would like to focus on or if you have any questions, feel free to let me know. I am here to help you deepen your understanding of physics.

    Edward
    Engineering Class! Any Math and Engineering Subjects!
    I am teaching Math (Algebra, Trigo, Geometry, and Calculus). I teach Engineering subjects. I also teach children. I'm an Electrical Engineer with a great understanding of Math and Engineering Science. I also teach CALCULATOR TECHNIQUES. YOU CAN EASILY SOLVE MATH PROBLEMS!

    Arianit
    Electrical Engineering I and II (Electrical Physics, Basics and Introduction, Electronics)
    Electrical engineering forms the backbone of today's technology. From the distribution of electricity worldwide to the implementation of microcircuits, electrical engineering describes and provides the fundamentals of all principles pertaining to electronics, telecommunications, power systems, renewable energy, machines and mechatronics, etc. Having graduated as an Electrical Engineer I am offering Electrical Engineering I and II tutorials for beginner students at the University of Applied Sciences Upper Austria. I have experience in elaborating and describing the following thematics which are often problematic for students who seek a degree in Electronics Engineering, Computer Engineering, Telecommunication Engineering, and Electrical Engineering: •Electrical Engineering Basics •Conductor, Isolator, and Semiconductor Physics •AC Passive components: Inductors, Capacitors and Resistors •DC Circuit Analysis (Thevenin, Kirchhoff and Helmholtz approaches) •Three-phase systems •Diodes and the PN Junction •Transistor Physics: BJT/IGBT/MOSFET •Operational Amplifiers •Electronic Circuitry (Buffers, Signal Amplifiers, etc) •Transformer and Electromagnetics Basics

    Mohamed
    ELECTRICAL ENGINEERING TEACHER, university teacher
    you will learn Electrical Engineering power systems Engineering Electrical Circuits Electrical Machines measurements instrumentation transformer working principle induction motor , synchronous motor, dc series motor, shunt motor, compound motor

    Monther
    Electrical and Electronics Engineering, Microcontroller Projects
    Teaching electrical and electronic engineering subjects through examples and practical explanations Examples of subjects that I can teach in Arabic and English: Microcontroller - Arduino - Embedded System - Electrical Machine - Power Electronics - Digital System Design - Digital Circuit - Programming in C And some other core subjects for electrical and electronic engineering major I am able to teach the Electrical and Electronics Engineering Subject with practical examples, some courses that I can teach: Microcontroller - Embedded System - Electrical Machine - Power Electronics - Digital System Design - Digital Circuit - Programming in C.

    Fatima
    Basic Algebra, Calculus 1, Calculus 3, Linear Algebra, Mathematics for Electrical Engineering, Electric Circuits 1, Electric Machines
    Embark on a mathematical journey with a comprehensive course designed to build a solid foundation in Calculus 1 and 3, along with Linear Algebra. Whether you're a beginner or looking to deepen your understanding, these classes will enhance your analytical thinking and problem-solving skills. Learn to navigate through fundamental concepts to advanced applications, essential for any aspiring engineer or mathematician. Dive into the specialized world of Mathematics tailored for Electrical Engineering, where theory meets practical application. This course is structured to clarify the mathematical concepts that are pivotal in understanding complex electrical systems. Perfect for students who aim to master the mathematical tools necessary for a successful career in engineering. Electric Circuits 1 is your gateway to understanding the basics of electrical engineering. This course will guide you through the fundamental principles of electric circuits, including current, voltage, power, and energy concepts, along with the techniques for circuit analysis. Ideal for beginners who want to get to grips with the building blocks of electrical systems. Explore the dynamic field of Electric Machines, where you'll learn about motors, generators, and transformers. This course will provide you with the knowledge to understand machine design, function, and application. Suitable for students who wish to gain a practical understanding of how electric machines are pivotal to modern technology.

    Diana
    Arduino programming, basic electronics, CAD design
    In this class, you will be able to acquire knowledge in electronics and electricity, circuit assembly, basic concepts, plan design, etc. What is necessary to be able to program robotics projects with the use of Arduino and 3D and 2D design if you need it

    Haris
    Electrical Engineering, MATH, Power system engineering
    Experienced professional with a background in Transmission System Operations (TSO) for four years and currently employed at the European Network of Transmission System Operators for Electricity (ENTSO-e) . Additionally, I have accumulated two years of experience as a visiting professor, in Polytechnic University of Tirana showcasing a comprehensive understanding of the energy sector and a commitment to sharing knowledge through academic engagement.