AssimCourses in Maths and Electricity and in computer science.
I am an engineer in Embedded Systems with a solid foundation in physical math (electronics, proofreading, electrotechnical and automatic, Arduino, STM32) and computer science (C language, python, algorithmics, java). my courses are intended for all levels including Sup.
AbdellahElectrical engineering, electronic power, automation
Electrical engineering Electronic power Electronic motor drive electrical circuit renewable energy automation electrical drive industriel control transformer electrical energy hight voltage low volatge simulation calculation etc
WidadeCourse in thermodynamics, electricity and mechanics
Dilpomée of the polytechnic school of Brussels in 2015 and having 5 years of experience in private lessons, I offer my courses for your difficulties in thermodynamics, electricity and mechanics
MatíasElectronics, programming and robotics with ARDUINO and ESP32
ARDUINO is a free hardware microcontroller. It is very useful for learning electronics and coding at the same time. It is very estimating thanks to that we can solve problems and look at the results physically. Thanks to the size of its community and the openness of its philosophy, information is widely accessible. Arduino allows us to undertake countless projects of all kinds. In a way, it's a small door through which you can easily access the world of makers. Among others. In the particular case of the arduino, my main goal is to stimulate creativity and curiosity. In addition to allowing my student to acquire a level of competence which allows him to function alone. I am used to working with people of different ages. I believe in segmentation, visualization of progress, objective results and practice. Beyond these general lines, there is no rule or magic method. Some things work with some students and not with others. Adapting to needs is really the goal of private lessons. So I will do my best to find what motivates and helps my student.
MarkoPhysics for all levels from Elementary school to University
✅ Experienced teacher gives private online lectures for all levels in physics ✅ Fully dedicated and focused on student progress ✅ Very patient, systematic and organized I teach many fields of physics, but some of them are the following: - physical quantities and units - kinematics (movement types, kinematics of material point and rigid body) - dynamics (frictional and inertial forces, Newton's laws) - laws of conservation - theory of collision processes - inertial and non-inertial systems - potential and kinetic energy - gravitation and gravity field - oscillatory and wavy motions - harmonic oscillator - Doppler's effect - standing waves - sound waves and physical sound characteristics - surface tension and capillary phenomena - fluid mechanics - temperature and heat - calorimetry - phase switches - principles of thermodynamics - electrostatics - electromagnetism - Kirchoff's law - electronic circuits - dielectrics - optics ... etc.
HaiderElectrical drives, machining, energy theory tutoring for students (Bachelor and Master)
Welcome! I have already completed my master’s degree in mechanical engineering and am currently doing my doctorate. Tutoring is offered in ✔ Electric drives ✔ Machining production ✔ Energy theory for students (Bachelor and Master). When contacting please Class / study / training and subject notify! During the online tutoring, you can see my PC desktop as I explain the subject matter to you and handwrite the tasks, chapter by chapter. At the end of the tutoring, you will receive files with solutions or notes. I'm looking forward to your messages.
CarlosElectricidad, te ayudo con tus tareas, exámenes, trabajos todo para que aprendas y apruebes
Estudiante de 3er año de ingeniería eléctrica de la USB Preparador del departamento de matemáticas puras y aplicadas y del departamento de conversión y transporte de energía Estoy dispuesto a ayudarte para que aprendas y logres aprobar. Cómo preparador puedo armar un material teórico-practico con diferentes ejercicios para así explicarme mejor, esto tiene como objetivo un mayor aprendizaje para el alumno.
HassanRobotics , Electronics and Programing Instructor for student adult and kids
ROBOTICS ,ELECTRONICS AND PROGRAMING Instructor for student adult and kids Arduino EV3 #C C .++ 1- Handling all types of courses, students with fresh start in electrical engineering ,intermediate students with medium level , and graduated engineers with high level of knowledge in the sector . 2- Teaching the course in theoretical and practical, transforming the course into live projects indoor and outdoor 3- Performing Drone -Quad Copter- project for 2 Art advertising company in Nasr city in Cairo Egypt. This project initially is a course I taught to students and sold the project to 2 Art . 4- Co operating with Helwan Metal industry Factory , they hand over to us out of service production lines , and we implement reverse engineering , to put back for operation . 5- Teaching the course in several stages, through creating a subsystem in each stage, and in final stage , creating final system and product .
AmjadMath, Electronic Circuit, programing C Arduino and Phisyc
For All engineer students and high school students .. I am an Electronics Engineer with a 3.43 GPA (THE FIRST, HONOR DEGREE ) and more than 8 years experience, while my on-the-job experience has afforded me a well-rounded skill set, including first-rate time management and problem-solving skills, I excel at: 1. Math. 2. Programming 3. electronic circuits.. 4. Simulation.
Kaoutarprogramming course in Matlab and Simulink component
Pour toute personne souhaitons apprendre le logiciel Matlab ou programmation matlab ou l'utilisation du composant SimuLink. This class is for anyone desiring to learn Matlab programming or specifically on using the Simulink component of Matlab.
Lakshmi RavikularamanProgramming and Hardware Designing of Microcontroller 8051
Programming the 8051 Microcontroller. In this course you can be able understand the history and how a microcontroller is organized inside the internal structurer. The principle in the digital computing and the way of stored programmed concept. We will spend few hours on the basics of digital computing and will understand the hardware architecture of microcontroller 8051. The assembly language programming of 8051. The Programming on the 8051 resources along with the complier activity. We will learn to use the keil compilers and do the software simulation both in assembly and C. We will understand how to dump the hex file to the microcontroller. The detailed way of organizing and designing the memory map for 8051 will be studied with address map calculation. will design sample boards. Finally will design the 8051 based boards of Analog signal acquisition to microcontroller 8051 and delivering to a Digital to analog converter for Realtime signal functionality.
MontherElectrical and Electronics Engineering
Teaching electrical and electronic engineering subjects through examples and practical explanations Examples of subjects that I can teach in Arabic and English: Microcontroller - Embedded System - Electrical Machine - Power Electronics - Digital System Design - Digital Circuit - Programming in C. And some other core subjects for electrical and electronic engineering major I am able to teach the Electrical and Electronics Engineering Subject with practical examples, some courses that I can teach: Microcontroller - Embedded System - Electrical Machine - Power Electronics - Digital System Design - Digital Circuit - Programming in C.
ViswambherElectronic Power Conversion : Course which deals with converters, inverters and other power electronic components.
EPC could be a nightmare for SET students at the TU Delft, especially those who do not have a background in Electrical Engineering. I am a second year SET student with an Electrical Engineering background. I scored a 9/10 on my first attempt and would be offering classes in TU Campus. In this class , we go through all the concepts taught in the class, have doubts sessions and exam preparation sessions. Even if you are an absolute beginner, there is nothing to worry since I would explain everything in as simple terms as simple terms as possible. Group lessons are also available.
AbdelaliElectricity / Electronics Course: Electric Circuits & Systems
Hello, I am an engineer and doctor in electrical engineering and professor of higher education in engineering sciences, experienced in the field of electrical engineering, I offer for graduate students support courses and training in the subjects engineering sciences, in particular in electrical circuits and electricity. My methodology is based on the acquisition of knowledge and course concepts in a very simple way and also on practice using the most widely used software on the market. The "electrical circuits" course is an essential element of the "engineering sciences" module, or industrial engineering sciences, which brings together scientific disciplines related to the engineering profession, particularly in the field of electrical engineering. . It deals with the basics of electricity: from the notion of a circuit, to the various existing electrical components, to the resolution of problems and exercises using general theorems. At the end of this course, the student must be able to: Analyze in continuous mode and in sinusoidal mode the electrical circuits based on passive components; Use the theoretical knowledge necessary for solving electrical problems; Use the theoretical knowledge necessary for the proper conduct of practical work; Carry out and analyze electrical circuits on design and simulation software used by engineers; I also give courses and training in: Electrical and electronic circuits Automatic Industrial regulation Signal processing C / c ++ programming, Assembler, PIC, Arduino Matlab LabVIEW PIC microcontroller Microprocessor
AnhOnline Engineering Tutoring - Aerospace/Mechanical/Electrical: Easy and Effective!
In these Engineering Classes, I will teach, mentor, and facilitate your growth and intuitive technical understanding. I will share my experiences with Aeronautical/Mechanical/Electrical Engineering, helping you develop your skills and techniques to tackle any problem, whilst adapting the lesson to your natural method of learning. Contact me now with the topics of which you would like support... It could be Flight Dynamics, Control Systems, Dynamic Structures, or even Business Data Analysis. Whatever university you are studying at, whether it is TU Delft or Leiden University, I am certain you will leave our sessions fulfilled, inspired, and driven to take on any challenge which may come your way. Contact me soon for my limited availability. I little about myself: My name is Anh; I am born and raised in the U.K. and I have over 7 years of international experience tutoring Middle School to University Level Maths and Sciences, with 3 years in the Aeronautical Engineering industry. I have a fun, ambitious and outgoing personality with passions in music, cooking, and trying new things. Whilst teaching and mentoring, I am also patient and adaptable to the needs of each of my students. I am working as an Engineering Specialist/Consultant, holding a degree as a Master of Aeronautical Engineering from 1 of the Top 10 World Universities, A*A*A* A-Level Further Maths and Physics, with straight As and A*s in (GCSE) Maths, Physics, Chemistry, Biology, English, Geography and Religion. I was also previously mentored and tutored myself and having been through the problems and achievements first-hand, I want to help others do so as well.